Age | Commit message (Collapse) | Author |
|
.ilk files in a PC-Alpine "build clean" command.
|
|
when s_cert_store is NULL, and also only freeing s_cert_store when all
certificates in the .alpine-smime/ca directory fail to load.
|
|
|
|
since clients such as Thunderbird do not validate signatures that use
sha1 digest.
|
|
|
|
what happened and decide accordingly. Fixes the fact that Alpine will
fail to create self signed certificate, when the .pwd directory does
not exist.
|
|
the password file is encrypted using a private key/public certificate
pair. If one such pair cannot be found, one will be created.
|
|
entering a password to read an encrypted message will make Alpine
forget the key and not ask the password to unlock it again in case it
is necessary to unlock it again. Reported by Ulf-Dietrich Braumann.
|
|
Users have the option to build with older versions of OpenSSL or with
version 1.1.0. The current code is transitional and it is intended
that we will move Alpine to build exclusively with version 1.1.0 or
above in the future. This update also recognizes if we are using
LibreSSL. It was tested with version 2.4.2.
|
|
adding memory freeing calls when necessary.
|
|
user is sometimes asked to import a certificate and sometimes a key.
* Fix a case of memory freed twice introduced in commit 4bf825141c...
|
|
that encrypts password file in case that the new key/certificate pairs
have the same name as the old key/certificate.
|
|
to encrypt a password file in the SMIME setup configuration screen.
|
|
file, writes a non-secure encrypted password file until Alpine is
restarted again.
|
|
* Update of copyright notice
* Update to release notes to indicate support of RFC 2971.
|
|
the certificate to lowercase, which may make Alpine not be able to
read such certificate. Reported by Dennis Davis.
|
|
in signatures, when the option "Validate Using Certificate Store Only"
is enabled. If the user does not wish to save it, validation will fail.
|
|
remote server and the private key is not available.
* SMIME: Management of several alternate name (SAN) certificates is
improved. When importing a SAN certificate, also import a certificate
for the filename, besides for the e-mail addresses in the
certificate.
* When saving an attachment, the "^T" command leads to a screen where the
"A" command can be used to add a file. A directory can be added by
pressing "^X" after the "A" command. Added after a suggestion by
Stefan Goessling.
|
|
file containing the certificate, as the name to be displayed in the
certificate management screen for certificate authorities. Suggested
by Matthias Rieber.
|
|
being transferred, a local copy was not being retained, and therefore
no copy was being transferred to the remote server.
|
|
|
|
remote containers. Reported by Matthias Rieber.
|
|
lisblank.
* Clean up some code in pith/smime.c.
|
|
not using it anyway.)
|
|
in system.h.
|
|
* SMIME: Cancelling entering password to unlock key will not reprompt.
* Creating repo at repo.or.cz
|
|
* SMIME: Crash when a certificate has an invalid date of validity. Also
Alpine will use the function ASN1_TIME_print to determine the date of
validity. Reported by Ben Stienstra.
* SMIME: Crash when atempting to unlock the password file and an
incorrect password is entered.
* Alpine version 2.20.4 would not build in Windows, due to a missing
#ifdef SMIME directive in file alpine/mailpart.c. Reported by
Ulf-Dietrich Braunmann.
* Pico: Code reorganization in the search command to make it easier to
add subcommands of the search command.
* Pico: Search command can do a case sensitive match. Use the Ctrl-^
subcommand of the search command to bring this choice into view.
* For a multipart/alternative message, the Take Address command will
work on the part that is being read.
|
|
* SMIME: If a message contains a RFC822 atachment that is
signed/decrypted add the ability to view its SMIME information.
* SMIME: The ^E command that gives information on the certificate
is only available for messages that have a signed or encrypted part.
* Fix vulnerability in regex library. This only affects those who use
this library, such as the windows version of Alpine. See
http://www.kb.cert.org/vuls/id/695940.
* HTML: Add support for decoding entities in hexadecimal notation.
Suggested by Tulipánt Gergely.
* Pico: Add the ability to search for strings in the beginning or end
of a line. In the search menu, pressing Ctrl-^ toggles the prompt
to search for a string at the beginning of a line. Another press of
Ctrl-^ toggles the prompt to search for a string at the end of a line,
and pressing Ctrl-^ one more time searches for the string anywhere in
the text.
|
|
* Further enhancement to the configure script in finding the location
of the SSL include and library files, when they are installed in th e
default location by openssl.
* When Alpine sends an attachment, it will set the boundary attribute
in lower case, as some SMTP servers, such as those of libero.it
reject messages if the boundary attribute is in uppercase.
* Alpine fails to remove temporary files used during a display or sending
filter. Fix contributed by Phil Brooke.
* SMIME: Crash when checking the signature of a message that contains
a RFC822 attached message. Reported by Holger Trapp and Bjorn Krellner.
|
|
* crash on importing certificates that do not have an email address
associated to them, such as those of a Certificate Authority.
* Disable saving new passwords to the password file. Implemented
by Louis Raphael from dpslabs.com.
