diff options
Diffstat (limited to 'pico/Makefile.in')
| -rw-r--r-- | pico/Makefile.in | 133 |
1 files changed, 42 insertions, 91 deletions
diff --git a/pico/Makefile.in b/pico/Makefile.in index 400cd499..730e1331 100644 --- a/pico/Makefile.in +++ b/pico/Makefile.in @@ -1,8 +1,9 @@ -# Makefile.in generated by automake 1.12.1 from Makefile.am. +# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2012 Free Software Foundation, Inc. - +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -27,23 +28,6 @@ VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ - esac; \ - test $$am__dry = yes; \ - } pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -64,8 +48,7 @@ build_triplet = @build@ host_triplet = @host@ bin_PROGRAMS = pico$(EXEEXT) pilot$(EXEEXT) subdir = pico -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ - $(top_srcdir)/depcomp $(top_srcdir)/mkinstalldirs +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \ $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \ @@ -129,11 +112,6 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ @@ -192,7 +170,6 @@ C_CLIENT_TARGET = @C_CLIENT_TARGET@ C_CLIENT_WITH_IPV6 = @C_CLIENT_WITH_IPV6@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -212,6 +189,7 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ ISPELLPROG = @ISPELLPROG@ +Includedir = @Includedir@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ @@ -230,7 +208,6 @@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKE = @MAKE@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ @@ -277,7 +254,6 @@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ acx_pthread_config = @acx_pthread_config@ @@ -306,16 +282,16 @@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ -includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ +oldIncludedir = @oldIncludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ @@ -379,17 +355,14 @@ $(am__aclocal_m4_deps): clean-noinstLIBRARIES: -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) -libpico.a: $(libpico_a_OBJECTS) $(libpico_a_DEPENDENCIES) $(EXTRA_libpico_a_DEPENDENCIES) +libpico.a: $(libpico_a_OBJECTS) $(libpico_a_DEPENDENCIES) -rm -f libpico.a $(libpico_a_AR) libpico.a $(libpico_a_OBJECTS) $(libpico_a_LIBADD) $(RANLIB) libpico.a install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) + test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ - fi; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p || test -f $$p1; \ @@ -429,10 +402,10 @@ clean-binPROGRAMS: list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list -pico$(EXEEXT): $(pico_OBJECTS) $(pico_DEPENDENCIES) $(EXTRA_pico_DEPENDENCIES) +pico$(EXEEXT): $(pico_OBJECTS) $(pico_DEPENDENCIES) @rm -f pico$(EXEEXT) $(LINK) $(pico_OBJECTS) $(pico_LDADD) $(LIBS) -pilot$(EXEEXT): $(pilot_OBJECTS) $(pilot_DEPENDENCIES) $(EXTRA_pilot_DEPENDENCIES) +pilot$(EXEEXT): $(pilot_OBJECTS) $(pilot_DEPENDENCIES) @rm -f pilot$(EXEEXT) $(LINK) $(pilot_OBJECTS) $(pilot_LDADD) $(LIBS) @@ -490,11 +463,11 @@ clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd -# into them and run 'make' without going through this Makefile. -# To change the values of 'make' variables: instead of editing Makefiles, -# (1) if the variable is set in 'config.status', edit 'config.status' -# (which will cause the Makefiles to be regenerated when you run 'make'); -# (2) otherwise, pass the desired values on the 'make' command line. +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ @@ -558,10 +531,6 @@ ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done -cscopelist-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \ - done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ @@ -625,20 +594,6 @@ GTAGS: && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags @@ -674,10 +629,13 @@ distdir: $(DISTFILES) done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ - $(am__make_dryrun) \ - || test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ @@ -715,15 +673,10 @@ install-am: all-am installcheck: installcheck-recursive install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: @@ -806,25 +759,23 @@ ps-am: uninstall-am: uninstall-binPROGRAMS -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \ - cscopelist-recursive ctags-recursive install-am install-strip \ - tags-recursive +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ + install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-binPROGRAMS \ - clean-generic clean-libtool clean-noinstLIBRARIES cscopelist \ - cscopelist-recursive ctags ctags-recursive distclean \ - distclean-compile distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am html html-am info info-am \ - install install-am install-binPROGRAMS install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-recursive uninstall uninstall-am \ + clean-generic clean-libtool clean-noinstLIBRARIES ctags \ + ctags-recursive distclean distclean-compile distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-binPROGRAMS \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs installdirs-am \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ + pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ uninstall-binPROGRAMS |