From 094ca96844842928810f14844413109fc6cdd890 Mon Sep 17 00:00:00 2001 From: Eduardo Chappa Date: Sun, 3 Feb 2013 00:59:38 -0700 Subject: Initial Alpine Version --- web/src/cgi.tcl-1.10/Makefile.in | 273 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 273 insertions(+) create mode 100644 web/src/cgi.tcl-1.10/Makefile.in (limited to 'web/src/cgi.tcl-1.10/Makefile.in') diff --git a/web/src/cgi.tcl-1.10/Makefile.in b/web/src/cgi.tcl-1.10/Makefile.in new file mode 100644 index 00000000..3f818f2c --- /dev/null +++ b/web/src/cgi.tcl-1.10/Makefile.in @@ -0,0 +1,273 @@ +# +# Makefile for Don Libes' cgi.tcl - routines for writing CGI scripts in Tcl +# + +VERSION = \"@CGI_VERSION_FULL@\" +SHORT_VERSION = @CGI_VERSION@ + +srcdir = @srcdir@ +VPATH = @srcdir@ +SUBDIRS = @subdirs@ + +###################################################################### +# The following lines are things you may want to change +###################################################################### + +# By default, "make install" will install the appropriate files in +# /usr/local/bin, /usr/local/lib, /usr/local/man, etc. By changing this +# variable, you can specify an installation prefix other than /usr/local. +# You may find it preferable to call configure with the --prefix option +# to control this information. This is especially handy if you are +# installing this several times (perhaps on a number of machines or +# in different places). Then you don't have to hand-edit this file. +# See the INSTALL file for more information. (Analogous information +# applies to the next variable as well.) +prefix = @prefix@ + +# You can specify a separate installation prefix for architecture-specific +# files such as binaries and libraries. +exec_prefix = @exec_prefix@ + +# Short directory path where binaries can be found to support #! hack. +# This directory path can be the same as the directory in which the binary +# actually sits except when the path is so long that the #! mechanism breaks +# (usually at 32 characters). +# The solution is to create a directory with a very short name, which consists +# only of symbolic links back to the true binaries. Subtracting two for "#!" +# and a couple more for arguments (typically " -f" or " --") gives you 27 +# characters. Pathnames over this length won't be able to use the #! magic. +# For more info on this, see the execve(2) man page. +SHORT_BINDIR = $(exec_prefix)/bin + +# Tcl interpreter for utility work. +CGI_TCL_EXECUTABLE = @CGI_TCL_EXECUTABLE@ + +# Where to put the examples - a directory in which your web server has +# permission to execute CGI scripts. +exampledir = /tmp/cgi-bin/cgi-tcl-examples + +###################################################################### +# End of things you may want to change +# +# Do not change anything after this +###################################################################### + +bindir_arch_indep = $(prefix)/bin +libdir = $(exec_prefix)/lib +datadir = $(prefix)/lib + +mandir = $(prefix)/man +man1dir = $(mandir)/man1 +man3dir = $(mandir)/man3 +docdir = $(datadir)/doc + +# utility script directories - arch-independent and arch-non- +# independent. +SCRIPTDIR = $(datadir)/cgi$(SHORT_VERSION) +EXECSCRIPTDIR = $(execdatadir)/cgi$(SHORT_VERSION) + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ + +# To install the following examples: make examples +EXAMPLES=cookie.cgi creditcard.cgi \ + display.cgi display-in-frame.cgi download.cgi \ + echo.cgi error.cgi evaljs.cgi example.tcl examples.cgi \ + form-tour.cgi form-tour-result.cgi format-tour.cgi frame.cgi \ + image.cgi img.cgi kill.cgi nistguest.cgi oratcl.cgi \ + parray.cgi passwd.tcl passwd-form.cgi passwd.cgi \ + push.cgi rm.cgi stopwatch.cgi \ + unimail.cgi upload.cgi uploadbin.cgi \ + validate.cgi vclock.cgi vclock.pl vclock-src-frame.cgi visitor.cgi \ + vote.cgi + +EXAMPLES_DATA=nistguest vote.cnt + +all: cgi.tcl pkgIndex.tcl + +info: +dvi: + +# Delete all the installed files that the `install' target creates +# (but not the noninstalled files such as `make all' creates) +uninstall: + -rm -f $(SCRIPTDIR)/cgi.tcl + -rm -f $(man3dir)/cgi.tcl.3 + -rm -f $(SCRIPTDIR)/pkgIndex.tcl + +.PHONY: install-info install info +install-info: + +install: all + ${srcdir}/mkinstalldirs $(man3dir) $(SCRIPTDIR) $(exampledir) $(exampledir)/data +# install scripts + $(INSTALL_DATA) cgi.tcl $(SCRIPTDIR) +# install library man page + $(INSTALL_DATA) cgi.tcl.man $(man3dir)/cgi.tcl.3 + $(INSTALL_DATA) pkgIndex.tcl $(SCRIPTDIR) + +examples: + for i in $(EXAMPLES) ; do \ + $(CGI_TCL_EXECUTABLE) $(srcdir)/fixline1 $(SHORT_BINDIR) < $(srcdir)/example/$$i > $$i ; \ + $(INSTALL_PROGRAM) $$i $(exampledir) ; \ + rm -f $$i ; \ + done + for i in $(EXAMPLES_DATA) ; do \ + $(INSTALL) -m 666 $(srcdir)/example/$$i $(exampledir)/data ; \ + done + +cgi.tcl: $(srcdir)/cgi.tcl.in + @echo "Rebuilding cgi.tcl..." + $(SHELL) ./config.status + +################################### +# Targets for Makefile and configure +################################### + +Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) config.status + @echo "Rebuilding the Makefile..." + $(SHELL) ./config.status + +# Let "make -f Makefile.in" produce a configure file +configure: $(srcdir)/configure.in $(srcdir)/Makefile.in + @echo "Rebuilding configure..." + if [ x"${srcdir}" = x"@srcdir@" ] ; then \ + srcdir=. ; export srcdir ; \ + else true ; fi ; \ + (cd $${srcdir}; autoconf) + +config.status: $(srcdir)/configure + @echo "Rebuilding config.status..." + $(SHELL) ./config.status --recheck + +check: + @if [ -f testsuite/Makefile ]; then \ + cd testsuite && $(MAKE) $(FLAGS_TO_PASS) check; \ + else true; fi + +# updating of pkgIndex.tcl has not yet been totally automated +# Instructions: +# 1) Replace version # in cgi.tcl with updated version. +# (Gad, I'd have to turn the whole source into .in file to automate this +# and it'd be a major nuisance when developing!) +pkgIndex.tcl: cgi.tcl + $(CGI_TCL_EXECUTABLE) pkgcreate + +################################################ +# Various "clean" targets follow GNU conventions +################################################ + +# delete all files from current directory that are created by "make" +clean: + -rm -f *~ *.o core + +# like "clean", but also delete files created by "configure" +distclean: clean + -rm -f Makefile config.status config.cache config.log + -rm -f Dbg_cf.h + +# like "clean", but doesn't delete test utilities or massaged scripts +# because most people don't have to worry about them +mostlyclean: + -rm -f *~ *.o core + +# delete