| Age | Commit message (Collapse) | Author |
|---|
|
* init.cfg (get_min_ulimit_v_): Increase the determined
virtual memory limit for the command by a page size
to avoid alignment issues causing false failures for
subsequent runs.
* tests/misc/cut-huge-range.sh: Be defensive and match
the cut invocations under test, more closely with the
form used to determine the VM memory limit.
This was noticed on i686 linux at:
http://hydra.nixos.org/build/28990456
|
|
* Makefile.am (dist-hook): Ensure all files are writable
so that extracted tarballs are easy to remove, without
getting prompts about removing read-only files.
Reported by Benno Schulenberg.
|
|
* cfg.mk (sc_emit_mandatory_arg_note): Add new syntax check.
|
|
* cfg.mk (sc_prohibit_and_fail_1): Remove 'env' from
the exclusion list.
* tests/misc/env.sh: Adjust accordingly.
* tests/misc/help-version.sh: Likewise.
|
|
* tests/misc/kill.sh:
- verify kill -[lt] support multiple parameters.
- verify kill -[lt] fail with (some) invalid parameters.
- Use returns_1 ... || fail=1, rather than ... && fail=1.
|
|
We were erroneously skipping blanks in the marked comparison
_after_ the key start offset was applied.
* src/sort.c (debug_keys): Don't skip starting blanks
if already handled by begfield().
* tests/misc/sort-debug-keys.sh: Add a test case.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/22155
|
|
* src/stat.c (human_fstype): Add "overlayfs", and tag it as "remote"
to ensure that tail continues to use the more conservative polling mode.
* README-release: Remove a stale comment about updating fremote()
in tail.c. Also give a link to *_SUPER_MAGIC definitions
not in the standard linux/magic.h location.
* NEWS: Mention that this file system is recognized.
|
|
procps, bash >= 4.4, and util-linux >= 2.23
all have the -L option to output a table.
* src/kill.c (main): Have -L synonymous with -t.
Luckily there is no signal that begins with 'L'.
* tests/misc/kill.sh: Update the test.
|
|
* tests/misc/kill.sh: Add first tests for kill.
* tests/local.mk: Reference the new test.
|
|
* NEWS: Use a standard version specification.
* doc/coreutils.texi: Fix incorrect grammar.
* src/df.c: Update a stale comment.
* src/copy.c: Fix incorrect spellings.
* src/factor.c: Likewise.
* src/ls.c: Likewise.
* src/pr.c: Likewise.
* src/relpath.c: Likewise.
* src/shred.c: Likewise.
* src/sort.c: Likewise.
* src/split.c: Likewise.
* src/stdbuf.c: Likewise.
* tests/misc/seq-precision.sh: Likewise.
|
|
These are no longer useful and can impact viewing
patches in some mail programs for example.
* src/cksum.c: Remove ^L characters.
* src/comm.c: Likewise.
* src/kill.c Likewise.
* src/ln.c Likewise.
* src/nl.c Likewise.
* src/pr.c Likewise.
* src/ptx.c Likewise.
* src/split.c Likewise.
* src/tr.c Likewise.
* src/tsort.c Likewise.
* src/uniq.c Likewise.
* src/wc.c Likewise.
* cfg.mk (sc_prohibit-form-feed): A new syntax check.
|
|
* src/sort.c (usage): Mention --debug in KEYDEF paragraph.
|
|
* README, doc/coreutils.texi (Introduction, sort invocation):
Suggest 'sort --debug' more prominently.
|
|
* src/sort.c (usage): Avoid mentioning the implementation,
rather focusing on the result of the operation.
|
|
Reported by Rich Burridge in: http://bugs.gnu.org/22087
* configure.ac (HAVE_UT_HOST, HAVE_C_LINE, stdbuf):
Pacify picky compilers that complain about unreachable statements.
|
|
* doc/coreutils.texi (mv invocation): Add a sentence to clarify that
mv(1) will only replace empty directories in the target, and fail with
a diagnostic otherwise. Discussed at:
http://lists.gnu.org/archive/html/coreutils/2015-12/msg00000.html
|
|
The character 'K' representing numeric user input can be confusing,
especially in the context where it can be suffixed by the multipliers
K, M, G, etc.
Use NUM instead.
* doc/coreutils.texi (head invocation): Replace @var{k} by @var{num}.
