| Age | Commit message (Collapse) | Author |
|---|
|
|
|
* Make sure titlebar (the line at the top of the screen) always
contains the name of the folder/newsgroup that is open, if this fits
in the title.
* Fix a bug in the Windows version in which width of characters in the
width ambiguous zone was computed incorrectly. Reported by
Ulf-Dietrich Braumann.
|
|
* Fix documentation for search to beginning and to end of line,
which had not been updated, even though the behavior had changed.
* Exact search is sticky, that is, once an exact search is done, so will
be the next ones. This is consistent with the default behavior where
all searches are not exact.
* Pico upgraded to versio 5.08.
* some hunks of integrate.patch were added to this source code
to make handling of menus consistent, and reduce the size of
integrate.patch at the same time.
|
|
* SMIME: Cancelling entering password to unlock key will not reprompt.
* Creating repo at repo.or.cz
|
|
* SMIME: Crash when a certificate has an invalid date of validity. Also
Alpine will use the function ASN1_TIME_print to determine the date of
validity. Reported by Ben Stienstra.
* SMIME: Crash when atempting to unlock the password file and an
incorrect password is entered.
* Alpine version 2.20.4 would not build in Windows, due to a missing
#ifdef SMIME directive in file alpine/mailpart.c. Reported by
Ulf-Dietrich Braunmann.
* Pico: Code reorganization in the search command to make it easier to
add subcommands of the search command.
* Pico: Search command can do a case sensitive match. Use the Ctrl-^
subcommand of the search command to bring this choice into view.
* For a multipart/alternative message, the Take Address command will
work on the part that is being read.
|
|
* If the charset of a message can not be determined, use the value set
in the "Unknown Character Set" option.
* Resizing setup screen will redraw screen.
* Unix Alpine only. Experimental: If Alpine/Pico finds a UCS4 code
in the width ambiguous zone, it will use other means to determine
the width, such as call wcwidth.
|
|
* SMIME: If a message contains a RFC822 atachment that is
signed/decrypted add the ability to view its SMIME information.
* SMIME: The ^E command that gives information on the certificate
is only available for messages that have a signed or encrypted part.
* Fix vulnerability in regex library. This only affects those who use
this library, such as the windows version of Alpine. See
http://www.kb.cert.org/vuls/id/695940.
* HTML: Add support for decoding entities in hexadecimal notation.
Suggested by Tulipánt Gergely.
* Pico: Add the ability to search for strings in the beginning or end
of a line. In the search menu, pressing Ctrl-^ toggles the prompt
to search for a string at the beginning of a line. Another press of
Ctrl-^ toggles the prompt to search for a string at the end of a line,
and pressing Ctrl-^ one more time searches for the string anywhere in
the text.
|
|
* Further enhancement to the configure script in finding the location
of the SSL include and library files, when they are installed in th e
default location by openssl.
* When Alpine sends an attachment, it will set the boundary attribute
in lower case, as some SMTP servers, such as those of libero.it
reject messages if the boundary attribute is in uppercase.
* Alpine fails to remove temporary files used during a display or sending
filter. Fix contributed by Phil Brooke.
* SMIME: Crash when checking the signature of a message that contains
a RFC822 attached message. Reported by Holger Trapp and Bjorn Krellner.
|
|
* Ignore message from smtp server after a successful authentication
challenge.
* Alpine would not set include and lib paths for OpenSSL if this was
installed in /usr/local/ssl.
* If the .pinerc file is a symbolic link, Alpine might not write its
contents when saving its configuration.
* The _INIT_ token does not skip over non-alpha numeric characters in
the name. Reported by Andreas Fehr.
* If SSLDIR is defined somehow, do not disable S/MIME if the
SSLCERTSDIR is not found.
* Mismatch in size of UCS and CELL caused a corruption in the
content of a pointer, which made the speller in PC-Alpine get
the content of a word incorrectly.
* Update splash screen to version 2.20 in main repository.
* Skip testing openssl compatibility version when cross-compilation is
detected. Fix contributed by Antti Seppälä.
|
|
* crash on importing certificates that do not have an email address
associated to them, such as those of a Certificate Authority.