everything from current directory that can be reconstructed +# except for configure +realclean: distclean + +###################################### +# Targets for pushing out releases +###################################### + +FTPDIR = /itl/www/div826/subject/expect/cgi.tcl + +# make a private tar file for myself +tar: cgi.tcl-$(SHORT_VERSION).tar + mv cgi.tcl-$(SHORT_VERSION).tar cgi.tcl.tar + +# Make a release and install it on ftp server +# Note that we run configure on our end to make sure that cgi.tcl is usable +# for people who don't have configure at the destination end (non-UNIX folks). +ftp: cgi.tcl cgi.tcl-$(SHORT_VERSION).tar.Z cgi.tcl-$(SHORT_VERSION).tar.gz install-html + cp cgi.tcl-$(SHORT_VERSION).tar.Z $(FTPDIR)/cgi.tcl.tar.Z + cp cgi.tcl-$(SHORT_VERSION).tar.gz $(FTPDIR)/cgi.tcl.tar.gz + cp HISTORY $(FTPDIR) + cp README $(FTPDIR)/README.distribution + cp doc/ref.txt $(FTPDIR) + cp doc/ref.html $(FTPDIR) + cp example/README $(FTPDIR)/example + cp `pubfile example` $(FTPDIR)/example + ls -l $(FTPDIR)/cgi.tcl.tar* +# delete temp files + rm cgi.tcl-$(SHORT_VERSION).tar* + +cgi.tcl-$(SHORT_VERSION).tar: configure + rm -f ../cgi.tcl-$(SHORT_VERSION) + ln -s `pwd` ../cgi.tcl-$(SHORT_VERSION) + cd ..;tar cvfh $@ `pubfile cgi.tcl-$(SHORT_VERSION)` + mv ../$@ . + +cgi.tcl-$(SHORT_VERSION).tar.Z: cgi.tcl-$(SHORT_VERSION).tar + compress -fc cgi.tcl-$(SHORT_VERSION).tar > $@ + +cgi.tcl-$(SHORT_VERSION).tar.gz: cgi.tcl-$(SHORT_VERSION).tar + gzip -fc cgi.tcl-$(SHORT_VERSION).tar > $@ + +########################### +# Targets for producing FAQ and homepage +########################### + +NISTCGI_PREFIX = /local +NISTCGI_HOST = ats.nist.gov +NISTCGI_INTERPDIR = $(NISTCGI_PREFIX)/bin +NISTCGI_LIBDIR = $(NISTCGI_PREFIX)/lib/cgi$(SHORT_VERSION) +NISTCGI_EXAMPLEDIR = $(NISTCGI_HOST):/private/home/http/cgi-bin/cgi.tcl +NISTCGI_HTMLDIR = /itl/www/div826/subject/expect/cgi.tcl + +# create the FAQ in html form +FAQ.html: FAQ.src FAQ.tcl + FAQ.src > FAQ.html + +# create the FAQ in text form +#FAQ: FAQ.src FAQ.tcl +# FAQ.src text > FAQ + +# generate home page +homepage.html: homepage.src common.tcl configure + homepage.src > homepage.html + +realapps.html: realapps.src common.tcl + realapps.src > realapps.html + +RSH = ssh +RCP = scp + +# install various html docs on our web server +install-html: FAQ.html homepage.html realapps.html pkgIndex.tcl cgi.tcl + cp FAQ.html $(NISTCGI_HTMLDIR)/ + cp homepage.html $(NISTCGI_HTMLDIR)/index.html + cp realapps.html $(NISTCGI_HTMLDIR)/ + -$(RSH) $(NISTCGI_HOST) mkdir $(NISTCGI_LIBDIR)/ + $(RCP) cgi.tcl pkgIndex.tcl $(NISTCGI_HOST):$(NISTCGI_LIBDIR)/ + for i in $(EXAMPLES) ; do \ + $(CGI_TCL_EXECUTABLE) $(srcdir)/fixline1 $(NISTCGI_INTERPDIR) < $(srcdir)/example/$$i > $$i ; \ + $(RCP) $$i $(NISTCGI_EXAMPLEDIR)/ ; \ + rm -f $$i ; \ + done + +# add recursive support to the build process. +subdir_do: force + @for i in $(SUBDIRS); do \ + echo "Making $(DO) in $${i}..." ; \ + if [ -d ./$$i ] ; then \ + if (rootme=`pwd`/ ; export rootme ; \ + rootsrc=`cd $(srcdir); pwd`/ ; export rootsrc ; \ + cd ./$$i; \ + $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \ + else exit 1 ; fi ; \ + else true ; fi ; \ + done +force: + +## dependencies will be put after this line... ## -- cgit v1.2.3-70-g09d2