Also change @var{count} in the paragraph about the obsolete option
syntax.
(tail invocation): Likewise. Furthermore, adjust the option order to
alphabetical sorting.
* src/head.c (usage): s/K/NUM/ in as placeholder in the -c and -n
options. Furthermore, print the actual DEFAULT_NUMBER instead of the
hard-coded 10.
* src/tail.c (usage): s/K/NUM/ in as placeholder in the -c and -n
options. Add "[+]" to clarify that NUM may optionally be preceded by
this sign. Remove the redundant explanation of the optional '+' prefix
for NUM, as that is now clear from the option description above.
Suggested by Dan Jacobson in http://bugs.gnu.org/22042
|
|
* man/head.x: Add "SEE ALSO" section referencing tail(1).
* man/tail.x: Add "SEE ALSO" section referencing head(1).
Suggested by Dan Jacobson in http://bugs.gnu.org/22041
|
|
Use a consistent date in the generated man pages
even if SOURCE_DATE_EPOCH is not set.
* Makefile.am: Generate .timestamp in the tarball.
* man/local.mk: Pass .timestamp if available to help2man.
* man/dummy-man: Don't bother with the year in the stub.
Reported in http://bugs.debian.org/806321
|
|
Sync with version 1.47.3 which provides these significant changes:
- support for reproducible builds by using $SOURCE_DATE_EPOCH.
- Adjust spacing of italic text at roman/italic boundaries.
|
|
* tests/init.sh (compare_): Only fall back to cmp without
the POSIX defined -s option, where this is not available.
|
|
* doc/local.mk (constants.texi): Avoid calling makeinfo unless
the constants derived from tail and shred have changed.
This avoids a dependence on makeinfo from patched sources,
and avoids an expensive makeinfo call for developers.
|
|
* doc/coreutils.texi (uniq invocation): Fix the description of
problematic input to say "blank lines" rather than "two or more
blank lines".
(tr invocation): Clarify that -s only works with SET1 when
not translating (when SET2 not specified). Also explicitly
state in examples where blank lines are deleted.
Also add "deleting" to the menu item.
* src/tr.c (usage): Improve the -s summary to say it always
operates on the last specified SET.
|
|
* doc/coreutils.texi (tail invocation): Provide an example using awk
to convert tail ==> file <== headers to file: prefixes on each line.
Suggested by Stephen Shirley.
|
|
fallocate can allocate extents beyond EOF via FALLOC_FL_KEEP_SIZE.
Where there is a gap (hole) between the extents, and EOF is within
that gap, the final hole wasn't reproduced, resulting in silent
data corruption in the copied file (size too small).
* src/copy.c (extent_copy): Ensure we don't process extents
beyond the apparent file size, since processing and allocating
those is not currently supported.
* tests/cp/fiemap-extents.sh: Renamed from tests/cp/fiemap-empty.sh
and re-enable parts checking the extents at and beyond EOF.
* tests/local.mk: Reference the renamed test.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/21790
|
|
* src/md5sum.c (digest_check): Update a matched_checksums bool upon
matched checksum, and fail (loudly unless --status is specified)
if there were no matches. Also change properly_formatted_lines
to a bool while at it since we don't need to track the plurality.
* tests/misc/md5sum.pl: Add a test case.
Suggested by Jim Meyering.
|
|
* doc/coreutils.texi (md5sum invocation): Document the new option.
* src/md5sum.c (digest_file): Return an empty digest to indicate
a missing file.
(digest_check): Don't fail or output status given an empty checksum.
(usage): Document the new option.
(main): Process and validate the new option.
* tests/misc/md5sum.pl: Add new test cases.
* NEWS: Mention the new feature.
Fixes http://bugs.gnu.org/15604
|
|
To support "md5sum,sha*sum:"
Suggested by Bernhard Voelker.
|
|
This can be useful if you want to further process data
from process substitutions. For example:
datagen | tee >(md5sum --tag) > >(sha256sum --tag) | sort
* doc/coreutils.texi (tee invocation): Mention that -p is
useful with pipes that may not consume all data.
Add an example, similar to the one above.
* THANKS.in: Add Jirka Hladky.
|
|
* tests/ls/stat-failed.sh: Skip the test if 'd' is returned as the type,
and document where this was seen. Also flag failure to write small
temp files during the test as an error rather than a failure.
