| Age | Commit message (Collapse) | Author |
|---|
|
Print warning regardless of locale, avoid warning if key is zero width.
Problem reported by Karl Berry in http://bugs.gnu.org/23665 .
* src/sort.c: (key_warnings): change conditions for 'leading spaces'
warning.
* tests/misc/sort-debug-warn.sh: adjust tests accordingly.
|
|
Easier troubleshooting of individual 'sort --debug' messages.
Discussed in http://bugs.gnu.org/23665 .
* tests/misc/sort-debug-warn.sh: add progress number before each sort
invocation.
|
|
* src/dircolors.hin: Reduce the list by replacing all specific
mentions of "color" with the pattern "*color*". This will also
cater for other entries like "konsole-256color".
Fixes http://bugs.gnu.org/23542
|
|
* NEWS: Mention the bug fix.
* src/nl.c (proc_body, proc_footer): Reset numbering here too.
* doc/coreutils.texi (nl invocation): Adjust for behavior change.
* tests/misc/nl.sh: Add a test case.
|
|
* stc/stat.c (human_fstype): Add file system ID definition,
and use "smb2" as the name.
* NEWS (Improvements): Mention the change.
Fixes http://bugs.gnu.org/23516
|
|
* src/id.c (main): When configured with --enable-gcc-warnings and using
the very latest gcc built from git, building would fail with this:
src/id.c:200:8: error: assuming signed overflow does not occur when \
simplifying conditional to constant [-Werror=strict-overflow]
bool default_format = (just_user + just_group + just_group_list
^~~~~~~~~~~~~~
Rewrite to use bool-appropriate operators.
|
|
* tests/df/skip-duplicates.sh: Skip the test when there is no
'/' entry listed by df, which was seen in certain chroot setups.
|
|
Ensure I/O errors are detected (and terminate seq), preventing seq
from infloop (or running for long time with a large
range) upon write errors or ignored SIGPIPE. Examples:
seq 1 inf > /dev/full (seq_fast)
seq 1.1 0.1 inf >/dev/full (print_numbers)
* src/seq.c (io_error): A new function to diagnose appropriate
stdio errors and exit the program with failure status.
(seq_fast, print_numbers): Explicitly check for write errors
and terminate the program with diagnostic.
* tests/misc/seq-io-errors.sh: Test error detection with /dev/full.
* tests/misc/seq-epipe.sh: Test error detection with broken pipes.
* tests/local.mk: Add new tests.
* NEWS: Mention the fix.
|
|
* src/stat.c (human_fstype): Add file system ID definition,
and use "wslfs" as the name.
* NEWS (Improvements): Mention the change.
Fixes http://bugs.gnu.org/23273
|
|
* src/yes.c (main): For large inputs only write a single
diagnostic for write errors.
* tests/misc/yes.sh: Test when /dev/full is available.
|
|
* src/sleep.c (main): Allow ERANGE since we allow "inf" values.
* src/timeout.c (parse_duration): Likewise.
* tests/misc/sleep.sh: New file. Tests for sleep(1).
* tests/misc/timeout-parameters.sh: Add case for newly allowed
$LDBL_MAX. Also use returns_ throughout the file. Also avoid
small timeout values which might give false failures under load.
|
|
* cfg.mk (sc_prohibit_expr_unsigned): expr uses intmax_t internally
when GMP is not available, so flag any uses of unsigned limits.
* tests/misc/timeout-parameters.sh: Remove the overflow related
to UINT_MAX as it's handled by the following case. Change the
following case from 99... to $TIME_T_OFLOW to be more expressive
in what it's actually testing. Directly check that commands succeed,
rather than inspecting $? afterwards.
* tests/dd/skip-seek-past-dev.sh: Guard against large device sizes.
* tests/id/setgid.sh: Protect: Guard against large group IDs.
* tests/misc/cut-huge-range.sh: Tweak comment to avoid syntax check.
It's tempting to simplify to just skip the test if expr fails,
but SIZE_MAX > INTMAX_MAX is the common case.
|
|
* tests/cp/parent-perm-race.sh: This new race introduced in
commit v8.25-5-g632eda5 is quite hard to hit, but is due to
`ls > fifo` doing write()/close()/exit() once `cp` has
open() the source fifo. Then the subsequent comparison of the
destination file may fail due to the file being missing or empty.