* Disable saving new passwords to the password file. Implemented
by Louis Raphael from dpslabs.com.
* Panda IMAP does not decode correctly Korean text encoded in UTF-8.
Reported by Chulho Yang.
|
|
* Aggregate operations allows bouncing a list of messages using a role.
Suggested by Ulf-Dietrich Braumann.
* Compilation error of module pith/reply.c if SMIME is not defined (as in
Windows Alpine). There was a misplaced parenthesis.
* Update to S/MIME to explain how to use a PKCS12 certificate in
Alpine.
* Fix error in compare_certs function, that would modify the name of
the certificates after sorting them, and return when no certificates
are given.
* When replying to several messages, subject will be decoded first,
and then stripped from re/fwd before they are compared to determine
the subject of the replied message.
* Add $(LIBINTL) to the flags to link rpdump, rpload, alpined and
alpineldap because MAC OSX 10.8 x86_64 needs it.
* When the download of an attachment is interrumpted, Alpine stills
caches what was downloaded, making the download incomplete for
subsequent calls of Alpine attempting to open the attachment. In the
future, Alpine will not cache any downloaded part of the attachment
when it is interrupted.
|
|
* Alpine would not parse options from the command line, such
as -patterns-filters2, correctly.
* Add /usr/local/include as a path to find include and libs files
for openssl in FreeBSD.
* Management certificate screen now prints, in addition to the e-mail
address of the owner of the certificates, the dates of validity
and the MD5 hash of such certificates.
* crash when processing message/rfc822 attachments that are encoded
in base64.
* Openssl: if /usr/local/ssl exists, assume that this is the intended
place where ssl libraries, include files and certificates are located.
Typically, distributions do not use this directory, so its existence
indicates that Openssl has been specially installed there, so it
is probably a preferred place to get the system Openssl files.
* Postponed messages whose content-type is text/html, text/enriched and
text/richtext are sent with that content-type, even though, after
resuming composition, Alpine had changed its type to text/plain.
* HTML: <BR>, <BR />, and <BR/&> are considered the same inline tag;
the same is valid for the <HR> tag.
|
|
* S/MIME Alpine would compute incorrectly the signature of a message
that contains 8bit if the option "Enable 8bit ESMTP Negotiation" is
enabled, the message contains 8bit characters and the smtp server
supports 8bit sending.
* Crash while redrawing S/MIME configuration screen when importing a
certificate
* When forwarding a message before opening it, the message might not be
found. The problem is in the forward_body function, where the section
of the body is not correctly set in all instances.
* When forwarding a signed message Alpine might forward the message as
a multipart message, instead of just selecting the body of the
message. Change to forward the signed part only. This aligns Alpine
with what it does when it replies to a similar message.
|
|
* Introduce the option "Validate Using Certificate Store Only", and
make it the default. This will make Alpine check for the validity of
signatures in certificates that a user has installed in their
system, and not in the certificates that come with the message. A
user can override this, although is not recommended, by disabling
this feature.
* When viewing a signed message, the ^E command would present an
empty screen or Alpine would crash because when Alpine would get the
PKCS7 body of the message from body->sparep, it would not decode it
properly due to the new way in which the sparep pointer is encoded
that was introduced in version 2.19.991.
* When a signed message is forwarded, the message might not be filtered
correctly, and mime information might make it into the body of the
forwarded message. In order to produce this, the message must be
forwarded from the index screen and not be opened. The reason why
this makes a difference is because opening a signed message changes
its body structure. The reason why a person could forward a message
before reading it is because the person could already be aware of
the content of the message (e.g. the message is in the sent-mail
folder).
* When a message fails to validate and the body is saved from the server
for validation, be careful in the way that body part pointers are
set, in order to do this we split the mail_body function into two
parts, one that gets the body, the other that gets the section of
the body. The new function that gets the section of the body
(mail_body_section), is used to assign pointers of the reconstructed
new body.
* When a container has not been defined, transferring messages to a
container will succeed, and the name of the container will be
written on screen.
