| Age | Commit message (Collapse) | Author |
|---|
|
* tests/tail-2/wait.sh: Without inotify, skip a portion of the test
that checks that -F never outputs from a tailed descriptor
after the followed name is recreated, because tail_forever()
doesn't guarantee that.
Noticed at http://hydra.nixos.org/build/22766288
|
|
* tests/misc/uniq-perf.sh: Use our standard 10s timeout,
which is sufficient to trigger the failure and also
avoids a false failure on slow/loaded systems.
Noticed at http://hydra.nixos.org/build/22766288
|
|
* src/sync.c (sync_arg): Initialise variable to avoid
unitialized access if assert is disabled.
* src/head.c (elide_tail_bytes_file): Support this function
with ---presume-input-pipe and larger files,
which regressed with commit v8.23-47-g2662702.
(elide_tail_lines_file): Likewise.
* src/dd.c (dd_copy): Explicitly don't try to ftruncate()
upon failure to lseek() (the existing check against
st_size was already protecting that).
* src/factor.c (factor_using_squfof): Assert (only when
linting due to performance) to avoid the implication of
divide by zero.
* src/od.c (read_block): Remove dead code.
* src/tac.c (tac_seekable): Likewise.
* src/ls.c (gobble_file): Likewise.
|
|
Now that we depend on gettext >= 0.19.2 remove the workaround
for issues in autopoint 0.18.3. Note the scheme currently used in
newer gettext (autopoint) to avoid these issues requires
autoconf >= 2.69, therefore we update this requirement also.
Note the gettext version dependence from gnulib comes from
gnulib using gettext macros, and coreutils indirectly depends on
the gettext module due to:
http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=commitdiff;h=41dca647
bootstrap will then update m4/po.m4 and thus require a
supportng gettext version.
* bootstrap: Remove moot warning (resyncing with gnulib).
* configure.ac (AC_PREREQ): Change to 2.69 (now 3 years old).
|
|
* tests/ln/hard-to-sym.sh: Only call framework_failure_ when ln
returns success.
|
|
* src/copy.c (CAN_HARDLINK_SYMLINKS): Don't enable use of linkat()
on Darwin 14, as the gnulib fallback emulation there doesn't
preserve ownership and timestamps etc. This fixes a test failure
in tests/cp/link-symlink.sh
* tests/cp/link-deref.sh: Adjust accordingly.
|
|
* src/system.h: This was inadvertently ineffective due to
a typo in commit v8.9-10-ge1aaf89 (Jan 2011), but has
not caused any issues, so remove.
|
|
When the parent directory exists and has a different
default context to the final directory, the context
was incorrectly left as that of the parent directory.
* src/mkdir.c (process_dir): Because defaultcon() is called for
existing ancestors (as it must be to avoid races), then we must
unconditionally call restorecon() on the last component due to
the already documented caveat with make_dir_parents().
Alternatively you could temp disable o->set_security_context
around make_dir_parents(), but that would be subject to races.
* tests (tests/mkdir/restorecon.sh): Add a TODO for improvement.
Reference mknod and mkfifo with print_ver_.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/20616
|
|
* tests/df/df-output.sh: Allow for multiple spaces in the header line
of 'df', resulting from alignment with disk sizes >= 10TB.
|
|
* tests/cp/no-ctx.sh: Scope of `var=val func` is inconsistent
across shells, so avoid that construct with functions.
* tests/df/no-mtab-status.sh: Likewise.
* tests/tail-2/inotify-race.sh: `read` needs an argument.
* tests/tail-2/inotify-race2.sh: Likewise.
|
|
* cfg.mk: Various syntax-check adjustments so that it's
not assumed the $builddir is the base distribution directory.
* Makefile.am: Likewise for the 'dist' target.
|
|
* cfg.mk (sc_case_insensitive_file_names): A new syntax-check rule.
* tests/tail-2/descriptor-vs-rename.sh: Rename from
tests/tail-2/f-vs-rename.sh
* tests/local.mk: Reference the renamed test.
Reported by Jim Meyering.
|
|
* tests/tail-2/inotify-rotate-resources.sh: s/(is_local_dir)/\1_/
|
|
* tests/dd/sparse.sh: Sync files before checking allocations,
which may be done asynchronously on NFS and BTRFS at least.
