| Age | Commit message (Collapse) | Author |
|---|
|
* src/pr.c: Replace the code to truncate the most significant
digits of line numbers, with much simpler string manipulation
that supports arbitrary widths. Before this, specifying a
width >= 32 to -n would result in a divide by zero error.
Also remove the inconsistent padding with zeros and spaces, which
would result in zero padding for widths 12 and 15.
* tests/pr/pr-tests.pl: Added a test to ensure no zero padding,
and also a test for the divide by zero case.
* NEWS: Mentioned the fix
Reported by Ondrej Oprala
|
|
* src/local.mk (src_factor_LDADD): Append $(LIBICONV).
* crg.mk (sc_check-I18N-AUTHORS): A new syntax check rule
to ensure we add LIBICONV where appropriate.
* THANKS.in: Add the reporter.
Reported by Christian Jullien
Syntax check suggested by Jim Meyering
|
|
* tests/misc/pr.pl: Refactor this test into ...
* tests/pr/pr-tests.pl: ... here.
* tests/local.mk: Remove the reference to the removed test
Improved by Jim Meyering
|
|
When _FORTIFY_SOURCE is defined by the compiler or via flags, as
it is on Gentoo, do not override it. Otherwise we get many
redefinition warnings.
* configure.ac (FORTIFY_SOURCE): Check if _FORTIFY_SOURCE is defined.
This addresses http://bugs.gnu.org/12714
|
|
* NEWS: Add header line for next release.
* .prev-version: Record previous version.
* cfg.mk (old_NEWS_hash): Auto-update.
|
|
* NEWS: Record release date.
|
|
* src/factor.c (is_square): Use active voice in comment, not passive.
(factor): Add function-describing comment.
(mp_factor): Likewise.
|
|
src/factor.c (__GMP_DECLSPEC): Move back from longlong.h
to treat consistently with other stub macros.
(__GMP_GNUC_PREREQ): Reference to avoid -Wunused-macros warning.
(__GMP_DECLSPEC): Likewise.
(ASSERT): Likewise.
(__clz_tab): Likewise.
(factor_using_division): Mark a variable as unused.
(mulredc): Likewise.
(mulredc2): Likewise.
(divexact_21): Likewise.
|
|
* src/factor.c (factor_using_pollard_rho2): On some systems
(like sparc) we need to promote all addmod2() parameters
to uintmax_t to avoid warnings.
|
|
* src/longlong.h: Restrict some sparc assembly variants
to sparc V9. This was seen to be an issue with newer
sparc systems with default gcc CPU options.
|
|
* tests/misc/factor.pl: Correct the precedence and
regular expression in the command to check for GMP.
|
|
* NEWS (Bug fixes): Note that the copy-induced corruption but affects
mv (sometimes) and install, too. Pointed out by Bernhard Voelker.
|
|
* doc/coreutils.texi (cp invocation): Remove Cheshire Cat.
|
|
|
|
* src/extent-scan.c (extent_scan_read): Reset our last_ei
pointer whenever the parent buffer might have just been freed.
* tests/cp/fiemap-extent-FMR.sh: New test.
* tests/local.mk (all_tests): Add it.
* NEWS (Bug fixes): Mention it.
Reported by Mike Gerth in http://bugs.gnu.org/12656, and with
help from Alan Curry. Bug introduced in commit v8.10-60-g18f5a85.
|
|
* HACKING: Add "cd coreutils" after the git clone command.
Copyright-paperwork-exempt: Yes
|
|
In the recent factor rewrite, the GMP code
wasn't actually used; just an error was printed
on integer overflow. While fixing that it was noticed
that correct input validation wasn't done in all cases
when falling back to the GMP code.
* src/factor.c (print_factors) Fallback to GMP on overflow.
(strto2uintmax): Scan the string for invalid characters,
so that case can be detected independently of overflow.
Return an error when an empty string is passed.
Also allow leading spaces and '+' in input numbers.
* tests/misc/factor.pl: Ensure the GMP code is exercised
when compiled in. Also add a test to verify leading
spaces and '+' are allowed.
|
|
The new factor code introduced usage of mpz_inits() and
mpz_clears(), which are only available since GMP >= 5,
and will result in a compile error when missing.
* m4/gmp.m4 (cu_GMP): Define HAVE_DECL_MPZ_INITS appropriately.
* src/factor (mpz_inits): New function, defined where missing.