* Panda IMAP does not decode correctly Korean text encoded in UTF-8.
Reported by Chulho Yang.
|
|
* Aggregate operations allows bouncing a list of messages using a role.
Suggested by Ulf-Dietrich Braumann.
* Compilation error of module pith/reply.c if SMIME is not defined (as in
Windows Alpine). There was a misplaced parenthesis.
* Update to S/MIME to explain how to use a PKCS12 certificate in
Alpine.
* Fix error in compare_certs function, that would modify the name of
the certificates after sorting them, and return when no certificates
are given.
* When replying to several messages, subject will be decoded first,
and then stripped from re/fwd before they are compared to determine
the subject of the replied message.
* Add $(LIBINTL) to the flags to link rpdump, rpload, alpined and
alpineldap because MAC OSX 10.8 x86_64 needs it.
* When the download of an attachment is interrumpted, Alpine stills
caches what was downloaded, making the download incomplete for
subsequent calls of Alpine attempting to open the attachment. In the
future, Alpine will not cache any downloaded part of the attachment
when it is interrupted.
|
|
* Alpine would not parse options from the command line, such
as -patterns-filters2, correctly.
* Add /usr/local/include as a path to find include and libs files
for openssl in FreeBSD.
* Management certificate screen now prints, in addition to the e-mail
address of the owner of the certificates, the dates of validity
and the MD5 hash of such certificates.
* crash when processing message/rfc822 attachments that are encoded
in base64.
* Openssl: if /usr/local/ssl exists, assume that this is the intended
place where ssl libraries, include files and certificates are located.
Typically, distributions do not use this directory, so its existence
indicates that Openssl has been specially installed there, so it
is probably a preferred place to get the system Openssl files.
* Postponed messages whose content-type is text/html, text/enriched and
text/richtext are sent with that content-type, even though, after
resuming composition, Alpine had changed its type to text/plain.
* HTML: <BR>, <BR />, and <BR/&> are considered the same inline tag;
the same is valid for the <HR> tag.
|
|
* S/MIME Alpine would compute incorrectly the signature of a message
that contains 8bit if the option "Enable 8bit ESMTP Negotiation" is
enabled, the message contains 8bit characters and the smtp server
supports 8bit sending.
* Crash while redrawing S/MIME configuration screen when importing a
certificate
* When forwarding a message before opening it, the message might not be
found. The problem is in the forward_body function, where the section
of the body is not correctly set in all instances.
* When forwarding a signed message Alpine might forward the message as
a multipart message, instead of just selecting the body of the
message. Change to forward the signed part only. This aligns Alpine
with what it does when it replies to a similar message.
|
|
none is specified.
|
|
* Introduce the option "Validate Using Certificate Store Only", and
make it the default. This will make Alpine check for the validity of
signatures in certificates that a user has installed in their
system, and not in the certificates that come with the message. A
user can override this, although is not recommended, by disabling
this feature.
* When viewing a signed message, the ^E command would present an
empty screen or Alpine would crash because when Alpine would get the
PKCS7 body of the message from body->sparep, it would not decode it
properly due to the new way in which the sparep pointer is encoded
that was introduced in version 2.19.991.
* When a signed message is forwarded, the message might not be filtered
correctly, and mime information might make it into the body of the
forwarded message. In order to produce this, the message must be
forwarded from the index screen and not be opened. The reason why
this makes a difference is because opening a signed message changes
its body structure. The reason why a person could forward a message
before reading it is because the person could already be aware of
the content of the message (e.g. the message is in the sent-mail
folder).
* When a message fails to validate and the body is saved from the server
for validation, be careful in the way that body part pointers are
set, in order to do this we split the mail_body function into two
parts, one that gets the body, the other that gets the section of
the body. The new function that gets the section of the body
(mail_body_section), is used to assign pointers of the reconstructed
new body.
* When a container has not been defined, transferring messages to a
container will succeed, and the name of the container will be
written on screen.
* When Alpine is receiving the envelopes from an imap server, it
attempts to generate the index line immediately; while doing so it
might need to compute a score, and for this, it might need to go
back and do some operation in the same imap server. In this case,
Alpine will crash with a "lock when already locked" message. In
order to avoid this crash, a new check in match_pattern was added to
Alpine to avoid the second trip to a server that is busy sending us
envelopes. Reported by Peter Koellner.
* Update copyright notice in mswin.rc and pmapi.rc, as well as first
time user notice and special request notice.
* Alpine cannot handle correctly some characters in the Windows-1256
character set, which might lead to a crash or a corruption in the
screen. Work was done to contain the bug. A more complete fix will be
done in a future release. Reported by Professor Robert Funnell.
* Decode the name of attachment names, so they can be written as part
of the description of the part.
* When transferring certificates to a local container, create container
with default names PublicContainer, PrivateContainer and CAContainer,
as appropriate for these files, unless the user has provided some
other names.
|
|
works.
* When a message is sent encrypted, add the sender certificate so that
the sender can decrypt it too.