Also mark this test as very expensive on remote file systems.
* tests/du/2g.sh: Likewise, also use fallocate if available
to efficiently allocate the large file, otherwise skip
on remote file systems.
* tests/tail-2/inotify-rotate-resources.sh: Use the more
standard is_local_dir_() to check remoteness.
* tests/cp/fiemap-empty.sh: Comment on the sync issue
for this currerntly unused test.
Fixes http://bugs.gnu.org/20570
|
|
* src/timeout.c (cleanup): Don't send SIGCONT to the monitored program
when --foreground is specified, as it's generally not needed for
foreground programs, and can cause intermittent signal delivery
issues with monitors like GDB for example.
* doc/coreutils.texi (timeout invocation): Mention that SIGCONT
is not sent with --foreground.
* NEWS: Mention the behavior change.
|
|
Supporting `split --numeric-suffixes=1 -n100` for example.
* doc/coreutils.texi (split invocation): Mention the two
use cases for the FROM parameter, and the consequences on
the suffix length determination.
* src/split.c (set_suffix_length): Use the --numeric-suffixes
FROM parameter in the suffix width calculation, when it's
less than the number of files specified in --number.
* tests/split/suffix-auto-length.sh: Add test cases.
Fixes http://bugs.gnu.org/20511
|
|
* src/wc.c (usage): State that it calculates display width.
* doc/coreutils.texi (wc invocation): Detail the distinct
items used to determine the display width.
|
|
Generally if logs are truncated, they're truncated to 0 length,
so output all existing data when our heuristic determines truncation.
Note with inotify, truncate() and write() are often determined
independently and so all data would be written if that was the case.
* src/tail.c (check_fspec): Reset file offset to 0 upon truncation.
(tail_forever): Likewise.
(recheck): Add a FIXME for the related issue where tail may lose
data due to tail discounting older log files too early.
* tests/tail-2/truncate.sh: A new test.
* tests/local.mk: Reference the new test.
* NEWS: Mention the fix.
|
|
The previous fixes to races in the various tail tests,
identified actual races in the tail inotify implementation.
With --follow=descriptor, if the tailed file was replaced before
the inotify watch was added, then any subsequent changes were ignored.
Similarly in --follow=name mode, all changes to a new name were
effectively ignored if that name was created after the original open()
but before the inotify_add_watch().
* src/tail.c (tail_forever_inotify): Fix 3 cases.
1. With -f, don't stop tailing when file removed before watch.
2. With -f, watch right file when file replaced before watch.
3. With -F, inspect correct file when replaced before watch.
Existing tests identify these when tail compiled with TAIL_TEST_SLEEP.
* tests/tail-2/inotify-rotate-resources.sh:
This test also identifies the issue with --follow=name
when TAIL_TEST_SLEEP is used. Adjust so the test is immune
to such races, and also fail quicker on remote file systems.
* tests/tail-2/inotify-race2.sh: A new test using GDB,
based on inotify-race.sh, which tests the -F race
without needed recompilation with sleeps.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug.
|
|
Reap background processes so that:
- Stray processes aren't left on the system
- Files aren't held open causing deletion issues on NFS
- Partitions used to run the tests from can be unmounted
* tests/tail-2/F-vs-missing.sh: Add the `kill && wait` of the
background $pid(s) to cleanup_().
* tests/tail-2/F-vs-rename.sh: Likewise.
* tests/tail-2/f-vs-rename.sh: Likewise.
* tests/tail-2/append-only.sh: Likewise.
* tests/tail-2/assert-2.sh: Likewise.
* tests/tail-2/assert.sh: Likewise.
* tests/tail-2/flush-initial.sh: Likewise.
* tests/tail-2/inotify-hash-abuse.sh: Likewise.
* tests/tail-2/inotify-hash-abuse2.sh: Likewise.
* tests/tail-2/inotify-race.sh: Likewise.
* tests/tail-2/inotify-rotate-resources.sh: Likewise.
* tests/tail-2/inotify-rotate.sh: Likewise.
* tests/tail-2/pid.sh: Likewise.
* tests/tail-2/pipe-f2.sh: Likewise.
* tests/tail-2/retry.sh: Likewise.
* tests/tail-2/symlink.sh: Likewise.
