summaryrefslogtreecommitdiff
path: root/imap/src
AgeCommit message (Collapse)Author
2020-02-20 * Remove debug information in net_soutr(), which makes Alpine printEduardo Chappa
extra debug information as messages in the screen.
2020-02-19 * Correct the NTLM authenticator to make sure Alpine compiles whenEduardo Chappa
support for the NTLM authenticator is compiled into Alpine.
2020-02-19 * Added support for SALS-IR (rfc 4959) and similar support for otherEduardo Chappa
protocols (SMTP, NNTP, POP3) as some SMTP servers do not support a round-trip two step authentication. For example, davmail does not support PLAIN authentication in SMTP using the challenge-response scheme. Implemented after a report by Geoffrey Bodwin.
2020-02-09 * Creation of port wxp to build Alpine in Windows XP. At the timeEduardo Chappa
of this writing, the port w32 is the same as the port wxp, but it is intended to target other 32 bit operating systems.
2020-02-03 * Add variable system-certs-file to indicate the location of a containerEduardo Chappa
of CA certificates. This complements the variable system-certs-path that gives the location the directory that containes CA certificates.
2020-01-26 * Add the file imap/src/c-client/auth_bea.c, needed for the compilationEduardo Chappa
of Alpine. Reported by Bob Bernstein.
2020-01-26 * Add support for the OAUTHBEARER authentication method in Gmail. Thanks toEduardo Chappa
Alexander Perlis for suggesting it and explaining how the method works.
2020-01-25 * New variable system-certs-path that allows users to indicate theEduardo Chappa
location of the directory where folders are located. In PC-Alpine this must be C:\libressl\ssl\certs. The C: drive can be replaced by the name of the drive where the binary and DLL files are located.
2020-01-19 * Initial release of Alpine version 2.22.Eduardo Chappa
2020-01-19 * Creating w32 port for compilation of Alpine. This is intended for oldEduardo Chappa
machines that cannot be updated. Long story short: Always use the command "build wnt" to build Alpine. If that does not work, try "build w32", which is for machines that are too old and do not have any way to use modern encryption protocols such as TLSv1.2. The version of Alpine built in modern machines will be called alpine.exe, and the binary built with the port w32 will be called alpine32 in the repository. All other binaries can be downloaded from the main web site, and they will not have the suffix "32" there.
2020-01-18 * Adding pith_ssl_encryption function to linkage.h.Eduardo Chappa
2020-01-18 * Various fixes to copyright notices, make sure we allocate enoughEduardo Chappa
memory in file http.c, and move Pico version to 5.10.
2020-01-17 * Add file imap/src/osdep/nt/nt_libressl.c, which is useful to buildEduardo Chappa
the windows version of Alpine in a 32-bit environment.
2020-01-16 * Fix a few more misspellings in the source code of Alpine.Eduardo Chappa
List contributed by Jens Schleusener.
2020-01-15 * Fix a number of misspellings in the source code of Alpine. I hav onlyEduardo Chappa
fixed those that belong to the source code of Alpine and do not come from an external source. List contributed by Jens Schleusener.
2020-01-15 * Add configuration screen for XOAUTH, so users can configure their ownEduardo Chappa
client-id and client-secret information.
2020-01-10 * Add file ssl_win.c, which is necessary for the compilation ofEduardo Chappa
PC-Alpine.
2020-01-04 * The feature that stopped alpine from saving passwords in the passwordEduardo Chappa
file prevented users from actually saving their passwords in Windows and MAC OS. Fix the code so that passwords will be saved. Also, update the documentation of this feature. * Fix a buffer overflow bug in the XOAUTH2 code (off by one error). * Update PC-Alpine to work with Libressl version 3.0.2 instead of version 2.5.5 (update build.bat and lib files from the LibreSSL build). * Erase SSLXXXXXX file. * ssl_nt.c actually directs the code to ssl_libressl.c or ssl_win.c. The file ssl_libressl.c is the file ssl_unix.c from the unix osdep directory. The file ssl_win.c is the native SSL windows code. The Unix side provides S/MIME support for Alpine and the latest encryption protocols support for Alpine when connecting to a secure server, while the windows side provide TLSv1_3 support for Alpine, but not S/MIME support. In order to provide unix code for TLSv1_3 (once LibreSSL supports it) edit the file os_nt.c and remove the comments on the #ifdef section. This would provide both TLSv1_3 and S/MIME support with unix code. On the other hand, when we provide TLSv1_3 with the Windows code we need to undefine DF_ENCRYPTION_RANGE, and this is done in the file include/config.wnt.h. The way this is done as of this moment is by commenting an #else directive that preceedes this #undefine. * Update makefile.nt and friends in the windows side to account for the addition of XOAUTH2, and the use of only ssl_nt.c when dealing with Alpine. * Define SMIME_SSLCERTS as c:\libressl\ssl\certs, so that these certificates be considered while checking a digital S/MIME signature. * Improvements to the SMARTTIME24 token to account for changes in year.
2019-11-25 * Add lnpno port to imap/src/osdep/unix/Makefile to account for ports that doEduardo Chappa
not need/want to build using pam. Add more robustness to the configure process, to add -lcrypt to the build flags when --with-bundled-tools=no is given.
2019-10-27 * Fix a bug in commit 418e8bc5789d... which made Alpine ignore a challengeEduardo Chappa
during authentication using CRAM-MD5. The intention was to ignore the challenge in the PLAIN authentication. This made Alpine fail to authenticate when using the CRAM-MD5 authenticator. Reported by Stefan Mueller.
