| Age | Commit message (Collapse) | Author |
|---|
|
* src/extent-scan.c (extent_scan_read): Add a more stringent check
for OFF_T overflow, to ensure subsequent code is immune.
Detect overlapping extents and adjust, so as files always copied.
Detection using a single scan with fallback to a standard copy
was thought too expensive in memory or time.
* NEWS: Mention the fix
|
|
This bug was introduced in commit ca9e212c, 2009-09-24,
"cp, mv: use linkat to guarantee semantics", which
inadvertently disabled the creation of hardlinks to symlinks.
However rather than implementing the intention of that commit
and relying on gnulib linkat emulation, we'll revert to the
previous emulation as that maintains ownership and timestamps.
* src/copy.c (copy_internal): Use our existing hardlink to
symlink emulation when link() might dereference the symlink.
Also ensure that we copy the timestamps of the original symlink
when we use the emulation.
* tests/cp/link-symlink: Add a test to ensure timestamps copied.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the fix.
Reported by Ruediger Meier
|
|
* tests/tail-2/inotify-rotate: Wait 50% longer for grep to succeed.
Without this change, this test would fail consistently when using
"make -j25 check" with F15 in a virtio- and spinning-rust-backed
virtual machine.
|
|
* src/extent-scan.h (struct extent_scan): Add the fm_flags member to
pass to the fiemap scan.
* src/extent-scan.c (extent_need_sync): A new function used to
detect Linux kernels before 2.6.38.
(extent_scan_init): Add FIEMAP_FLAG_SYNC when needed.
* tests/cp/sparse-fiemap: Adjust comment.
* NEWS: Mention the change in behavior.
Indirectly suggested by Mike Frysinger
|
|
* tests/init.cfg (require_selinux_): Skip the test also when
/proc/filesystems does not list selinuxfs.
Add comments.
* cfg.mk (exclude_file_name_regexp--sc_file_system): Exempt
tests/init.cfg, with its use of /proc/filesystems.
Based on the patch by Mathieu Bridon in http://debbugs.gnu.org/8359.
More discussion in http://bugzilla.redhat.com/573111
|
|
* src/find-mount-point.h: Move "*" to where it belongs.
Move "const", too.
* src/find-mount-point.c: Move "const" to conform.
* src/Makefile.am (sc_tight_scope): Allow `*'s before the function name.
Use perl's -l option and drop the \n after (and quotes around) $1.
|
|
* src/df.c (alloc_table_row): A new function to allocate storage
for a row of strings.
(print_table): A new function to interate over all stored strings in
the table, and apply alignment honoring the max width of each column.
(get_header): Renamed from print_header, and adjusted accordingly.
(get_dev): Renamed from show_dev. Also we no longer wrap longer
device names over two lines, which can be an unexpected issue for
scripts parsing the output from df.
(get_disk): s/show_/get_/
(get_point): Likewise.
(get_entry): Likewise.
(get_all_entries): Likewise.
* NEWS: Mention the change.
|
|
|
|
* tests/misc/test: Exercise the new operator.
* NEWS (Changes in behavior): Mention it.
|
|
Make GNU coreutils' test recognize "==" as a synonym for "=".
This is already the case in GNU coreutils' expr, bash, ksh,
busybox ash, FreeBSD-current /bin/sh and /bin/test, and
OpenBSD's /bin/sh.
Before, env test a '==' a would fail with this diagnostic:
"test: ==: binary operator expected". Now, it succeeds.
* src/test.c: Accept "==" as a synonym for "=".
* doc/coreutils.texi (String tests): Document it.
Reported as http://debbugs.gnu.org/8263
Also see http://austingroupbugs.net/view.php?id=375
|
|
* tests/cp/preserve-gid: Ensure that every process under test uses
the cp binary we've just built. Before this fix, with a restrictive
umask or build-dir permissions, the UID-changing tests would end up
using whatever cp happened to be available through $PATH
Analysis by arbogast.cedric@gmail.com in http://debbugs.gnu.org/8292.
|
|
* bootstrap.conf (excluded_files): Don't exclude m4/lcmessage.m4,
as it's needed with the latest gnulib.
|
|
The names in THANKS are generated from two sources: the hard-coded
list, THANKS.in, and the names of committers from the git log.
When a contributor on the hard-coded list commits a change,
we remove their now-redundant name from THANKS.in.
* THANKS.in: Remove a now-duplicate name.
|
|
* tests/filefrag-extent-compare: Merge adjacent extents in
each list before processing, so we correctly account for
split extents in either list.