* tests/tail-2/tail-n0f.sh: Likewise.
* tests/tail-2/wait.sh: Likewise.
* tests/cp/existing-perm-race.sh: Likewise.
* tests/cp/file-perm-race.sh: Likewise.
* tests/cp/parent-perm-race.sh: Likewise.
* tests/cp/sparse-to-pipe.sh: Likewise.
* tests/dd/stats.sh: Likewise.
* tests/du/move-dir-while-traversing.sh: Likewise.
* tests/misc/cat-buf.sh: Likewise.
* tests/misc/help-version.sh: Likewise.
* tests/misc/printf-surprise.sh: Likewise.
* tests/misc/sort-compress-proc.sh: Likewise.
* tests/misc/sort-spinlock-abuse.sh: Likewise.
* tests/misc/stdbuf.sh: Likewise.
* tests/misc/tac-continue.sh: Likewise.
* tests/misc/timeout-group.sh: Likewise.
* tests/mv/i-3.sh: Likewise.
* tests/rm/dangling-symlink.sh: Likewise.
* tests/rm/isatty.sh: Likewise.
* cfg.mk (sc_prohibit_test_background_without_cleanup_):
A new syntax-check to ensure cleanup_() is defined
when background tasks are created in a test.
|
|
* tests/tail-2/inotify-race.sh: Add a `wait` to ensure that
we reap all background gdb and tail processes. That resulted
in the test hanging intermittently and upon investigation was
due to gdb intermittently failing to terminate the child process
due to receiving a SIGCONT signal. Therefore we avoid using
timeout(1) which sends that signal, and instead rely on tail's
inbuilt --pid monitoring on a background sleep process.
Given this new implementation, the VERY_EXPENSIVE guard was removed.
Related issues with this test hanging were previously discussed at:
https://lists.gnu.org/archive/html/bug-coreutils/2009-12/msg00025.html
|
|
* tests/tail-2/F-vs-missing.sh: Use standard "fastpoll" options
(-s.1 --max-unchanged-stats=1) to speedup the non-inotify case.
Add the non-inotify case to the test. `wait` on the background
tail process to terminate which should avoid the need for the
non standard `retry_delay_ cleanup ...` on NFS.
* tests/tail-2/F-vs-rename.sh: Remove 'out' at the start of the loop,
to avoid a race in checking its contents. Also ensure 'a' & 'b'
files are present before the tail process starts. Use the standard
"fastpoll" options as above.
* tests/tail-2/f-vs-rename.sh: Likewise.
* tests/tail-2/append-only.sh: Use more standard variable names.
* tests/tail-2/flush-initial.sh: Use "fastpoll" options for
non-inotify platforms. Also `wait` on the background tail to avoid
stray processes and file cleanup issues on NFS.
* tests/tail-2/inotify-hash-abuse.sh: Always run non-inotify case.
Use "fastpoll" options. Use a more standard retry_delay_ instead
of a hardcoded sleep loop. Add a `wait` on the background tail.
* tests/tail-2/inotify-hash-abuse2.sh: Likewise.
* tests/tail-2/inotify-rotate-resources.sh: Wait just on the
specific tail $pid needed.
* tests/tail-2/inotify-rotate.sh: Use "fastpoll" options.
* tests/tail-2/pid.sh: Use standard variable names.
Add a `wait` on the background tails.
* tests/tail-2/pipe-f2.sh: Likewise.
* tests/tail-2/tail-n0f.sh: Likewise.
* tests/tail-2/retry.sh: Use "fastpoll" options.
* tests/tail-2/symlink.sh: Likewise.
* tests/tail-2/wait.sh: Likewise. Speedup by using sub second
parameters to timeout(1). Improve the part ensuring that
-F never follows a renamed file.
* tests/tail-2/infloop-1.sh: Remove invalid test. tail(1) was not
being passed the --pid=$yes_pid option, retry_delay_ wasn't used
to avoid races, and yes could write huge files before being killed.
* tests/local.mk: Remove the invalid test reference.
* tests/tail-2/assert-2.sh: Rewrite using retry_delay_(). Since
no longer hardcoding large delays, remove the VERY_EXPENSIVE tag.