2019-10-08 * Compilation problem and error in logic in function ssl_validate_cert.Eduardo Chappa
The issue with logic was that of the two checks for validation of if the first one was not done, the second one would not be done. The intention was to do the second check if the first check failed. Reported by Erich Ecknet.
2019-10-06 * Check for name of server in "server validation code" in more places.Eduardo Chappa
* Document request message for first time use reports IMAP for any remote connection. Report the correct type of service instead.
2019-09-26 * Return a read() to be a read of one byte. The current code has a codeEduardo Chappa
for a read of zero bytes, but this causes problems. Reported by Greg Oster.
2019-09-06 * Fixes so that Alpine will build in the Windows operating system. ThisEduardo Chappa
update takes care of building with LibreSSL.
2019-09-01 * Improvements to documentation and behavior of Alpine when users get aEduardo Chappa
non-empty challenge in a smtp server.
2019-08-22 * Ignore extra text in challenge from smtp server during authentication.Eduardo Chappa
2019-08-20 * Improve code that determines the type of encryption that is used accordingEduardo Chappa
to user's request.
2019-07-11 * Alpine crashes when trying to post an article in a newsgroup and theEduardo Chappa
connection is closed while the post is being composed, but later the post is attempted to be sent. In some instances, the stream may be open and closed during this time, but Alpine does not realize the connection was closed and attempts the post without a netstream, producing a crash.
2019-07-05 * Fix compilation error produced when a specific encryption protocolEduardo Chappa
has been disabled during the compilation of the Openssl library.
2019-06-22 * New version 2.21.99999 (06/22/2019)Eduardo Chappa
2019-05-23 * Code to limit versions of the encryption protocol uses old calls,Eduardo Chappa
and not the new calls.
2019-05-08 * Buffer overflow bug on auth_md5.c, where not enough dynamic memoryEduardo Chappa
was being allocated. Based on a report by Erich Eckner.
2019-05-04 * Initial release of XOAUTH2 authentication support in Alpine forEduardo Chappa
Gmail.
2019-04-28 * Compilation failure in Solaris when ldap is enabled. Reported byEduardo Chappa
"mechanic" in comp.mail.pine. * Configure script modifications to set the ldap-dir value correctly. * Fix some typos in documentation.
2019-02-28 * Clean up some code in the ssl_unix module. It adds to the lastEduardo Chappa
modifications in the ssl_unix module.
2019-02-17 * Rewrite support for specific SSL encryption protocols, includingEduardo Chappa
a. Add a new variable: encryption-protocol-range, which can be used to specify the minimum and maximum versions of the TLS protocol that Alpine will attempt to use to encrypt its communication with the server. b. Add support for the Server Name Identification (SNI) extension needed for TLSv1.3. c. Remove the DTLS code. It was not being used.
2019-02-15 * Restore recognition of empty directories. It was deleted by mistakeEduardo Chappa
when added support for internationalization in folders. Based on a report by Michael Rutter.
2019-02-15 * Add /auth=XYZ to the way to define a server. This allows users toEduardo Chappa
select the method to authenticate to an IMAP, SMTP or POP3 server. Examples are /auth=plain, or /auth=gssapi, etc.
2019-01-26 * Ignore errors coming from errors in parsing the ID from an IMAPEduardo Chappa
server. Based on a report by Stefan in the Alpine-info mailing list.
2018-12-08 * Let the client do a RSET when an error occurs while sending anEduardo Chappa
email via SMTP, but still report the previous error to the client.
2018-12-08 * Alpine would not report an error correctly in the case that there wasEduardo Chappa
a failure using an SMTP server. This was due to c-client sending a RSET command after the failure and Alpine reporting the reply of this command.
2018-09-30 * Define TLS_client_version to be the highest TLSv1*_client_methodEduardo Chappa
that is available in case that this is not defined by OpenSSL.
2018-09-29 * Add the /tls1_3 modifier to establish connections use the TLS protocolEduardo Chappa
version 1.3.
2018-08-12 * Several changes to the compilation of Alpine in Windows to useEduardo Chappa
LibreSSL in connecting to external servers. This complements the changes to support S/MIME. In particular, we add support for validation of certificates by using C:\\libressl\ssl\certs as the place to save CA certificates. In order to help users, some certificates are distributed. TODO: Kerberos port, w2k.
2018-07-06 * Remap UBOGON from 0xfffd to 0xfff8, since 0xfffd represents a missingEduardo Chappa
character in UTF-8, but 0xfff8 is undefined.
2018-06-14 * More changes to make Valgrind happy.Eduardo Chappa
2018-05-21 * Add the "g" option to the select command that works in IMAPEduardo Chappa
servers that implement the X-GM-EXT-1 capability (such as the one offered by Gmail.) This allows users to do selection in Alpine as if they were doing a search in the web interface for Gmail.
2018-05-13 * For a calendar entry with method PUBLISH, we show all entries in the ↵Eduardo Chappa
calendar. When "More Details" is selected for each individual event, the description of that entry is shown only. When the calendar is opened from the view attachment list screen, all entries will be shown. Mske sure there are no memory leaks. * Reverse some of the changes to make valgrind happy, as this may make Alpine crash by using memory that was released.
2018-05-13 * More changes to make Valgrind happy. Work in progress.Eduardo Chappa
2018-02-26 * New version 2.21.999Eduardo Chappa
* rewrite of some code in pith/ical.c to make sure function prototypes are correct. * Add a separator line to the calendar entry in case, the calendar is sent as the main body of the message.