Previously `ls` generated output that was independent of `cp`.
Now we must wait for `cp` to finish before inspecting the
destination file that it wrote.
|
|
* tests/mkdir/p-v.sh: Set fail=1 when compare fails: the latter only
sets a non-Zero return code; evaluating that is up to the caller.
|
|
* src/seq.c (isnan): Define macro.
(scan_arg): Add check if the given argument is NaN, and exit with
a proper error diagnostic in such a case.
(usage): Document it.
* tests/misc/seq.pl: Add tests.
* doc/coreutils.texi (seq invocation): Document the change.
* NEWS (Changes in behavior): Mention the change.
|
|
* src/seq.c (main): Exit with an error diagnostic when the given
step value is Zero.
(usage): Document it.
* doc/coreutils.texi (seq invocation): Likewise.
* tests/misc/seq.pl: Add tests.
* NEWS (Changes in behavior): Mention the change.
Reported by Маренков Евгений in:
http://bugs.gnu.org/23110
|
|
* src/stat.c (human_fstype): Add file system ID definition.
* NEWS (Improvements): Mention the change, moving the previously added
"prl_fs" change note from "Changes in behavior" to here.
Fixes http://bugs.gnu.org/23283
|
|
* src/stat.c (human_fstype): Identify the parallels file system.
Also tag as remote so that tail(1) doesn't use inotify, which
fails to detect changes made outside a VM.
Fixes http://bugs.gnu.org/23143
|
|
The problematic code computed a struct tm in one time zone, and
then printed it or converted it to a string in another. To be
portable the same time zone needs to be used for both operations.
On GNU platforms this is not an issue, but incorrect output can be
generated on System V style platforms like AIX where time zone
abbreviations are available only in the 'tzname' global variable.
Problem reported by Assaf Gordon in: http://bugs.gnu.org/23035
* NEWS: Document the bug.
* src/date.c (show_date):
* src/ls.c (long_time_expected_width, print_long_format):
* src/pr.c (init_header):
* src/stat.c (human_time): Use localtime_rz instead of localtime,
so that the time zone information is consistent for both localtime
and time-formatting functions like fprintftime and nstrftime. For
'stat' this change is mostly just a code cleanup but it also
causes stat to also print nanoseconds when printing time stamps
that are out of localtime range, as this is more consistent with
what other programs do. For programs other than 'stat' this fixes
bugs with time zone formats that use %Z.
* src/du.c, src/pr.c (localtz): New static var.
(main): Initialize it.
* src/du.c (show_date): New time zone argument, so that localtime
and fprintftime use the same time zone information. All callers
changed.
* tests/misc/time-style.sh: New file.
* tests/local.mk (all_tests): Add it.
* tests/misc/date.pl: Test alphabetic time zone abbreviations.
|
|
* gl/lib/regcomp.c.diff: Remove file, now that gnulib's
regcomp.c compiles regex.c with -Wno-unused-parameter.
* gl/lib/regex_internal.h.diff: Likewise.
* gl/lib/regex_internal.c.diff: This file induced a change to ensure
that the "Idx" type was unsigned and to remove a few "VAR < 0"
comparisons. These days, it is probably fine to stay in sync with
gnulib/glibc's copies
of these files, so remove these patches, too.
* gl/lib/regexec.c.diff: Likewise.
Prompted by a report by Assaf Gordon and a suggestion from Paul Eggert.
|
|
Mainly for:
*bdb72bc6 set-permissions: fix compilation on Cygwin
* bootstrap: Sync with gnulib.
* gl/lib/regcomp.c.diff: Regenerate against latest gnulib.
|
|
* tests/split/filter.sh: Use OFF_T_MAX-1 rather than OFF_T_MAX
as the size of a test file, to avoid false failure on an XFS file
system (or any file system permitting a file of size OFF_T_MAX).
Reported as http://bugs.gnu.org/22931
|
|
POSIX recommends avoiding -a and -o, for good reason.
src/test.c (usage): Mention that inherent ambiguities exist with
binary -a and -o.
Problem reported by Martin Gebert in: http://bugs.gnu.org/22909
|
|
sort, tail, and uniq now support traditional usage like 'sort +2'
and 'tail +10' on systems conforming to POSIX 1003.1-2008 and later.
