summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-09-16* tests/rm/v-slash: Avoid test failure with non-C locale.Jim Meyering
Reported by Michael Stone.
2007-09-15Enable some previously omitted test scripts. Add a test cross-check.Jim Meyering
* tests/rm/Makefile.am (TESTS): Add empty-name and unreadable. * tests/rm/empty-name: Likewise. * tests/rm/unreadable: Reenable this test. Adjust for new rm. * tests/mkdir/Makefile.am: Add writable-under-readonly. * tests/mkdir/writable-under-readonly: Add some comments. This test is always skipped, for now. * tests/Makefile.am (ta): Hook up the new root-only script. * tests/tail-2/infloop-1: Make this test pass. * tests/tail-2/Makefile.am (TESTS): Add infloop-1. * tests/tail-2/fflush: Remove unused file. * tests/check.mk (vc_executable_is_in_TESTS): More portable. * tests/check.mk (check): Depend on the above. * build-aux/check.mk: Remove comment mentioning AUTHORS file.
2007-09-15Factor out definitions in TESTS_ENVIRONMENT of srcdir, top_srcdir, etc.Jim Meyering
tests/check.mk (top_srcdir): Define. tests/*/Makefile.am: Remove definitions of $(srcdir), $(top_srcdir), $(abs_top_srcdir), and $(abs_top_builddir), since they're defined via the included tests/check.mk.
2007-09-15tests/general: Remove from VC, this long-unused directory and contents.Jim Meyering
2007-09-15Adapt tests/tail-2/ to use test-lib.sh.Jim Meyering
2007-09-15Adapt tests/readlink/ to use test-lib.sh.Jim Meyering
2007-09-15Move the sole test in tests/ls-2/ to tests/misc/.Jim Meyering
* tests/ls-2/basic-1: Move this file to ... * tests/misc/ls-misc: ...here. Don't rely on $PROG in env. * tests/misc/Makefile.am (TESTS): Add ls-misc. * tests/Makefile.am (SUBDIRS): Remove ls-2. * tests/ls-2: Remove the directory. * configure.ac (AC_CONFIG_FILES): Remove tests/ls-2/Makefile.
2007-09-15More misc, test-related changes. (some to allow running tests as root)Jim Meyering
2007-09-15Move all tests from test/{od,sha1sum,shred,stty} to tests/misc/.Jim Meyering
Reflect these renamings: od/od-N misc/od-N od/x8 misc/od-x8 sha1sum/basic-1 misc/sha1sum sha1sum/sample-vec misc/sha1sum-vec shred/exact misc/shred-exact shred/remove misc/shred-remove stty/basic-1 misc/stty stty/invalid misc/stty-invalid stty/row-col-1 misc/stty-row-col * tests/misc/Makefile.am (TESTS): Add the new files. * tests/Makefile.am (SUBDIRS): Remove the dir names. * tests/od, tests/sha1sum, tests/shred, tests/stty: Remove the directories. * configure.ac (AC_CONFIG_FILES): Remove the corresponding Makefile names.
2007-09-15Move the two tests in tests/tee to tests/misc/.Jim Meyering
* tests/tee/basic: Move this file to ... * tests/misc/tee: ...here. Don't rely on $PROG in env. * tests/tee/dash: Move this file to ... * tests/misc/tee-dash: ...here. Don't rely on $PROG in env. * tests/misc/Makefile.am (TESTS): Add tee. * tests/Makefile.am (SUBDIRS): Remove tee. * tests/tee: Remove the directory. * configure.ac (AC_CONFIG_FILES): Remove tests/tee/Makefile
2007-09-15Move the two tests in tests/sum/ to tests/misc/.Jim Meyering
* tests/sum/basic-1: Move this file to ... * tests/misc/sum: ...here. Don't rely on $PROG in env. * tests/sum/sysv: Move this file to ... * tests/misc/sum-sysv: ...here. Adapt it to use test-lib.sh. * tests/misc/Makefile.am (TESTS): Add sum and sum-sysv. * tests/Makefile.am (SUBDIRS): Remove sum. * tests/sum: Remove the directory. * configure.ac (AC_CONFIG_FILES): Remove tests/sum/Makefile.
