| Age | Commit message (Collapse) | Author |
|---|
|
* README-release: Fix typo. it's "maintainer-clean".
Refer to HACKING for full list of dependencies.
Use cvs add's -ko option to inhibit $Id$-style keyword expansion.
* maint.mk (web-manual): Factor out definition of $(manual_title).
(vc-dist): Set XZ_OPT=-9ev for the final "make dist".
* cfg.mk (manual_title): Define it here.
Suggestions from Eric Blake.
|
|
* README-release: New file.
|
|
* maint.mk (web-manual): New rule, from m4's maint.mk.
* bootstrap.conf (gnulib_modules): Add gendocs.
|
|
* tests/rm/ext3-perf: If set-up takes too long, use the set-up time
as the removal time limit. Otherwise, a parallel "make check" would
usually fail when run with RUN_VERY_EXPENSIVE_TESTS=yes.
|
|
* tests/setgid-check: The change in ls (use ".", not "+") caused
this check always to report the working directory as set-gid.
Now, use stat, not ls.
|
|
* tests/mkdir/perm: Now that this test is no longer always skipped,
make it work independently of ls: use stat, not ls, to get perm string.
* test-lib.sh (rwx_to_mode_): Use stat, not ls to get perm string
This test was run only when RUN_VERY_EXPENSIVE_TESTS=yes was set.
|
|
* tests/test-lib.sh: Redirect also to descriptor 9.
Better one-line why-skip diagnostics.
* tests/check.mk (TESTS_ENVIRONMENT): Redirect 9 to stderr.
* tests/misc/pwd-unreadable-parent: Remove redundant "skipping..." diag.
|
|
* bootstrap.conf (gnulib_modules): Add manywarnings.
* configure.ac: Use gl_MANYWARN_ALL_GCC, and exclude options
I don't want or that provoke too many warnings.
(WARN_CFLAGS, WERROR_CFLAGS): Define.
(lint, GNULIB_PORTCHECK): Define.
(_FORTIFY_SOURCE): Define to 2.
|
|
* src/prog-fprintf.h (prog_fprintf): Declare with printf attribute.
* src/system.h (usage): Declare with the "noreturn" attribute.
|
|
* src/dd.c (quit): Remove "inline" attribute.
* src/test.c (advance, unary_advance): Likewise.
|
|
* src/cp.c (INITIAL_HASH_MODULE, INITIAL_ENTRY_TAB_SIZE): Remove.
|
|
* maint.mk (announcement): Use announce-gen's new --no-print-checksums.
|
|
* maint.mk (sc_prohibit_signal_without_use): New rule.
|
|
* src/operand2sig.c: Don't include <signal.h>.
|
|
* tests/misc/sort: On Fedora 8 at least, sort -k1b,1
mishandles blanks in multibyte locales, so add test.
|
|
|
|
Running "mkdir dir; cp -rl dir dir" would create dir/dir/dir/...
rather than diagnosing the "copy-into-self" failure.
The easy fix would have been to revert this part of the change
[3ece0355 2008-11-09 cp: use far less memory in some cases]
that introduced the bug:
- remember_copied (dst_name, dst_sb.st_ino, dst_sb.st_dev);
+ if (!x->hard_link)
+ remember_copied (dst_name, dst_sb.st_ino, dst_sb.st_dev);
However, that would have induced the failure of the new cp/link-heap
test, due to the added memory pressure of recording 10k dev/ino pairs.
And besides, I liked that improvement and wanted to keep it.
Now that it's obvious recording the just-created-directory dev/ino
needn't depend on the setting of hard_link, I realized it is necessary
to record the pair only for the first directory created for each
source command-line argument.
I made that change, then noticed the new test, cp -rl a d d, would pass
when run once, yet output the into-self diagnostic twice. Also note
the side effect: it creates d/a and d/d. However, running that same
command a second time, now with the modified directory, would fail.
That turned out to be due to the fact that although the first into-self
failure was detected in copy_dir, that function would continue copying
other entries regardless -- and that would make it fail (eventually)
with the unwanted recursion.
* src/copy.c (copy_internal): This function needed an indicator of
whether, for a give command line argument, it had already created its
first directory. If so, no more need to record dev/ino pairs. If this
is the first, then do record its pair. Hence, the new parameter.
(copy_dir, copy): Update callers.
(copy_dir): Upon any into-self failure, break out of the loop.
* tests/cp/into-self: Test for the above.
