| Age | Commit message (Collapse) | Author |
|---|
|
|
|
problems exist, so I can go back to the exact bits that caused the
problem.
|
|
multipart/mixed message that contain a signed part.
|
|
the full text of the original message in a multipart type attachment,
instead of the first body part of the replied message.
|
|
multipart/signed, Alpine will include the text of the original
message in a reply message, instead of including a multipart
attachment. Suggested by Barry Landy.
|
|
part. In this case, these attachments are not included in a reply,
even if the option "Include Attachments in Reply" is enabled. We
include these attachments in a reply too in this case (experimental.)
|
|
* Reversing the clearing of the rmap memory.
|
|
* rewrite of some code in pith/ical.c to make sure function prototypes are
correct.
* Add a separator line to the calendar entry in case, the calendar is sent
as the main body of the message.
|
|
Some add trailing nulls, some don't. We tie off the forward subject at
the location where it should end. Reported by Ferdinand Goldman.
|
|
was moving memory from allocated areas. Reported by Hisashi T Fujinaka
and Ferdinand Goldmann.
|
|
forward_subject function, as this causes problems with
overlapping memory. The problem exists in slackware 12.4.
Reported by Rich Shepard.
|
|
first part of this is also a multipart type, then Alpine might fail
to select the first text part when replying to a message. Reported by
Lucio Chiappetti.
|
|
|
|
but it differns in that it gives the time in which the message was
sent for messages that are less than a week old. it uses a 24 hour
format.
|
|
the subject, removing list name information from the subject (text
enclosed between "[" and "]".)
|
|
multipart/alternative messages for which it did not use to include
attachments.
|
|
to control features and variables when you start to reply to a
message.
|
|
* Update of copyright notice
* Update to release notes to indicate support of RFC 2971.
|
|
|
|
in system.h.
|
|
problem was that the menu must have size 10, even if not all items
are used, and in this case, it had size 2, making the routines that
process menu items crash.
* The feature Scramble the Message-ID When Sending will also scramble
the name, version and operative system in the message-id header.
Based on a contribution by Dennis Davis, which is itself based on a
contribution by Mark Hills.
|
|
* Ignore message from smtp server after a successful authentication
challenge.
* Alpine would not set include and lib paths for OpenSSL if this was
installed in /usr/local/ssl.
* If the .pinerc file is a symbolic link, Alpine might not write its
contents when saving its configuration.
* The _INIT_ token does not skip over non-alpha numeric characters in
the name. Reported by Andreas Fehr.
* If SSLDIR is defined somehow, do not disable S/MIME if the
SSLCERTSDIR is not found.
* Mismatch in size of UCS and CELL caused a corruption in the
content of a pointer, which made the speller in PC-Alpine get
the content of a word incorrectly.
* Update splash screen to version 2.20 in main repository.
* Skip testing openssl compatibility version when cross-compilation is
detected. Fix contributed by Antti Seppälä.
|
|
* crash on importing certificates that do not have an email address
associated to them, such as those of a Certificate Authority.
* Disable saving new passwords to the password file. Implemented
by Louis Raphael from dpslabs.com.
* Panda IMAP does not decode correctly Korean text encoded in UTF-8.
Reported by Chulho Yang.
|
|
* Aggregate operations allows bouncing a list of messages using a role.
Suggested by Ulf-Dietrich Braumann.
* Compilation error of module pith/reply.c if SMIME is not defined (as in
Windows Alpine). There was a misplaced parenthesis.
* Update to S/MIME to explain how to use a PKCS12 certificate in
Alpine.
* Fix error in compare_certs function, that would modify the name of
the certificates after sorting them, and return when no certificates
are given.
* When replying to several messages, subject will be decoded first,
and then stripped from re/fwd before they are compared to determine
the subject of the replied message.
* Add $(LIBINTL) to the flags to link rpdump, rpload, alpined and
alpineldap because MAC OSX 10.8 x86_64 needs it.
* When the download of an attachment is interrumpted, Alpine stills
caches what was downloaded, making the download incomplete for
subsequent calls of Alpine attempting to open the attachment. In the
future, Alpine will not cache any downloaded part of the attachment
when it is interrupted.
|
|
* Alpine would not parse options from the command line, such
as -patterns-filters2, correctly.
* Add /usr/local/include as a path to find include and libs files
for openssl in FreeBSD.
* Management certificate screen now prints, in addition to the e-mail
address of the owner of the certificates, the dates of validity
and the MD5 hash of such certificates.