* tests/cp/sparse-fiemap: Remove the explicit syncing,
which was only changing the way extents were arranged,
and thus working around the extent comparison issue
that was seen on ext4 loop back.
|
|
* src/sort.c (INPUT_FILE_SIZE_GUESS): Decrease initial allocation
factor used to size buffer used when reading a non-regular file.
For motivation, see discussion here:
http://thread.gmane.org/gmane.comp.gnu.coreutils.general/878/focus=887
|
|
Instead, use the brand new mechanism with which you merely use a
variable (derived from the rule name) defined in cfg.mk to an ERE
matching the exempted file names.
* gnulib: Update to latest, to get maint.mk that implements this.
* Makefile.am (syntax_check_exceptions): Remove variable.
(EXTRA_DIST): Remove use of the variable.
* cfg.mk (sc_x_sc_dist_check): Remove rule, no longer useful.
(exclude_file_name_regexp--sc_space_tab): Define variable.
(exclude_file_name_regexp--sc_bindtextdomain): Likewise.
(exclude_file_name_regexp--sc_unmarked_diagnostics): Likewise.
(exclude_file_name_regexp--sc_error_message_uppercase): Likewise.
(exclude_file_name_regexp--sc_trailing_blank): Likewise.
(exclude_file_name_regexp--sc_system_h_headers): Likewise.
(exclude_file_name_regexp--sc_require_config_h_first): Likewise.
(exclude_file_name_regexp--sc_require_config_h): Likewise.
(exclude_file_name_regexp--sc_po_check): Likewise.
(exclude_file_name_regexp--sc_prohibit_always-defined_macros): Likewise.
(exclude_file_name_regexp--sc_prohibit_empty_lines_at_EOF): Likewise.
(exclude_file_name_regexp--sc_program_name): Likewise.
(exclude_file_name_regexp--sc_file_system): Likewise.
(exclude_file_name_regexp--sc_prohibit_always_true_header_tests):
Likewise.
(exclude_file_name_regexp--sc_prohibit_fail_0): Likewise.
(exclude_file_name_regexp--sc_prohibit_atoi_atof): Likewise.
(exclude_file_name_regexp--sc_prohibit_tab_based_indentation): Likewise.
(exclude_file_name_regexp--sc_prohibit_stat_st_blocks): Likewise.
* configure.ac [whether localtime caches TZ]: Use return 0/1, not
exit (0/1) to avoid triggering a sc_prohibit_magic_number_exit failure.
* .x-sc_GPL_version: Remove file.
* .x-sc_bindtextdomain: Likewise.
* .x-sc_error_message_uppercase: Likewise.
* .x-sc_file_system: Likewise.
* .x-sc_obsolete_symbols: Likewise.
* .x-sc_po_check: Likewise.
* .x-sc_program_name: Likewise.
* .x-sc_prohibit_always-defined_macros: Likewise.
* .x-sc_prohibit_always_true_header_tests: Likewise.
* .x-sc_prohibit_atoi_atof: Likewise.
* .x-sc_prohibit_empty_lines_at_EOF: Likewise.
* .x-sc_prohibit_fail_0: Likewise.
* .x-sc_prohibit_magic_number_exit: Likewise.
* .x-sc_prohibit_stat_st_blocks: Likewise.
* .x-sc_prohibit_strcmp: Likewise.
* .x-sc_prohibit_tab_based_indentation: Likewise.
* .x-sc_require_config_h: Likewise.
* .x-sc_require_config_h_first: Likewise.
* .x-sc_space_tab (config): Likewise.
* .x-sc_sun_os_names: Likewise.
* .x-sc_system_h_headers: Likewise.
* .x-sc_trailing_blank: Likewise.
* .x-sc_unmarked_diagnostics: Likewise.
* .x-sc_useless_cpp_parens: Likewise.
|
|
* gl/lib/mbsalign.c (rpl_wcswidth): Remove this in favor
of the equivalent wcswidth replacement in gnulib.
* bootstrap.conf: Depend on the wcswidth module.
Suggested by Bruno Haible.
|
|
* gnulib: Update to latest, to address http://debbugs.gnu.org/8230.
When built on Solaris 9 and run on Solaris 10, touch would segfault.
Reported by Ben Walton.
* bootstrap: Update from gnulib.
* tests/init.sh: Likewise.
* NEWS (Bug fixes): Mention this.
|
|
* src/sort.c (SUBTHREAD_LINES_HEURISTIC): Do not spawn a new thread
for every 4 lines. Increase this from 4 to 128K. 128K lines seems
appropriate for a 5-year-old dual-core laptop, but it is too low for
some common combinations of short lines and/or newer systems.
* NEWS (Bug fixes): Mention it.
|
|
* src/extent-scan.c (extent_scan_read): Merge adjacent extents
that vary only in size, so that we may process them more efficiently.