2007-09-15Move the sole test in tests/tsort/ to tests/misc/tsort.Jim Meyering
* tests/tsort/basic-1: Move this file to ... * tests/misc/tsort: ...here. Don't rely on $PROG in env. * tests/misc/Makefile.am (TESTS): Add tsort. * tests/Makefile.am (SUBDIRS): Remove tsort. * tests/tsort: Remove the directory. * configure.ac (AC_CONFIG_FILES): Remove tests/tsort/Makefile.
2007-09-15Move the sole test in tests/unexpand to tests/misc/unexpand.Jim Meyering
* tests/unexpand/basic-1: Move this file to ... * tests/misc/unexpand: ...here. Don't rely on $PROG in env. * tests/misc/Makefile.am (TESTS): Add unexpand. * tests/Makefile.am (SUBDIRS): Remove unexpand. * tests/unexpand: Remove the directory. * configure.ac (AC_CONFIG_FILES): Remove tests/unexpand/Makefile.
2007-09-15Move the sole test in tests/seq to tests/misc/seq.Jim Meyering
* tests/seq/basic: Move this file to ... * tests/misc/seq: ...here. Don't rely on $PROG in env. * tests/misc/Makefile.am (TESTS): Add seq. * tests/Makefile.am (SUBDIRS): Remove seq. * tests/seq: Remove the directory. * configure.ac (AC_CONFIG_FILES): Remove tests/seq/Makefile
2007-09-15Convert tests/mkdir/ to use test-lib.sh.Jim Meyering
2007-09-15Move the two tests in tests/md5sum to tests/misc/md5sum.Jim Meyering
* tests/md5sum/basic-1: Move this file to ... * tests/misc/md5sum: ...here. Don't rely on $PROG in env. * tests/md5sum/newline-1: Move this file to ... * tests/misc/md5sum-newline: ...here. Don't rely on $PROG in env. * tests/misc/Makefile.am (TESTS): Add md5sum. * tests/Makefile.am (SUBDIRS): Remove md5sum. * tests/md5sum: Remove the directory. * configure.ac (AC_CONFIG_FILES): Remove tests/md5sum/Makefile
2007-09-15tests/sample-test: Update to use test-lib.sh.Jim Meyering
2007-09-15Convert tests/misc/ to use test-lib.sh, too.Jim Meyering
2007-09-15Convert tests/ls/, too.Jim Meyering
2007-09-15Convert tests/ln/, too.Jim Meyering
2007-09-15Convert tests/install/, too.Jim Meyering
2007-09-15Move the two tests in tests/fmt to tests/misc/fmt.Jim Meyering
* tests/fmt/basic: Move this file to ... * tests/misc/fmt: ...here. Don't rely on $PROG in env. * tests/fmt/long-line: Move this file to ... * tests/misc/fmt-long-line: ...here. * tests/misc/Makefile.am (TESTS): Add fmt. * tests/Makefile.am (SUBDIRS): Remove fmt. * tests/fmt: Remove the directory. * configure.ac (AC_CONFIG_FILES): Remove tests/fmt/Makefile
2007-09-15Move the sole test in tests/factor to tests/misc/factor.Jim Meyering
* tests/factor/basic: Move this file to ... * tests/misc/factor: ...here. Don't rely on $PROG in env. * tests/misc/Makefile.am (TESTS): Add factor. * tests/Makefile.am (SUBDIRS): Remove factor. * tests/factor: Remove the directory. * configure.ac (AC_CONFIG_FILES): Remove tests/factor/Makefile
2007-09-15Move the sole test in tests/expr to tests/misc/expr.Jim Meyering
* tests/expr/basic: Move this file to ... * tests/misc/expr: ...here. Don't rely on $PROG in env. * tests/misc/Makefile.am (TESTS): Add expr. * tests/Makefile.am (SUBDIRS): Remove expr. * tests/expr: Remove the directory. * configure.ac (AC_CONFIG_FILES): Remove tests/expr/Makefile