Reported by Mikael Magnusson.
|
|
* tests/misc/stty-row-col: Don't hang when run in background
at least on Solaris 10 and OpenBSD.
|
|
* src/sort.c: When no specific number of chars to skip
is specified for the end field, always skip the whole field.
Also never include leading spaces from next field.
* tests/misc/sort: Add 2 new tests for these cases.
* NEWS: Mention this bug fix.
* THANKS: Add bug reporter.
Reported by Davide Canova.
|
|
* gl/lib/argv-iter.h (_ATTRIBUTE_NONNULL_): Don't assume C99 variadic
macros are portable yet; needed for at least IRIX/MIPSpro.
* THANKS: Update.
Reported by Stuart Shelton.
|
|
* tests/dd/skip-seek-past-file: Just check for
the non system specific part of the error strings.
This was causing an erroneous failure on NetBSD 1.6 at least.
|
|
* tests/ls/color-clear-to-eol: Use \33, not \e for ascii ESC.
This test failed when using the built-in printf of /bin/sh from
NetBSD 1.6.
|
|
Issue reported by Göran Uddeborg.
* src/system.h: Move the translator comment adjacent
to the translated string.
* THANKS: Update Göran's email address.
|
|
* man/truncate.x: Fix spelling.
* THANKS: Update.
|
|
* doc/coreutils.texi (dd invocation): Describe status=noxref.
|
|
Revert "tests: skip newly-modified tests unconditionally..."
This reverts commit 773a88d33f68e50a2919c8a8310c646a7e5fabc2.
* tests/misc/stty: Don't skip.
* tests/misc/stty-invalid: Likewise.
* tests/mv/i-3: Likewise.
|
|
* THANKS: Update James Youngman's email address
|
|
* NEWS: Add header line for next release.
* .prev-version: Record previous version.
* cfg.mk (old_NEWS_hash): Auto-update.
|
|
* NEWS: Record release date.
|
|
|
|
* tests/install/install-C: Use setgid-check.
|
|
* tests/misc/stty-invalid: Skip.
* tests/misc/stty: Likewise.
* tests/mv/i-3: Likewise.
|
|
Running "make check &" would hang due to SIGTTOU and SIGTTIN signals.
* tests/misc/stty: Ignore SIGTTOU.
* tests/misc/stty-invalid: Likewise.
* tests/mv/i-3: Ignore SIGTTIN.
|
|
* src/ls.c (usage): Make the description of -s mention "allocated size",
so that it's less likely to be confused with an apparent byte-count.
Suggested by Vito Caputo.
|
|
* src/dd.c (usage): Document the default block size.
* doc/coreutils.texi (dd invocation): Document that the default
block size (bs, ibs, obs) is 512 bytes.
Reported by Petr Uzel.
|
|
* maint.mk (NEWS_hash): Don't let the Copyright date line contribute
to the checksum.
* cfg.mk (old_NEWS_hash): Update to reflect the new policy.
|
|
* HACKING: A beginner's commit-to-master is so common,
and causes enough confusion, that we describe how to recover.
|
|
* HACKING: Add copyright notice.
* tests/test-lib.sh: Likewise.
|
|
* copy.c (copy_reg): Reduce SELinux context diagnostics for 'cp -a'.
(copy_internal): Likewise
* copy.h (cp_options): Add boolean reduce_diagnostics.
* cp.c (usage): Say that --archive (-a) behaves like -dR --preserve=all.
(cp_option_init): Initialize added reduce_diagnostics.
(main): Add reduce_diagnostics for the -a option, and preserve SELinux
context, if possible.
* mv.c (cp_options_init): Initialize new cp_options booleans.
* install.c (cp_option_init): Likewise.
* NEWS: Mention those behaviour changes.
* doc/coreutils.texi: Document --preserve=context, document that
diagnostics are not shown for failures of non-mandatory attributes
(just SELinux at the moment).
* tests/cp/cp-a-selinux: Check not only failures, but succesful use
of preserving SELinux context in cp.
|
|
* NEWS: Add 2009 to copyright.
* README: Likewise.
* README-hacking: Likewise.
* TODO: Likewise.
* doc/Makefile.am: Likewise.
* m4/prereq.m4: Likewise.
* src/nl.c: Likewise.
* src/seq.c: Likewise.
* tests/cp/cp-i: Likewise.
* tests/install/install-C: Likewise.
* tests/install/install-C-root: Likewise.