This will be especially useful when we introduce fallocate()
so that we don't reproduce fragmentation in the destination.
|
|
* src/dd.c (warn_partial_read): New static var.
(iread): Diagnose partial reads if needed.
(iwrite): Don't diagnose them here; not needed any more.
(scanargs): Determine whether partial reads should be diagnosted.
|
|
* tests/dd/nocache: Don't assume stdin is a pipe
|
|
* src/dd.c (FFS_MASK): A new macro (Find First Set) refactored
from the following enum as it's now used twice.
(usage): Mention the new 'nocache' flag.
(cache_round): A new function to help ignore requests
to drop cache, that are less than page_size.
(invalidate_cache): A new function to call posix_fadvise()
with the appropriate offset and length. Note we don't
use fdadvise() so we can detect errors when count=0.
(dd_copy): Call invalidate_cache() for the portions read.
(iwrite): Likewise for the portions written.
(main): Call invalidate_cache for page_size slop or
for full file when count=0.
* cfg.mk (sc_dd_O_FLAGS): Adjust to pass.
* doc/coreutils.texi (dd invocation): Describe the 'nocache' flag,
and give some examples of how it can be used.
* tests/dd/nocache: A new test.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the new feature.
|
|
* doc/coreutils.texi (dd invocation): Clarify that bs= can
cause parital reads to be immediately written to output.
* src/dd.c (usage): Hint that bs= can cause partial writes.
See http://debbugs.gnu.org/cgi/bugreport.cgi?bug=8171
|
|
* src/dd.c (usage): Move 'sync' up with other data transformation
options. Having it alongside 'fsync' and 'fdatasync' is
particularly confusing. Also the double line description of
the 'sync' option, serves as a visual break from the "flag"
type options that follow.
* doc/coreutils.texi (dd invocation): Apply the same grouping
as above, by splitting the "conv=" table in two.
|
|
An alternative to this is to auto enable iflag=fullblock
when oflag=direct and bs= is specified.
It was thought better though, to warn about the specific issue,
and give full control of dd's options to the user.
* src/dd.c (iwrite): Warn, when we write after having
disabled O_DIRECT.
See https://bugzilla.redhat.com/show_bug.cgi?id=614605
|
|
* src/du.c (main): Fail on AI_ERR_READ error, rather than merely
diagnosing and continuing. Based on a patch by Stefan Vargyas.
Also move the handling of AI_ERR_EOF into the case stmt.
Do not report ferror/fclose(stdin) failure when we've
already diagnosed e.g., failure to read the DIR, above.
Bug introduced by 2008-11-24 commit 031e2fb5, "du: read and
process --files0-from= input a name at a time,".
* src/wc.c: Handle read failure as with du: do not exit
immediately, but rather go on to print any total and to clean-up.
As above, move the handling of AI_ERR_EOF into the case stmt.
* tests/du/files0-from-dir: New file, to test both du and wc.
* tests/Makefile.am (TESTS): Add it.
* NEWS (Bug fixes): Mention it.
|
|
* src/wc.c (main): Diagnose failed argv_iter_init_* failure,
rather than falling through and dereferencing NULL.
Bug introduced by 2008-11-25 commit c2e56e0d,
"wc: read and process --files0-from= input a name at a time,".
* NEWS (Bug fixes): Mention it.
|
|
* tests/cp/sparse-fiemap: Move the PERL check to the top,
since we don't test anything without it. In the loop,
don't use skip_test_ as it exits the test completely.
|
|
* tests/Makefile.am: Replace spaces with tabs for consistency
|
|
There was an execution path by which "libstdbuf" could be used after
being freed, but that would happen only if there were no libstdbuf.so
alongside the stdbuf program and there had been an installation error
leading to absence of the file, PKGLIBDIR/libstdbuf.so.
* src/stdbuf.c (set_LD_PRELOAD): Rearrange loop to make it perfectly
clear that there is no possibility of use-after-free.
Steve Grubb reported this possible use-after-free of "libstdbuf".
|
|
* tests/cp/sparse-to-pipe: Wait for backgrounded "cat" to complete
before comparing the results.
|
|
* src/uptime.c (print_uptime): Omit unnecessary "#if defined
HAVE_GETLOADAVG || defined C_GETLOADAVG". This #if is always
true, and removing it will help us simplify the gnulib getloadavg
module.
|
|
* tests/cp/sparse-fiemap: Check for fiemap support against a file
rather than a directory to enable tests on BTRFS for example.
Explicity disable the test on ext3 or file systems where we
can't determine the type.
* tests/cp/fiemap-perf: Likewise. Also disable the test on older
BTRFS (like in Fedora 14), where extents are returned for holes.