* crash when processing message/rfc822 attachments that are encoded
in base64.
* Openssl: if /usr/local/ssl exists, assume that this is the intended
place where ssl libraries, include files and certificates are located.
Typically, distributions do not use this directory, so its existence
indicates that Openssl has been specially installed there, so it
is probably a preferred place to get the system Openssl files.
* Postponed messages whose content-type is text/html, text/enriched and
text/richtext are sent with that content-type, even though, after
resuming composition, Alpine had changed its type to text/plain.
* HTML: <BR>, <BR />, and <BR/&> are considered the same inline tag;
the same is valid for the <HR> tag.
|
|
* S/MIME Alpine would compute incorrectly the signature of a message
that contains 8bit if the option "Enable 8bit ESMTP Negotiation" is
enabled, the message contains 8bit characters and the smtp server
supports 8bit sending.
* Crash while redrawing S/MIME configuration screen when importing a
certificate
* When forwarding a message before opening it, the message might not be
found. The problem is in the forward_body function, where the section
of the body is not correctly set in all instances.
* When forwarding a signed message Alpine might forward the message as
a multipart message, instead of just selecting the body of the
message. Change to forward the signed part only. This aligns Alpine
with what it does when it replies to a similar message.
|
|
* Introduce the option "Validate Using Certificate Store Only", and
make it the default. This will make Alpine check for the validity of
signatures in certificates that a user has installed in their
system, and not in the certificates that come with the message. A
user can override this, although is not recommended, by disabling
this feature.
* When viewing a signed message, the ^E command would present an
empty screen or Alpine would crash because when Alpine would get the
PKCS7 body of the message from body->sparep, it would not decode it
properly due to the new way in which the sparep pointer is encoded
that was introduced in version 2.19.991.
* When a signed message is forwarded, the message might not be filtered
correctly, and mime information might make it into the body of the
forwarded message. In order to produce this, the message must be
forwarded from the index screen and not be opened. The reason why
this makes a difference is because opening a signed message changes
its body structure. The reason why a person could forward a message
before reading it is because the person could already be aware of
the content of the message (e.g. the message is in the sent-mail
folder).
* When a message fails to validate and the body is saved from the server
for validation, be careful in the way that body part pointers are
set, in order to do this we split the mail_body function into two
parts, one that gets the body, the other that gets the section of
the body. The new function that gets the section of the body
(mail_body_section), is used to assign pointers of the reconstructed
new body.
* When a container has not been defined, transferring messages to a
container will succeed, and the name of the container will be
written on screen.
* When Alpine is receiving the envelopes from an imap server, it
attempts to generate the index line immediately; while doing so it
might need to compute a score, and for this, it might need to go
back and do some operation in the same imap server. In this case,
Alpine will crash with a "lock when already locked" message. In
order to avoid this crash, a new check in match_pattern was added to
Alpine to avoid the second trip to a server that is busy sending us
envelopes. Reported by Peter Koellner.
* Update copyright notice in mswin.rc and pmapi.rc, as well as first
time user notice and special request notice.
* Alpine cannot handle correctly some characters in the Windows-1256
character set, which might lead to a crash or a corruption in the
screen. Work was done to contain the bug. A more complete fix will be
done in a future release. Reported by Professor Robert Funnell.
* Decode the name of attachment names, so they can be written as part
of the description of the part.
* When transferring certificates to a local container, create container
with default names PublicContainer, PrivateContainer and CAContainer,
as appropriate for these files, unless the user has provided some
other names.
|
|
* check bounds and tie strings off to improve security. Contributed by
James Jerkins.
* Alpine crashed when a user attempted to add a folder collection, due
to bug in GET_NAMESPACE in imap4r1.c.
|
|
Alpine.
* When writing the .pinerc file, lines could not be longer than
10,000 characters, or else this caused corruption in the .pinerc data.
Now they are allowed to be of any size.
* Fix a problem that made Alpine remove files before they were open by
the viewer. It requires that the user has an equivalent to a command
such as "ps auxww" to list the list of processes. The default is
"/bin/ps auxww", but it can be changed at compile time with the option
--with-ps-cmd.
* Remove -lregex from linker flags when building --with-supplied-regex.
* Fix _INIT_ token for reply quote string to include support for 8-bit
in personal names.
|
|
|
|
a url by
a browser.
|
|
* Add silent token to display filter
* Add option to preserve To: and Cc: fields on replies.
|
|
|