Fixes http://bugs.gnu.org/21130
|
|
* src/local.mk: Run `mkdir -p src` in all our explicit rules,
as in a VPATH build the src/ dir is only created at configure time
as a side effect of dependency tracking generation.
|
|
|
|
* src/c99-to-c89.diff: Remove file.
* src/local.mk (EXTRA_DIST): Remove it from this list.
* README (Pre-C99 build failure): Update section.
|
|
discussed in:
http://lists.gnu.org/archive/html/coreutils/2015-10/msg00091.html
* src/csplit.c: (save_line_to_file): check fwrite failures, report
and exit immediately instead of deferring to 'close_output'.
* tests/misc/csplit-io-err.sh: test fwrite failure using LD_PRELOAD.
* tests/local.mk: add new test.
|
|
* src/stat.c (human_fstype): Add new file system ID definitions.
* NEWS: Mention the improvement.
|
|
programs may not be built due to missing system dependencies,
or any program can be excluded at configure time with
--enable-no-install-program. So ensure we're not testing the
system versions in these cases.
* init.cfg (print_ver_): Call require_built_ first.
* tests/misc/tty-eof.pl: Skip programs not built.
* tests/Coreutils.pm (run_tests): Likewise.
* tests/misc/ls-misc.pl: Use 'env test' rather than abs path.
* tests/misc/test-diag.pl: Likewise.
* tests/local.mk: Adjust include order for dependencies.
* tests/misc/arch.sh: Remove redundant calls to require_built_.
* tests/misc/chroot-fail.sh: Likewise.
* tests/misc/groups-dash.sh: Likewise.
* tests/misc/groups-version.sh: Likewise.
* tests/misc/stdbuf.sh: Likewise.
* tests/cp/acl.sh: Remove problematic call to print_ver_ [gs]etfacl.
* tests/mv/acl.sh: Likewise.
* cfg.mk (sc_env_test_dependencies): A new syntax check to enforce
specifying dependencies with print_ver_ for programs
specified through the env command.
* du/bigtime.sh: Add new print_ver_ dependencies.
* du/max-depth.sh: Likewise.
* dd/ascii.sh: Likewise.
* tests/ls/capability.sh: Likewise.
* tests/ls/root-rel-symlink-color.sh: Likewise.
* tests/misc/chroot-fail.sh: Likewise.
* tests/misc/readlink-fp-loop.sh: Likewise.
* tests/misc/sort-debug-keys.sh: Likewise.
* tests/readlink/can-e.sh: Likewise.
* tests/readlink/can-f.sh: Likewise.
* tests/readlink/can-m.sh: Likewise.
* tests/tail-2/inotify-race.sh: Likewise.
* tests/tail-2/inotify-race2.sh: Likewise.
* tests/touch/no-create-missing.sh: Likewise.
* tests/touch/no-dereference.sh: Likewise.
* tests/misc/printenv.sh: Tweak to avoid syntax check trigger.
* tests/misc/help-version.sh: Likewise.
* tests/misc/yes.sh: Likewise.
* tests/misc/printf-quote.sh: Use previously unused $prog.
* configure.ac (EXTRA_MANS): Add $gl_no_install_prog to the list
so that check-x-vs-1 syntax check is satisfied.
|
|
It's better to be consistent even though spacing is insignificant:
http://www.in-ulm.de/~mascheck/various/shebang/#blankrequired
|
|
A side effect of this cleanup is we no longer
depend on our own kill command being built.
* init.cfg (require_trap_signame_): A new function to verify
that the shell supports specifying traps by signal name.
(require_kill_group_): A new function to ensure the shell
supports sending a signal to a group.
* tests/du/move-dir-while-traversing.sh: Ensure trap supports
signal names.
* tests/misc/stty-invalid.sh: Likewise.
* tests/misc/stty-pairs.sh: Likewise.
* tests/misc/stty-row-col.sh: Likewise.
* tests/misc/stty.sh: Likewise.
* tests/misc/sort-compress.sh: Likewise. Also simplify trap call.
* tests/install/trap.sh: Likewise.
* tests/misc/timeout.sh: Likewise.
* tests/dd/stats.sh: Likewise. Also use default kill command.
* tests/misc/timeout-group.sh: Likewise.
|
|
* init.cfg (require_dirent_d_type_): Don't use df -x
to exclude XFS, since this depends on a correct mtab
which is brittle and often not correct within chroots.