* tests/install/install-C-selinux: Likewise.
* tests/misc/seq: Likewise.
* tests/mv/mv-n: Likewise.
|
|
* src/install.c (need_copy): Use O_BINARY when it matters.
|
|
* src/install.c (have_same_content): New function to compare files
content.
(extra_mode): New function checking for non-permission bits in mode.
(need_copy): New function to check if copy is necessary.
(main): Handle new option --compare (-C).
(copy_file): Skip file copying if not necessary.
(usage): Show new option --compare (-C) in --help.
* tests/install/install-C: Basic tests for install --compare (-C).
* tests/install/install-C-root: Tests requiring root privileges.
* tests/install/install-C-selinux: Tests requiring SELinux.
* tests/Makefile.am: Add new tests for install --compare (-C).
* doc/coreutils.texi: Document new install option --compare (-C).
* NEWS: Mention the change.
|
|
* nl.c (usage): Use --starting-line-number, not --first-page for -v
|
|
* src/id.c (usage): Improve description, based on a suggestion
from Brian M. Carlson in http://bugs.debian.org/514675
* man/id.x: Use a better one-liner, based on the one at top of id.c.
|
|
Issue reported by Samuel Hapák.
<http://lists.gnu.org/archive/html/bug-coreutils/2009-02/msg00139.html>
* src/seq.c: Account for '.' added to "last" number.
* tests/misc/seq: Add corresponding test.
* NEWS: Mention the fix.
|
|
* src/du.c (main): Use FTS_DEFER_STAT, for better locality of inode
reference. Important when traversing file systems with fake inodes.
* src/chgrp.c (main): Likewise.
* src/chmod.c (main): Likewise.
* src/chown.c (main): Likewise.
The only remaining fts client, chcon, doesn't need this, since it goes
further and uses FTS_NOSTAT, which suppresses all non- directory
stat calls.
|
|
* HACKING: Give an example of how to run a test in isolation.
* README: Fix/simplify example for running a single test.
* README-hacking: Reference the HACKING file.
|
|
* src/ln.c (usage): Mention more about symlink properties.
* doc/coreutils.texi (ln invocation): Likewise.
* THANKS: Update.
Reported by Vitali Lovich.
Signed-off-by: Eric Blake <ebb9@byu.net>
|
|
This change addresses a relatively unusual case: ls --color, with
a highlighted name being printed initially in the last row of a
terminal emulator (possibly followed by other lines of output) such
that it is wrapped onto the following line, as the terminal emulator
scrolls the output. That would cause the entire following line to
be highlighted, even if the name happened to use only one position.
The least-invasive patch would have made colorized output larger for
all uses. The approach taken below is more invasive, but limits the
increase in overhead to only those lines that are expected to wrap.
* src/ls.c (enum indicator_no): Add C_CLR_TO_EOL.
(indicator_name): Add "cl".
(color_indicator): Add default escape codes for "cl".
(print_long_format): Propagate width to print_name_with_quoting.
(print_name_with_quoting): Print new C_CLR_TO_EOL string if needed.
Return the width of what we're printing.
(print_file_name_and_frills): Propagate width.
(print_type_indicator): Return bool (aka width).
(print_many_per_line): Pass column position to print_* function.
(print_current_files): Likewise.
(print_horizontal): Likewise.
(print_with_commas): Likewise.
* src/dircolors.c (slack_codes): Add "CLRTOEOL".
(ls_codes): Add "cl".
* tests/ls/color-clear-to-eol: New file. Test for this fix.
* tests/Makefile.am (TESTS): Add ls/color-clear-to-eol.
* THANKS: Update.
Reported by Alexander V. Lukyanov. See thread for details:
http://thread.gmane.org/gmane.linux.kernel/740021/focus=14824
Thanks to Jan Engelhardt for helping me reproduce the problem.
Demonstrate with this in an 80-column xterm:
seq 200 # to start in the "bottom" row
touch zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz.foo
env LS_COLORS='*.foo=0;31;42' ls -og --color=always
Before the fix, you'd see something like this:
(where the file name is printed in red on a green background,
and each "=" denotes a space on a green background)
...
-rw-r--r-- 1 0 Feb 5 11:31 zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz\
zzzzzzzzzzzzzz.foo===================================================
After the patch, the trailing green spaces are gone:
-rw-r--r-- 1 0 Feb 5 11:31 zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz\
zzzzzzzzzzzzzz.foo
|
|
|