* When Alpine is receiving the envelopes from an imap server, it
attempts to generate the index line immediately; while doing so it
might need to compute a score, and for this, it might need to go
back and do some operation in the same imap server. In this case,
Alpine will crash with a "lock when already locked" message. In
order to avoid this crash, a new check in match_pattern was added to
Alpine to avoid the second trip to a server that is busy sending us
envelopes. Reported by Peter Koellner.
* Update copyright notice in mswin.rc and pmapi.rc, as well as first
time user notice and special request notice.
* Alpine cannot handle correctly some characters in the Windows-1256
character set, which might lead to a crash or a corruption in the
screen. Work was done to contain the bug. A more complete fix will be
done in a future release. Reported by Professor Robert Funnell.
* Decode the name of attachment names, so they can be written as part
of the description of the part.
* When transferring certificates to a local container, create container
with default names PublicContainer, PrivateContainer and CAContainer,
as appropriate for these files, unless the user has provided some
other names.
|
|
|
|
|
|
content that is needed for validation.
|
|
|
|
/usr/local/etc/openssl, under the advice of Sam Hathaway.
* Add management certificate support for containers.
* Fix crashing bugs introduced in version 2.19.9, which did not allow
alpine to start with the -passfile and use a remote pinerc. Reported by
Ulf-Dietrich Braumann.
* fix a bug which was introduced in version 2.19.9, where Alpine would
free a certificate associated to a key after encryption, and so this
could not be used during decryption. We use X509_dup to copy the cert
and so make the copy be freed, and not the original.
* S/MIME: sign messages using intermediate certificates when needed and
possible.
|
|
|
|
off.
* Fix compilation bug that made build fail if passfile was not defined.
|
|
* S/MIME configuration screen would deinitialize smime, not allowing
it to send encrypted or signed messages.
* Add documentation for /loser option in definition of external servers.
* crashing bug in certificate management screen due to a BIO_free() call
of memory that had not been allocated.
* When the password file is decrypted, smime is inited. If smime is inited
before the .pinerc is read, some values might not be correctly set.
* When a password file exists, and S/MIME is enabled, encrypt it by either
using an existing key/certificate pair. The key is saved separately
in ~/.alpine-smime/.pwd, or in the directory specified by the
-pwdcertdir command line option.
|
|
* Fix windows strings to match version.
|
|
|
|
|
|
* Forwarding messages with attachments of content-type multipart, failed when
attempting to signed it, with and "Error writing pipe" error.
|
|
|
|
* Fixes to documentation to update old washington.edu/alpine site
for patches.freeiz.com/alpine/
|
|
* Add backward search support for Pico and file browser.
* Style tag in html body causes all text to disappear until we find
a </style> tag.
* Shorten name of temporary file for a mailcap command.
|
|
* check bounds and tie strings off to improve security. Contributed by
James Jerkins.
* Alpine crashed when a user attempted to add a folder collection, due
to bug in GET_NAMESPACE in imap4r1.c.
|
|
* Alpine computes the signature of a signed message on a different message than the one
it sends, because of this, messages that are sent can not be validated either in the
sent-mail folder, nor in the server that receives such message.
|
|
* Pico: Justification works without need to define a quote string, it
allows justification of blocks indented with spaces.
|
|
* Fixes to configure script so that it will not require PAM for every system.
* Fix to configure script so that it will use CPPFLAGS instead of
CPPCFLAGS, and so the --with-ssl-include-dir option take effect
during the build. Fix by Ulf-Dietrich Braumann.
* Fix in WebAlpine: do not use deprecated dereference in pointer,
needs to use tcl_getstringresult() instead. Reported by Ulf-Dietrich
Braumann.
* Fix in configure script to detect location of tcl library; add
/usr/local in FreeBSD and fix a bug in configure script that used
$alpine_TCLINC instead of $alpine_TCLINC/tcl.h. Reported and fixed
by Werner Scheinast.
* Move SSL configurations from UW-IMAP to configure script.
|
|
* Pico: search backwards.
* do not allow List- headers to be set up by users in accordance with
RFC 2369.
* minor fixes for new justification support (add comparison of a line
with the previous *and* the next).
|
|
configure script.
|
|
|
|
a url by
a browser.
|
|
|