* tests/init.cfg: Comment that BTRFS only supports fiemap
for regular files.
|
|
Don't depend on heuristics to detect sparse files
if fiemap is available. Also don't scan for new
holes unless --sparse=always has been specified.
* src/copy.c (extent_copy): Pass the user specified
sparse mode, and handle as described above.
|
|
* src/copy.c (extent_copy): Suppress redundant lseek()s in both
the source and dest files, when there is no hole between extents.
|
|
* tests/check.mk (.built-programs): Run cd'd submake in a subshell
so the redirected output ends up in the current directory, not ../src.
|
|
* tests/init.cfg (fiemap_capable_): Print with warn_, so that the
diagnostic shows up alongside the corresponding SKIP message.
|
|
Do not run a sub-make to set up the environment for each
and every test script. Instead, run it just once and store
the result in a file.
* tests/check.mk (built_programs): Remove definition.
(.built-programs): New rule to create the temporary file.
(CLEANFILES): Arrange to remove it.
(TESTS_ENVIRONMENT): Simply cat .built-programs, rather than
running the sub-make.
* .gitignore: Ignore it.
|
|
* tests/cp/fiemap-2: Enable the fiemap check for files, which
will enable the test for files on ext3.
* tests/cp/fiemap-perf: Comment why we're not enabling for ext3.
* tests/cp/sparse-fiemap: Ditto. Also sync the files before
doing a fiemap which was needed for ext4 loop back at least.
Add a comment that FIEMAP_FLAG_SYNC is ineffective, thus
requiring the explicit syncs.
* tests/fiemap-capable: A new python script to determine
if a specified path supports fiemap.
* tests/init.cfg (fiemap_capable_): Use the new python script.
* tests/Makefile.am (EXTRA_DIST): Include the new python script.
|
|
* gl/modules/randread-tests (Files): Add tests/macros.h
* gl/tests/test-rand-isaac.c: Remove now-unneeded #include directives.
(ASSERT): Remove definition.
Instead, include "macros.h".
Prompted by suggestions from Bruno Haible.
|
|
* gl/lib/di-set.c: Remove file.
* gl/lib/di-set.h: Likewise.
* gl/lib/ino-map.c: Likewise.
* gl/lib/ino-map.h: Likewise.
* gl/modules/di-set: Likewise.
* gl/modules/di-set-tests: Likewise.
* gl/modules/ino-map: Likewise.
* gl/modules/ino-map-tests: Likewise.
* gl/tests/test-di-set.c: Likewise.
* gl/tests/test-ino-map.c: Likewise.
* gnulib: Update to latest, now that these two modules are there.
|
|
This is required for patch, and hence is about to move to gnulib.
* gl/lib/di-set.c (di_set_lookup): New function.
* gl/lib/di-set.h: Declare it.
* gl/tests/test-di-set.c (main): Exercise it.
The bug was introduced on 2004-12-04 via commit 7380cf79.
|
|
* src/cut.c (set_fields): When computing the maximum range endpoint,
take into consideration the start of any unbounded range, like "999-".
* NEWS (Bug fixes): Mention it.
* tests/misc/cut (big-unbounded-b,c,f): Add tests.
Reported by Paul Marinescu in http://debbugs.gnu.org/7993
The bug was introduced on 2004-12-04 via commit 7380cf79.
|
|
Upon failed lseek, sparse_copy_finalize would mistakenly return true.
Admittedly, that is very unlikely, since that particular lseek
is attempted only if the preceding call to sparse_copy induced
a hole at EOF (via lseek on the destination FD). However, now
that sparse_copy has an output parameter, N_READ, there is no
longer any reason to call lseek (fd, 0, SEEK_CUR), so...
* src/copy.c (sparse_copy_finalize): Remove the function.
(copy_reg): Call ftruncate with n_read, rather than
sparse_copy_finalize with its now-unnecessary lseek.
Lasse Collin spotted the bug in sparse_copy_finalize.
|
|
* NEWS: Add header line for next release.
* .prev-version: Record previous version.
* cfg.mk (old_NEWS_hash): Auto-update.
|
|
* NEWS: Record release date.
|
|
* src/extent-scan.c (extent_scan_read) [!linux]: Always set
scan->initial_scan_failed so caller knows not to report the failure.
|
|
* tests/mv/i-3: Skip when uname -s reports FreeBSD.
|
|
This case was overlooked in commit bdde34f9, 2010-08-05,
"sort: tune and refactor --debug code, and fix minor underlining bug"
* src/sort.c (debug_key): Don't adjust the key end when
it's before the key start.
* tests/misc/sort-debug-keys: Add a test case.
|