* tests/tail-2/assert.sh: Likewise.
|
|
* src/system.h (is_ENOTSUP): Avoid in-function #if directive.
|
|
Without this change, very recent gcc (e.g., version 6.0.0 20150509)
would print the following when configured with --enable-gcc-warnings:
src/copy.c:165:30: error: logical 'or' of equal expressions \
[-Werror=logical-op]
&& (errno == EOPNOTSUPP || errno == ENOTSUP || errno == ENOSYS))
^
* src/system.h (is_ENOTSUP): New function.
* src/copy.c (punch_hole): Use it.
* src/ls.c (errno_unsupported, gobble_file): Use it.
|
|
* src/system.h (emit_stdin_note): A new function, refactoring
the usage note about the '-' FILE implying stdin.
* src/base64.c (usage): Use the new function to emit the
note in a standard location and with standard separation.
* src/cat.c (usage): Likewise.
* src/csplit.c (usage): Likewise.
* src/cut.c (usage): Likewise.
* src/expand.c (usage): Likewise.
* src/fmt.c (usage): Likewise.
* src/head.c (usage): Likewise.
* src/md5sum.c (usage): Likewise.
* src/nl.c (usage): Likewise.
* src/od.c (usage): Likewise.
* src/paste.c (usage): Likewise.
* src/pr.c (usage): Likewise.
* src/ptx.c (usage): Likewise.
* src/shred.c (usage): Likewise.
* src/shuf.c (usage): Likewise.
* src/sort.c (usage): Likewise.
* src/sum.c (usage): Likewise.
* src/tac.c (usage): Likewise.
* src/tail.c (usage): Likewise.
* src/tsort.c (usage): Likewise.
* src/unexpand.c (usage): Likewise.
* src/wc.c (usage): Likewise.
* src/join.c (usage): Adjust the separation used for
the message referring to FILE1 or FILE2 as stdin.
* src/comm.c (usage): Add a message using the same
wording (translation) as used in join.
* src/split.c (usage): Reword to using FILE rather than
INPUT, allowing use of emit_stdin_note(). Also remove
the mention of "fixed-size" pieces as this isn't now
always the case.
Fixes http://pad.lv/1450179
|
|
* tests/df/no-mtab-status.sh: getmntent is no longer called
when /proc/self/mountinfo is present, thus causing the test
to be skipped. Therefore wrap fopen() to ignore mountinfo,
and use the test genmntent table instead.
* tests/df/skip-duplicates.sh: Likewise.
|
|
* src/coreutils.c (usage): include coreutils.h outside
the printf call, because if it's a macro you will get the error:
embedding a #include directive within macro arguments is not supported
|
|
* src/yes.c (main): Simplify the logic so that the
compiler can see this function always returns a value.
This was seen with GCC 5.0 in SINGLE_BINARY mode.
|
|
* tests/ls/no-cap.sh: Ensure the test isn't skipped even if
capability coloring is disabled in the current $LS_COLORS.
Also just enable/disable capability coloring to avoid the
dircolors(1) overhead.
|
|
The equivalent styling added in v8.23-155-g3b98ee7,
is now applied to gnulib using projects by default.
|
|
gnulib now only checks that the printf routines never crash,
which is all coreutils currrently requires, and so we revert
commit v8.23-81-gf57bfbb to let gnulib decide whether to replace
the system printf routines.
|
|
With GCC 5 and the newly added warnings from gnulib, ensure the
correct signed integer is passed for the printf format,
to avoid -Werror=format= failures.
|
|
Fix file-has-acl build failure on RHEL/Centos 6.
Fix GCC 5 warnings with printf and in fts.c.
|
|
* bootstrap.conf: 0.19.2 is available on openSUSE-13.2,
Debian-8.0, and Ubuntu-14.10. Given there were issues
with earlier 0.19 gettext releases, set this as the new minimum.
* configure.ac (AM_GNU_GETTEXT_VERSION): Likewise.
Reported by Bernhard Voelker
|
|
* src/local.mk (src_ls_LDADD): Change from LIB_ACL to LIB_HAS_ACL.
|
|
* bootstrap.conf (gnulib_modules): Add file-has-acl.
(buildreq): Bump autopoint and gettext to 0.19.4.
* configure.ac (AM_GNU_GETTEXT_VERSION):
Bump to 0.19.4.