2007-09-15Convert tests/du/*, too.Jim Meyering
2007-09-15Move the sole test in tests/dircolors to tests/misc/dircolors.Jim Meyering
* tests/dircolors/simple: Move this file to... * tests/misc/dircolors: ...here. Don't rely on $PROG in env. * tests/misc/Makefile.am (TESTS): Add dircolors. * tests/Makefile.am (SUBDIRS): Remove dircolors. * tests/dircolors: Remove the directory. * configure.ac (AC_CONFIG_FILES): Remove tests/dircolors/Makefile
2007-09-15Convert tests/dd/*, too.Jim Meyering
2007-09-15Convert tests/mv, too.Jim Meyering
* tests/other-fs-tmpdir: Before, all callers would exit 77 upon failure to find the required dir. Now, exit 77 in this script so callers don't have to. Adjust callers.
2007-09-15Adjust chgrp, chmod, chown, cp tests to use test-lib.sh.Jim Meyering
* tests/check.mk: Also define abs_top_builddir.
2007-09-15Parallel "make check" support.Jim Meyering
* build-aux/check.mk: New file, from The Vaucanson Group. * .x-sc_GPL_version: New file, to allow "version 2 or later" in build-aux/check.mk. * Makefile.am (EXTRA_DIST): Add .x-sc_GPL_version. * tests/check.mk: New file. * tests/Makefile.am (EXTRA_DIST): Add check.mk, mkdtemp and test-lib.sh. Begin factoring "sample-test" out of test scripts. * tests/test-lib.sh: New file, to be sourced by all tests that were previously derived from the "sample-test" template. * tests/mkdtemp: New file. * tests/touch/dir-1: Use test-lib.sh. * tests/touch/empty-file: Likewise. * tests/touch/fail-diag: Likewise. * tests/touch/fifo: Likewise. * tests/touch/no-create-missing: Likewise. * tests/touch/no-rights: Likewise. Also, don't sleep. * tests/touch/not-owner: Likewise. * tests/touch/obsolescent: Likewise. * tests/touch/read-only: Likewise. * tests/touch/relative: Likewise. * tests/touch/Makefile.am: Include $(top_srcdir)/tests/check.mk, to get the parallel-"make check" bits. Move a slow test into tests/misc. * tests/check.mk: Wrapper. * tests/ls/time-1: Move this file to tests/misc/ls-time. * tests/misc/ls-time: New file. From tests/ls/time-1. * tests/ls/Makefile.am (TESTS): Remove time-1. * tests/misc/Makefile.am (TESTS): Add ls-time.
2007-09-15Add support for parallel "make check" (in tests/misc, for now)Jim Meyering
2007-09-15* vc-list-files: Remove mercurial support.Jim Meyering
Check for CVS first. Adjust comments.
2007-09-08Accommodate gnulib's renaming: __fpending.h -> fpending.h.Jim Meyering
* lib/t-fpending.c: Include "fpending.h", not "__fpending.h".
2007-09-07chmod: don't ignore a dangling symlinkJim Meyering
* NEWS: Mention the bug fix. * src/chmod.c (process_file): Handle the case of FTS_SLNONE, i.e., give a diagnostic saying we cannot operate on such a file. * tests/chmod/thru-dangling: Compare new stderr output with expected.
2007-09-07Add a test: demonstrate that chmod ignores a dangling symlinkBob Proulx
* tests/chmod/thru-dangling: New test. Fails. * tests/chmod/Makefile.am (TESTS): Add thru-dangling.