* NEWS: Document this.
* doc/coreutils.texi (Standards conformance, tail invocation)
(sort invocation, uniq invocation, touch invocation):
Document new behavior, or behavior's dependence on POSIX 1003.1-2001.
* src/sort.c (struct keyfield.traditional_used):
Rename from obsolete_used, since implementations are now allowed
to support it. All uses changed.
(main): Allow traditional usage if _POSIX2_VERSION is 200809.
* src/tail.c (parse_obsolete_option): Distinguish between
traditional usage (which POSIX 2008 and later allows) and obsolete
(which it still does not).
* src/uniq.c (strict_posix2): New function.
(main): Allow traditional usage if _POSIX2_VERSION is 200809.
* tests/misc/tail.pl: Test for new behavior.
|
|
Problem reported by Yanyan Jiang 蒋炎岩 in: http://bugs.gnu.org/22769
* doc/coreutils.texi (sort invocation):
Mention possibility of 'sort -o F F' data loss during crashes.
|
|
* src/date.c (main): Free TZ variable to pacify valgrind, guarded
by IF_LINT.
|
|
* src/split.c (lines_rr): Reinstate the conditional
setting of the WROTE boolean, as otherwise split -n r/1 would
consume all input when all --filter commands are stopped.
There was a test in place to check for this, but
it was incorrect as detailed below.
(input_file_size): Immediately disallow --number with
non seekable inputs, as such an invocation is not currently
generally supported and will fail as the data overflows
the internal buffer.
* tests/split/l-chunk.sh: Adjust to again disallow -n /dev/zero.
Also change all '&& fail=1' checks to use the 'returns_ 1' form.
* tests/split/filter.sh: Change the no longer supported /dev/zero
case to a regular $OFF_T_MAX file (supported on XFS for example).
Also fix the timeout(1) commands so they're not subject to
pipefail issues.
|
|
* src/stty.c (usage): Remove an erroneous call to translate an
empty string, added in commit v8.23-112-g564f84a, which results
in the gettext header being printed for translated languages.
* THANKS.in: Remove the now committer.
* NEWS: Mention the bug fix.
|
|
* tests/cp/parent-perm-race.sh: Add timeouts so that the test does
not wait forever on GNU/Hurd. This does not fix the underlying
bug but at least lets the tests make progress.
Problem reported by Nelson H.F. Beebe in: http://bugs.gnu.org/22624
Also, check that 'cp' actually copies the data; this is a better
test anyway, and simplifies the test code.
Also, avoid unlikely race if 'pid' is set in the environment.
|
|
Problem reported by Nelson H.F. Beebe in: http://bugs.gnu.org/22624
Other problems also fixed: basically, the code got confused because
GNU/Linux reports that /dev/zero has size zero.
* src/split.c (input_file_size): Now takes struct stat *, not just
size. Always store the first buffer. All callers changed. Treat
/dev/zero as an infinitely-large file, both on GNU/Linux where
fstat and lseek say its size is zero, and on GNU/Hurd where they
say the size is OFF_T_MAX.
(cwrite): Return true on success.
(bytes_split): Don't try to read past EOF, and stop if a write fails.
(lines_rr): Omit stray check for ignorable errno.
(main): Get file size only when n_units > 1, since that's the only
time it is needed. Defer most of the work to input_file_size.
* tests/split/l-chunk.sh: Adjust tests to match new behavior
on oddball inputs.
|
|
* src/date.c (usage): The colon is used in the timezone offset
since commit v8.24-64-g17bbf6c.
* THANKS.in: Remove committer.
Fixes http://bugs.gnu.org/22491
|
|
Solaris Studio 12 on sparc (not x86) will not remove
unused functions, thus leaving a reference to an
undefined program_name symbol from emit_try_help().
* src/system.h (emit_try_help): Change from an inline function
to a macro, so that the inline function is not actually
defined in libstdbuf.c.
Fixes http://bugs.gnu.org/22430
|
|
* NEWS: Add header line for next release.
* .prev-version: Record previous version.
* cfg.mk (old_NEWS_hash): Auto-update.
|
|
* NEWS: Record release date.
|
|
* tests/tail-2/wait.sh: Restrict inotify specific test portion
to local file systems and also not with ---disable-inotify specified.