* gl/lib/tempname.c.diff, gl/lib/tempname.h.diff:
Merge recent gnulib changes.
|
|
* doc/coreutils.texi (truncate invocation): The word 'their' is
incorrect; 'each file' is the antecedent, and is singular,
so 'its' is the correct pronoun.
|
|
* src/longlong.h: Sync with the latest longlong.h from libgmp to:
- Use __builtin_c[lt]zl on arm64.
- Fix sparc64 vis3 build failure due to missing __clz_tab.
- Avoid a clang build issue on mips.
- Support thumb2 arm 32 bit system.
* src/cfg.mk (sc_ensure_comma_after_id_est): Exclude longlong.h
to ease merges.
|
|
All warnings were of the form: "assuming signed overflow does not occur
when simplifying conditional to constant [-Werror=strict-overflow]"
* src/dd.c (cache_round): Use an appropriately sized unsigned type,
to avoid possibility of undefined signed overflow.
* src/mknod.c (main): Likewise.
* src/pr.c (pad_down): Likewise.
* src/wc.c (main): Likewise.
* src/tail.c (main): Assert that argc >= 0 thus allowing the
compiler to assume without implication that argc - optind
is positive.
|
|
* src/dircolors.hin: Add the MISSING entry, to indicate
this as a possibility in new templates output from dircolors,
and also to ease comparison with existing databases that
generally do define a MISSING entry.
|
|
* doc/coreutils.texi (cp invocation): Mention that when copying files
without preserving permissions, the umask or a default ACL affect
the mode of new files.
* THANKS.in: Remove committer.
Related to http://bugs.gnu.org/8527
|
|
* src/df.c (filter_mount_list): With -l, avoid stating remote mounts.
* init.cfg: Avoid test hangs with inaccessible remote mounts.
* tests/df/no-mtab-status.sh: Skip with inaccessible remote mounts.
* tests/df/skip-rootfs.sh: Likewise.
* tests/df/total-verify.sh: Likewise.
* NEWS: Mention the bug fix.
Reported at http://bugzilla.redhat.com/1199679
|
|
* doc/coreutils.texi: `mkfifo' and `mknod' use the optContext macro
which adds a description for the SELinux security context in addition to
the single option already described in each case. The result in both
cases is two options being introduced as `option' (singular). Fix this
by introducing them as `options' (plural).
|
|
Conditional jump or move depends on uninitialised value(s)
at 0x40380C: get_field_values (df.c:840)
by 0x403E16: get_dev (df.c:994)
by 0x404D65: get_all_entries (df.c:1364)
by 0x405926: main (df.c:1714)
* src/df.c (get_dev): Initialize the fsu.fsu_bavail_top_bit_set
member, when adding placeholder entries.
(main): Avoid a "definitely lost" memory leak warning from valgrind,
reported by Bernhard Voelker.
|
|
* src/ls.c (usage): Add punctuation to avoid ambiguity in the
description of the --time option. Mention that both the -u
and --sort=time default order is newest first.
|
|
* src/tail.c (tail_forever_inotify): Only monitor write()s and
truncate()s to files in --follow=descriptor mode, thus avoiding
the bug where we removed the watch on renamed files.
Also adjust the inotify event processing code that is
now significant only in --follow=name mode.
* tests/tail-2/F-vs-rename.sh: Improve this existing test by running
in both polling and inotify modes.
* tests/tail-2/f-vs-rename.sh: A new test based on the existing one.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug.
Fixes http://bugs.gnu.org/19760
|
|
* doc/coreutils.texi: Move numfmt info to this section,
as numfmt functionality aligns more with seq and factor,
than fmt and pr etc.
|
|
Problem reported by Isaac Schwabacher in:
http://bugs.gnu.org/20214
* doc/coreutils.texi (nohup invocation): Clarify that when nohup's
stdin gets redirected, it's unreadable.
* doc/coreutils.texi (nohup invocation):
* src/nohup.c (usage): Don't promise /dev/null.
|
|
* tests/fs/skip-duplicates.sh: On this platform .mnt_opts is significant
so define to empty to avoid a NULL deref in read_file_system_list().
Fixes http://bugs.gnu.org/20210
|
|
* src/ls.c (usage): Avoid the implication that the
default ls behavior is to --color=always.
Reported in http://bugs.debian.org/781208
|