2007-09-05Adapt to new SELinux behavior: "?" vs. new "unlabeled"Jim Meyering
* src/ls.c (gobble_file): Interpret the new "unlabeled" indicator from getfilecon/lgetfilecon the same way we interpret a negative return value: no security context. So we don't print the "+". * tests/selinux: Recognize that "unlabeled" means insufficient support for SELinux, just like "?".
2007-09-03Run autoconf manually, if needed to get an updated version string.Jim Meyering
* GNUmakefile: Don't actually touch configure.ac. That would make git-version-gen always print "...-dirty".
2007-09-03Don't change '-'s to '.'s in the string from git-describe.Jim Meyering
* build-aux/git-version-gen: Leave '-'s in the string from git-describe. Otherwise, s/-/./g would make it too hard to distinguish the base version number from the appended .DD suffixes. 2007-09-03 Jim Meyering <jim@meyering.net>
2007-09-03README-hacking: Require rsync, rather than wget.Jim Meyering
2007-09-02* bootstrap (WGET_COMMAND): Remove code to set this variable.Jim Meyering
2007-09-02Ensure that $(VERSION) is up to date for dist-related targets.Jim Meyering
* GNUmakefile: Arrange to rerun autoconf, if the version reported by git-version-gen doesn't match $(VERSION), but only for dist targets. Signed-off-by: Jim Meyering <jim@meyering.net>
2007-09-02bootstrap: uses rsync to download the .po filesJim Meyering
* bootstrap (po_download_command_format): New global. (download_po_files): Use rsync. (update_po_files): Don't remove .po files after download, so future rsync runs can take advantage of the copies.
2007-09-01* bootstrap (gnulib_tool): Make sha1sum check quietly.Jim Meyering
Signed-off-by: Jim Meyering <jim@meyering.net>
2007-09-01Ensure that snapshot version changes make it to groups, too.Jim Meyering
* src/Makefile.am (groups): Depend on Makefile.
2007-09-01Make groups-version executable,Jim Meyering
* tests/misc/groups-version: ... as it was in the patch.
2007-08-31Test yesterday's change to groups.Eric Blake
* tests/misc/groups-version: New test. * tests/misc/Makefile.am (TESTS): Add groups-version.
2007-08-31Solve the unnecessary-.po-file-regeneration problem once and for all.Jim Meyering
* bootstrap (download_po_files): New function, renamed from get_translations. Now, downloads, but doesn't update LINGUAS. (update_po_files): New function.
2007-08-30Shorten the snapshot version string by removing the "g".Jim Meyering
* build-aux/git-version-gen: Remove git-describe's "g" that would always precede the abbreviated SHA1. Suggestion from Dmitry V. Levin.
2007-08-30Perform the s,rm,/bin/rm, fix-up properly. No more kludge.Jim Meyering
* Makefile.am (EXTRA_DIST): Remove .kludge-stamp. (.kludge-stamp): Remove rule. Instead, ... (dist-hook): Do the job here, operating on the file in $(distdir). (rm_subst): Adjust regexp to match "rm -f rm$(EXEEXT)", not "rm -f rm". (MAINTAINERCLEANFILES): s/+=/=/, now that this is the sole use. (dist-hook): Remove the legacy-from-cvs install-sh is-executable check. * .gitignore: Remove .kludge-stamp. Signed-off-by: Jim Meyering <jim@meyering.net>
2007-08-30Make inter-release --version output more useful.Jim Meyering
Now, each snapshot has a version "number" like 6.9-219-g58ddd, which indicates that it is built using the 219th change set (in _some_ repository) following the "v6.9" tag, and that 58ddd is a prefix of the commit SHA1. * build-aux/git-version-gen: New file. * configure.ac: Run it to set the version. * Makefile.am (dist-hook): Arrange so that .version appears only in distribution tarballs, never in a checked-out repository. * .gitignore: Add .version here, too. Just in case. Signed-off-by: Jim Meyering <jim@meyering.net>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-26 19:38:04 +0000