Failure noticed on NFS.
|
|
* tests/rm/rm1.sh: Also remove the group write bit which
was required on one NFS setup at least. Note u-w was
enough to deny file creation, g-w was also required to
deny file removal.
* tests/rm/cycle.sh: Likewise.
* tests/mv/perm-1.sh: Likewise.
|
|
* tests/cp/preserve-slink-time.sh: Add a delay between the
ln and the cp so that there is enough difference between
the timestamps so GPFS won't discard the update.
Reported by Assaf Gordon.
|
|
* tests/misc/shred-passes.sh: Specify an exact amount to shred,
to avoid running out of simulated random data on file systems
with a large st_blksize like GPFS for example.
Reported by Assaf Gordon.
|
|
tests/tail-2/F-headers.sh and test/tail-2/retry.sh fail on
on remote file systems due to tail going into inotify mode
due to not being able to determine the remoteness of the
non existent files.
* src/tail.c (any_non_remote_file): A new function used
to disable inotify when there are no open files, as
we can't determine remoteness in that case.
* NEWS: Mention the bug fix.
|
|
* gnulib: Update to latest where the only change is to
not unconditionally enable leaf optimization for fts on NFS,
as it was seen to abort() with some NFS servers as per:
https://bugzilla.redhat.com/1299169
This affects utilities that traverse directories like
cp, rm, chmod etc.
* NEWS: Adjust the improvement message to leave only XFS.
|
|
* tests/misc/head-c.sh: Further increase the limit to 8MB over
the base test command. 5.1MB was seen as minimum extra needed
on FreeBSD 9.3 x86_64.
|
|
* tests/rm/dangling-symlink.sh: The effective delay was only
1.5s. So delay before the operation, and increase the iteration
count by 1 to increase the delay to 6.3s. This failure was
noticed once on a FreeBSD 10.2 x86_64 virtual machine.
* tests/dd/stats.sh: Remove quotes on sleep argument
to ensure arguments are accumulated appropriately.
* tests/du/move-dir-while-traversing.sh: sleep before operation,
to increase the effective delay from 1.6s to 3.2s.
* tests/tail-2/flush-initial.sh: Likewise.
* tests/tail-2/pipe-f2.sh: Sleep first so that the effective delay
matches the commented value.
|
|
* tests/rm/r-root.sh: This test was seen to ERROR due to
sed input not having a terminating '\n'. Therefore just skip
with diagnostics upon failure to adjust the error output with sed.
Reported by Assaf Gordon.
|
|
* tests/install/create-leading.sh: Ensure $PWD is quoted.
Reported by `make dist-check`.
|
|
Mainly for:
* dce117a sig2str: list all signals on FreeBSD >= 7
* cff4b38 acl-permissions: port to USE_ACL==0 platforms
|
|
* init.cfg (dump_mount_list_): A new function to output the
system mount list.
* tests/df/df-symlink.sh: Call dump_mount_list_ upon failure.
* tests/df/over-mount-device.sh: Likewise.
* tests/df/problematic-chars.sh: Likewise.
* tests/df/skip-rootfs.sh: Likewise.
* tests/df/total-verify.sh: Likewise.
* tests/df/unreadable.sh: Likewise.
|
|
* tests/df/df-symlink.sh: Only check the symmetry of
the source <-> target lookup, when the source is only mounted once,
which isn't the case if '.' is a BTRFS subvolume for example.
Reported by Assaf Gordon on a default OpenSUSE 42.1 install.
|
|
* src/copy.c (copy internal): Remember directories irrespective
of their link count, because on some file systems like BTRFS,
directories always have a link count of 1.
|
|
* tests/misc/date.pl: This test was dependent on perl
unconditionally calling the system localtime() as date(1) does.
However perl has its own configure checks in place to avoid buggy
localtime implementations. Therefore comment out this test
as a FIXME for now. This test was seen to fail on FreeBSD 10
where localtime() returns nonsense values instead of failing
for arguments >= 2^56.
|
|
* tests/misc/head-c.sh: Further increase the limit, to account
for the fact that head(1) needs at least 1.576MB over the base test
command on FreeBSD 10. 4MB should be enough headroom while
still providing over allocation protection.
Reported by Assaf Gordon.
|