(mpz_clears): Likewise.
|
|
On some systems, -Wunused-macros would warn about two macros:
src/factor.c:148:0: warning: macro "__clz_tab" is not used
src/factor.c:126:0: warning: macro "UHWtype" is not used
* src/factor.c: Add a use to placate gcc.
|
|
When building the new make-prime-list program on a system for which
strerror is defined to rpl_strerror, we'd get a link failure.
The problem is that we're including <config.h> for some definitions,
but do not want the rpl_ ones, since this particular program must
not be linked against gnulib (aka libcoreutils.a). This did not
arise on Fedora 17 or 18, but did on Debian wheezy/sid.
* src/make-prime-list.c (strerror): #undef.
Build failure introduced by commit v8.19-152-gcf67e4c.
|
|
* src/factor.c (print_factors_single): Use fputs and umaxtostr
rather than printf with "%ju". This reduced the time required
to compute and print the factors of the first 10^7 integers from
over 8 seconds to 5.75s. Run this command:
seq $((10**7)) | env time factor > /dev/null
|
|
* src/factor.c: Renamed from factor-ng.c, with the following changes:
Adjust copyright header to be consistent with others.
Use xmalloc and xrealloc, to avoid segv upon OOM.
Switch back to using readtokens to handle input.
Diagnose invalid inputs.
s/fprintf+exit/error/
(print_factors): Add comments.
(strto2uintmax): Return strtol_error, not int.
(read_item): Remove, no longer used.
(main): Use atexit(close_stdout) so that we don't ignore failed write.
* cfg.mk: Exempt src/longlong.h from several tests.
Exempt run.sh from the test-list-consistency test.
Exempt make-prime-list.c from numerous tests, since we won't
be making it conform: it must not link with libcoreutils.a.
Exempt factor-ng.c from the no-upper-case error message test.
* AUTHORS (factor): Add Torbjörn and Niels.
* tests/local.mk (factor_tests): Encode the 37 tests.
($(factor_tests)): Rule to generate a test script for each test.
* tests/factor/run.sh: New script, marked as very expensive.
* .gitignore: Ignore new generated files.
* src/local.mk (src/primes.h): New rule.
(noinst_PROGRAMS): Add make-prime-list.
(noinst_HEADERS): Add longlong.h.
Remove all wheel-related rules and files.
* src/wheel-gen.pl: Remove file.
maint: mark set-but-not-used variables with ATTRIBUTE_UNUSED
* src/factor-ng.c (redcify, prime_p, isqrt2): Mark them, so we
don't have to disable -Wunused-but-set-variable.
maint: use __builtin_expect only if __GNUC__
* src/factor-ng.c (LIKELY, UNLIKELY) [__GNUC__]: Add #ifdef guard.
build: avoid warning about unused macro
* src/factor-ng.c (__GMP_DECLSPEC): Don't define here
* src/longlong.h (__GMP_DECLSPEC): Define if not already defined.
|
|
* src/factor-ng.c: Import some improvements from
http://gmplib.org:8000/factoring
Co-authored-by: Torbjörn Granlund <tg@gmplib.org>
|
|
* src/factor-ng.c: New file, from nt-factor.
* src/longlong.h: New file.
* NEWS (Improvements): Mention the upcoming improvements.
Co-authored-by: Niels Möller
|
|
* src/make-prime-list.c: Insert spaces before parens.
(main): Abort if the 8-delta value ever exceeds 255.
|
|
Even though this is just a helper program that is run solely to create
primes.h, it should not ignore a write failure. Normally we would
simply call atexit (close_stdout), but we cannot do that from this
helper program, since it must be built before the generated header,
primes.h. If we were to make the linking of make-prime-list depend
on libcoreutils.a, that would add all lib/*.o files to the list
of dependents of $(BUILT_HEADERS). Then, since there is currently no
provision to ensure that a file like lib/stdio.h (another built header)
is built before the first lib/*.o file that also includes <stdio.h>,
some lib/*.o files would be built before lib/stdio.h and some after.
The former would provoke link failures due to undefined rpl_* functions.
* src/make-prime-list.c: Include <errno.h>.
(fclose): Undef, so that a definition to rpl_fclose does not
cause a link failure.
(main): Per the above, in this exceptional case, we check for fclose
and ferror failure manually, and don't worry about the ferror-only
failure case in which errno may not be relevant.
|
|
* src/make-prime-list.c: Include <config.h>.
(binvert): Add _GL_ATTRIBUTE_CONST.
|
|
* src/make-prime-list.c: New file, from nt-factor.