* tests/d_type-check: Check also the d_type of files,
which excludes XFS appropriately. Specify all argument
and return types to avoid truncated pointers being passed,
which skipped the test due to crashes on x86_64 at least.
Simplify the C library lookup by reusing the interpreter's.
chroot issue reported at https://bugzilla.redhat.com/1263341
|
|
* src/paste.c (main): Use our styled wrapper for quotearg_colon().
* cfg.mk (sc_prohibit-quotearg): A new syntax check to avoid
future uses of unstyled quotearg to one of the internal slots,
and thus destined for diagnostic output.
|
|
* src/paste.c (main): Setting the quoting style to "escape"
went against the intent of the comment about presenting
doubled backslashes to the user. Instead use "c-maybe"
which is the only mode which avoids doubled backslashes,
and provides protection against arbitrary control characters.
* tests/misc/paste.pl: Adjust accordingly.
|
|
* src/ls.c (decode_switches): Set "shell-escape" if isatty().
* doc/coreutils.texi (ls invocation): Update the defaults description.
* NEWS: Mention the change in behavior. It should not have
backwards compat issues, but mentioning here just in case.
|
|
* src/printf.c (usage): Mention the new format.
(print_formatted): Handle the quoting by calling
out to the quotearg module with "shell-escape" mode.
* doc/coreutils.texi (printf invocation): Document %q.
* tests/misc/printf-quote.sh: New test.
* tests/local.mk: Reference new test.
* NEWS: Mention the new feature.
|
|
This is mainly noticeable when the multi-byte code
within ls.c is triggered by multi-byte quotes.
$ seq 200000 | xargs touch
$ time ls-old -U --quoting=locale --hide-control-chars >/dev/null
real 0m0.483s
$ time ls-new -U --quoting=locale --hide-control-chars >/dev/null
real 0m0.430s
* src/ls.c (quote_name): Avoid rescanning the output looking for
unprintable chars when we know the quoting mode already escapes them.
* tests/misc/ls-misc.pl: Add tests for all quoting modes, with and
without -q, to verify this assumption.
|
|
* doc/coreutils.texi (ls invocation): Describe the new
'shell-escape' and 'shell-escape-always' quoting options.
* src/ls.c (usage): Mention the new quoting options.
* tests/misc/ls-misc.pl: Add a test for 'shell-escape'
|
|
* src/test.c (test_syntax_error): Reuse verror() rather than
open coding the error output format.
(term): Don't hardcode '' quoting.
(main): Likewise.
|
|
Quote file names using the "shell-escape" or "shell-escape-always"
methods, which quote as appropriate for most shells,
and better support copy and paste of presented names.
The "always" variant is used when the file name is
embedded in an error message with surrounding spaces.
* cfg.mk (sc_error_shell_quotes): A new syntax check rule
to suggest quotef() where appropriate.
(sc_error_shell_always_quotes): Likewise for quoteaf().
* src/system.h (quotef): A new define to apply shell quoting
when needed. I.E. when shell character or ':' is present.
(quoteaf): Likewise, but always quote.
* src/*.c: Use quotef() and quoteaf() rather than quote()
where appropriate.
* tests/: Adjust accordingly.
|
|
Includes support for "shell-escape" from quotearg
|
|
* src/md5sum.c: Use the same file name escaping method used
when generating and checking checksums. I.E. ensure a single line
per file by starting the line with '\' for any file name containing '\n'
and replacing those with "\\n".
* NEWS: Move the item from changes in behavior to improvements,
since this is no longer a backwards incompat change when
processing stdout status messages.
* tests/misc/md5sum.pl: Remove quotes from expected status output.
* tests/misc/sha1sum.pl: Likewise.
|
|
Related to commit v8.24-61-g6796698 this provides
more consistent quoting, as quotearg_colon() defaults
to "literal" quoting by default, while quote()
provides appropriate quoting for diagnostics by default.
* gl/modules/randread: Depend on quote module rather than quotearg.
* gl/lib/randread.c: Used quote() not quotearg_colon().
* src/: Likewise.
* src/shred.c: Likewise. Also avoid unnecessary quoting
introducing overhead when wiping names.
* cfg.mk: Relax the matching expression to allow
"qname" variables as used in shred.c to satisfy the check.
* tests/: Adjust accordingly.
|