* When a message is signed and encrypted, first sign it and then encrypt
it. This changes the usual order of encrypting and then signing, and it has
the shortcoming of making bigger messages. However, this is the way that
most clients work with S/MIME, and so for compatibility with other programs,
we will send signed, then encrypted, instead of encrypted, then signed.
Hmm... should we sign the encrypted part?
* Avoid the first RSET smtp command, as this causes delays in some evily
managed servers.
|
|
body->nested.part instead of b->nested.part in the
do_detached_signature_verify function, and save its body and mime
headers in create_local_cache. Now all signed messages should
verify correctly.
* Protect against potential crash bug in write_passfile function by
checking if text != NULL. text can only be null if there are no
passwords to save. We assume we could get write_passfile called
with null arguments, so this is just to protect that.
* Add handling of corner cases to several functions by initializing some
variables. Reported and patched by James Jerkins.
* When selecting the certificate/key pair to encrypt/decrypt the password
file choose it in this order:
- if -pwdcertdir is given look for certificates there, if nothing
there, we bail out;
- otherwise we look in the default directory, if anything there
and it matches to be a key/cert pair, we use it;
- otherwise we check if smime_init() has been called. If not
we call it;
- we check if a key/cert pair has been found with smime initialized,
if so, use it and copy it to the default directory;
- if not, check if there is anything in the default smime directories
(.alpine-smime/private and .alpine-smime/public), and in this
case copy it to the default.
- otherwise we bail. We will eventually create a certificate/key
pair for the user;
- finally, if we called smime_init(), we call smime_deinit().
Throughout this process, if smime_init() was not called before
we tried to get the cert/key pair we exit this process without
ps_global->smime->inited set, so that other process that need
to call smime_init() get the right structure initialized. This is
done because we might pick a cert/key pair to decrypt the password
file.
|
|
content that is needed for validation.
|
|
/usr/local/etc/openssl, under the advice of Sam Hathaway.
* Add management certificate support for containers.
* Fix crashing bugs introduced in version 2.19.9, which did not allow
alpine to start with the -passfile and use a remote pinerc. Reported by
Ulf-Dietrich Braumann.
* fix a bug which was introduced in version 2.19.9, where Alpine would
free a certificate associated to a key after encryption, and so this
could not be used during decryption. We use X509_dup to copy the cert
and so make the copy be freed, and not the original.
* S/MIME: sign messages using intermediate certificates when needed and
possible.
|
|
off.
* Fix compilation bug that made build fail if passfile was not defined.
|
|
* S/MIME configuration screen would deinitialize smime, not allowing
it to send encrypted or signed messages.
* Add documentation for /loser option in definition of external servers.
* crashing bug in certificate management screen due to a BIO_free() call
of memory that had not been allocated.
* When the password file is decrypted, smime is inited. If smime is inited
before the .pinerc is read, some values might not be correctly set.
* When a password file exists, and S/MIME is enabled, encrypt it by either
using an existing key/certificate pair. The key is saved separately
in ~/.alpine-smime/.pwd, or in the directory specified by the
-pwdcertdir command line option.
|
|
failed when attempting to sign it, with and "Error writing pipe"
error.
* Using a .pinerc file outside the home directory made Alpine not find
the .alpine-smime directory with certificates.
* Configuration screen for S/MIME adds ability to manage certificates.
(currently available to users who manage certificates in
directories, not in containers, which will be available in the next
alpha release.)
|
|
* Forwarding messages with attachments of content-type multipart, failed when
attempting to signed it, with and "Error writing pipe" error.
|
|
|
|
for patches.freeiz.com/alpine/. Work in progress.
* prototype function tigetstr in pico/osdep/terminal.c
* folders encoded in modified utf7 are transformed their names to a human
readable utf8.
* New attempt to fix smime support in Alpine. Messages sent by alpine
with or without attachments should validate in all servers and in
all folder formats.
|
|
Alpine.
* When writing the .pinerc file, lines could not be longer than
10,000 characters, or else this caused corruption in the .pinerc data.
Now they are allowed to be of any size.
* Fix a problem that made Alpine remove files before they were open by
the viewer. It requires that the user has an equivalent to a command
such as "ps auxww" to list the list of processes. The default is
"/bin/ps auxww", but it can be changed at compile time with the option
--with-ps-cmd.
* Remove -lregex from linker flags when building --with-supplied-regex.
* Fix _INIT_ token for reply quote string to include support for 8-bit
in personal names.
|
|
* Alpine computes the signature of a signed message on a different message than the one
it sends, because of this, messages that are sent can not be validated either in the
sent-mail folder, nor in the server that receives such message.
|
|
* Fix in configure script for recognition of SSL files in Ubuntu 12.04
* Alpine does not attempt to automatically reopen a collection that
was not opened due to cancellation by the user. Instead, the user
must try to open it explicitly.
* few improvements on new /tls1, /tls1_1, etc. options.
|
|
* increase of encryption of S/MIME messages.
|
|
|