Co-authored-by: Niels Möller <nisse@lysator.liu.se>
|
|
* src/local.mk: Remove the above dependency.
A soon-to-be-added new program, make-prime-list, must not depend
on that, since it is used to create a BUILT_SOURCES file.
That dependency is already handled via the ..._LD_ADD variables,
and so that redundant dependency has so far been harmless.
|
|
On some systems (notably, BSD-based, like at least OpenBSD 4.9),
the me_type member does not come from the heap.
* src/du.c (fill_mount_table): Free the ->me_type member only
when it was malloc'd, i.e., when ->me_type_malloced is nonzero.
Bug introduced via commit v8.19-2-gcf7e1b5.
Reported as http://bugs.gnu.org/12542.
|
|
* doc/coreutils.texi (nice invocation): s/nicenesses/niceness values/
|
|
* src/nice.c (usage): s/Nicenesses/Niceness values/
|
|
* src/nice.c (usage): Specify the entity (process) that
that relative terms are referring to.
* THANKS: Update.
Reported-by: David Diggles
|
|
The --no-preserve=mode option did not do what its name implies:
it would mistakenly preserve permission mode bits.
* NEWS: Mention the fix.
* TODO: Remove an entry.
* src/copy.c (copy_reg): Add a condition to properly
handle the --no-preserve=mode option for files
(copy_internal): Add a condition to properly handle the
--no-preserve=mode option for directories.
* src/copy.h (struct cp_options): Add a new boolean.
* src/cp.c (cp_option_init,decode_preserve_arg): Set the
new boolean value according to specified options.
* src/install.c (struct cp_options): Initialize the new boolean.
* src/mv.c (struct cp_options): Initialize the new boolean.
* tests/cp/preserve-mode.sh: Add a new test.
* tests/cp/link-preserve.sh (-a --no-preserve=mode): Adjust the
expected perms: now, --no-preserve=mode overrides the --preserve=mode
that is inherent in -a, as it should.
* tests/local.mk: Add the new test to the list.
|
|
This was originally attempted in commit v8.12-117-g5a647a0,
but reverted before release because of the unreliability
of disabling core dumps using setrlimit() on Linux kernels.
This new version instead uses prctl() where available to
more reliably disable core dumps for the timeout process.
* m4/jm-macros.m4: Define HAVE_SETRLIMIT and HAVE_PRCTL.
* src/timeout.c (disable_core_dumps): A new function
that disables coredumps using prctl or setrlimit if available.
(main): If the child exited with a signal and we can
disable core dumps, then raise that signal to the timeout
process itself, so that callers may also see the signal status.
Also print a message indicating when the monitored command
dumped core, as that information is lost in the signal
propagation through timeout.
|
|
* src/dd.c (STATUS_NONE): A new bitmask combining all STATUS_
options, thus used to suppress all informational output.
(struct symbol_value statuses): Expose the "none" option,
corresponding to the STATUS_NONE bitmask above.
(print_stats): Return early if STATUS_NONE is specified.
Also move the call to gethrxtime() down so that it's only
called when needed.
(usage): Describe the new options.
* doc/coreutils.texi (dd invocation): Likewise.
* NEWS: Mention the new feature.
* tests/dd/misc.sh: Ensure the new option works.
|
|
Teach tail -f that it must use polling on vmhgfs file systems, and
let stat -f --format=%T report the file system type name, "vmhgfs".
* src/stat.c (human_fstype): Add a case: vmhgfs, 0xbacbacbc, remote.
* NEWS (Improvements): Mention it.
* THANKS.in: Update.
Reported by Daniel Tschinder in http://bugs.gnu.org/12461.
|
|
I've moved the non-recursive-gnulib-prefix-hack module to
gnulib, with two small improvements, so remove it from here
and update gnulib to the latest.
* gl/build-aux/prefix-gnulib-mk: Remove file.
* gl/m4/non-recursive-gnulib-prefix-hack.m4: Remove file.
* gl/modules/non-recursive-gnulib-prefix-hack: Remove file.
* gnulib: Update to latest.
|
|
* src/remove.c (excise): The change in commit v8.19-107-gccbd3f3 made
the "rm -rf D" (for unreadable dir, D) diagnostic worse on Solaris 10:
-rm: cannot remove 'D': Permission denied
+rm: cannot remove 'D': File exists
That happened because unlinkat would fail with EEXIST there, given
an unreadable directory, which made the two tests, tests/rm/unread2
and tests/rm/unreadable fail. Accommodate the EEXIST case, too.
|
|
* cfg.mk: Fix comment typo: s/recursive/non-recursive/ make
|
|
* tests/cp/link-heap.sh: Increase virtual memory limit by 2000KiB --
from 20,000 to 22,000 KiB -- to avoid a new failure on rawhide.
|
|
* cfg.mk: Configure a few variable to make the tight-scope rule work.
* gnulib: Update submodule to latest.
|
|
The renaming from BLOCKS to N was done in v8.15-38-g140eca1,
and documentation for N was added again in v8.17-26-g4f2e9d5
without noticing that. Now, finally remove the word BLOCKS
from the documentation.
* src/dd.c (usage): Remove the word BLOCKS.
* doc/coreutils.texi (dd invocation): Likewise.
Improved by: Bernhard Voelker <mail@bernhard-voelker.de>
|
|
* NEWS (Build-related): Mention the non-recursive make improvement.
Improved by: Pádraig Brady
|
|
When listing a directory containing dangling symlinks,
and not outputting a long format listing, and orphaned links
are set to no coloring in LS_COLORS, then the symlinks
would get no color rather than reverting to the standard
symlink color. The issue was introduced in v8.13-19-g84457c4
* src/ls.c (print_color_indicator): Use the standard method
to check if coloring is specified for orphaned symlinks.
The existing method would consider 'or=00' or 'or=0' as significant
in LS_COLORS. Even 'or=' was significant as in that case the
string='or=' and the length=0. Also apply the same change
for missing symlinks for consistency.
(gobble_file): Remove the simulation of linkok, which is only
tested in print_color_indicator() which now handles this directly
by keying on the LS_COLORS values correctly.
* tests/misc/ls-misc.pl: Add a test case.
* THANKS: Add the reporter.
* NEWS: Mention the fix.
Reported-by: David Matei
|
|
* doc/coreutils.texi (seq invocation): Update an example and mention
that with the new constraints, seq can print arbitrarily large numbers.
|
|
* src/seq.c (main): Adjust the initial arbitrary precision
seq_fast enablement checks to be more maintainable, and
a little more general, by allowing single character
separators to use seq_fast.
Also check again after the number arguments are processed,
to see if we can still use seq_fast, which while not
allowing arbitarly large integers, it will handle
integers of the form 10E10 etc.
(seq_fast): Use a specified separator character,
rather than hardcoding '\n'.
|
|
* tests/local.mk (TESTS_ENVIRONMENT): Rename from AM_TESTS_ENVIRONMENT,
since it is not honored in automake-1.11.3 after all.
This reverts commit v8.19-38-g34c9c8f. For now, I'll leave
the following commit that made bootstrap.conf require 1.11.2.
Prompted by a report of test failure from Pádraig Brady.
|
|
* gl/build-aux/prefix-gnulib-mk (prefix_assignment): Exempt
the RHS of a "GPERF = ..." assignment from lib/ prefixing.
|
|
Handle non-negative whole numbers robustly and efficiently when
the increment is 1 and when no format-changing option is specified.
On the correctness front, for very large numbers, seq now works fine:
$ b=1000000000000000000000000000
$ src/seq ${b}09 ${b}11
100000000000000000000000000009
100000000000000000000000000010
100000000000000000000000000011
while the old one would infloop, printing garbage:
$ seq ${b}09 ${b}11 | head -2
99999999999999999997315645440
99999999999999999997315645440
The new code is much more efficient, too:
Old vs new: 55.81s vs 0.82s
$ env time --f=%e seq $((10**8)) > /dev/null
55.81
$ env time --f=%e src/seq $((10**8)) > /dev/null
0.82
* seq.c (incr): New function, inspired by the one in cat.c.
(cmp, seq_fast): New functions, inspired by code in nt-factor
by Torbjörn Granlund and Niels Möller.
(trim_leading_zeros): New function, without which cmp would malfunction.
(all_digits_p): New function.
(main): Hoist the format_str-vs-equal_width check to precede first
treatment of operands, and insert code to call seq_fast when possible.
* NEWS (Bug fixes): Mention the correctness fix.
(Improvements): Mention the speed-up.
* tests/misc/seq.pl: Exercise the new code.
Improved by: Bernhard Voelker.
http://thread.gmane.org/gmane.comp.gnu.coreutils.general/3340
|
