diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 968 |
1 files changed, 0 insertions, 968 deletions
diff --git a/Makefile b/Makefile deleted file mode 100644 index 4c4830c9..00000000 --- a/Makefile +++ /dev/null @@ -1,968 +0,0 @@ -# Makefile.in generated by automake 1.13.4 from Makefile.am. -# Makefile. Generated from Makefile.in by configure. - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - - - -# ======================================================================== -# Copyright 2006-2008 University of Washington -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# ======================================================================== - -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/alpine -pkgincludedir = $(includedir)/alpine -pkglibdir = $(libdir)/alpine -pkglibexecdir = $(libexecdir)/alpine -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = x86_64-suse-linux-gnu -host_triplet = x86_64-suse-linux-gnu -subdir = . -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/configure $(am__configure_deps) \ - $(top_srcdir)/include/config.h.in mkinstalldirs ABOUT-NLS \ - README compile config.guess config.rpath config.sub depcomp \ - install-sh missing ltmain.sh -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/m4_ax_prog_cc_for_build.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno config.status.lineno -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/include/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_$(V)) -am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY)) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ - ctags-recursive dvi-recursive html-recursive info-recursive \ - install-data-recursive install-dvi-recursive \ - install-exec-recursive install-html-recursive \ - install-info-recursive install-pdf-recursive \ - install-ps-recursive install-recursive installcheck-recursive \ - installdirs-recursive pdf-recursive ps-recursive \ - tags-recursive uninstall-recursive -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -man1dir = $(mandir)/man1 -am__installdirs = "$(DESTDIR)$(man1dir)" -NROFF = nroff -MANS = $(man_MANS) -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -am__recursive_targets = \ - $(RECURSIVE_TARGETS) \ - $(RECURSIVE_CLEAN_TARGETS) \ - $(am__extra_recursive_targets) -AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ - cscope distdir dist dist-all distcheck -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -CSCOPE = cscope -DIST_SUBDIRS = $(SUBDIRS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - if test -d "$(distdir)"; then \ - find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -rf "$(distdir)" \ - || { sleep 5 && rm -rf "$(distdir)"; }; \ - else :; fi -am__post_remove_distdir = $(am__remove_distdir) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -DIST_ARCHIVES = $(distdir).tar.gz -GZIP_ENV = --best -DIST_TARGETS = dist-gzip -distuninstallcheck_listfiles = find . -type f -print -am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ - | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' -distcleancheck_listfiles = find . -type f -print -ACLOCAL = ${SHELL} /run/media/echappa/Alpine/alpine/alpinegit/missing aclocal-1.13 -ALPINE_DATESTAMP = Sun Feb 25 12:46:50 MST 2018 -ALPINE_HOSTSTAMP = linux.suse -AMTAR = $${TAR-tar} -AM_CFLAGS = -g -pthread -AM_DEFAULT_VERBOSITY = 1 -AM_LDFLAGS = -AR = /usr/bin/ar -AUTOCONF = ${SHELL} /run/media/echappa/Alpine/alpine/alpinegit/missing autoconf -AUTOHEADER = ${SHELL} /run/media/echappa/Alpine/alpine/alpinegit/missing autoheader -AUTOMAKE = ${SHELL} /run/media/echappa/Alpine/alpine/alpinegit/missing automake-1.13 -AWK = gawk -BUILD_EXEEXT = -BUILD_OBJEXT = -CC = gcc -std=gnu99 -CCDEPMODE = depmode=gcc3 -CC_FOR_BUILD = gcc -CFLAGS = -g -CFLAGS_FOR_BUILD = -g -O2 -CP = /usr/bin/cp -CPP = gcc -E -CPPFLAGS = -I/usr/include/openssl -CPPFLAGS_FOR_BUILD = -CPP_FOR_BUILD = gcc -E -CYGPATH_W = echo -C_CLIENT_AUTHS = gss ntl -C_CLIENT_CFLAGS = EXTRACFLAGS=" -DTLSV1_2 -I/usr/include/openssl -g" -C_CLIENT_GCCOPTLEVEL = GCCOPTLEVEL="-O0" -C_CLIENT_LDFLAGS = EXTRALDFLAGS=" -L/usr/lib -ltcl8.6 -lntlm -lgssapi_krb5 -lpam -lldap -lssl -lcrypto -ldl -ltinfo -llber -lpam -lkrb5" -C_CLIENT_SPECIALS = SSLINCLUDE=/usr/include/openssl SSLLIB=/usr/lib SSLDIR=/etc/ssl SSLCERTS=/etc/ssl/certs SSLKEYS=/etc/ssl/private -C_CLIENT_TARGET = lsu -C_CLIENT_WITH_IPV6 = touch imap/ip6 -DEFS = -DHAVE_CONFIG_H -DEPDIR = .deps -DLLTOOL = false -DSYMUTIL = -DUMPBIN = -ECHO_C = -ECHO_N = -n -ECHO_T = -EGREP = /usr/bin/grep -E -EXEEXT = -FGREP = /usr/bin/grep -F -GMSGFMT = /usr/bin/msgfmt -GMSGFMT_015 = /usr/bin/msgfmt -GREP = /usr/bin/grep -INSTALL = /usr/bin/install -c -INSTALL_DATA = ${INSTALL} -m 644 -INSTALL_PROGRAM = ${INSTALL} -INSTALL_SCRIPT = ${INSTALL} -INSTALL_STRIP_PROGRAM = $(install_sh) -c -s -INTLLIBS = -INTL_MACOSX_LIBS = -ISPELLPROG = hunspell -LD = /usr/x86_64-suse-linux/bin/ld -m elf_x86_64 -LDFLAGS = -L/usr/lib -LDFLAGS_FOR_BUILD = -LIBICONV = -liconv -LIBINTL = -LIBOBJS = -LIBS = -ltcl8.6 -lntlm -lgssapi_krb5 -lpam -lldap -lssl -lcrypto -ldl -ltinfo -llber -lpam -lkrb5 -LIBTOOL = $(SHELL) $(top_builddir)/libtool -LIBTOOL_DEPS = ./ltmain.sh -LIPO = -LN = /usr/bin/ln -LN_S = ln -s -LS = /usr/bin/ls -LTLIBICONV = -liconv -LTLIBINTL = -LTLIBOBJS = -MAINT = # -MAKE = /usr/bin/make -MAKEINFO = ${SHELL} /run/media/echappa/Alpine/alpine/alpinegit/missing makeinfo -MANIFEST_TOOL = : -MKDIR_P = /usr/bin/mkdir -p -MSGFMT = /usr/bin/msgfmt -MSGFMT_015 = /usr/bin/msgfmt -MSGMERGE = /usr/bin/msgmerge -NM = /usr/bin/nm -B -NMEDIT = -NPA_PROG = -OBJDUMP = objdump -OBJEXT = o -OTOOL = -OTOOL64 = -PACKAGE = alpine -PACKAGE_BUGREPORT = chappa@washington.edu -PACKAGE_NAME = alpine -PACKAGE_STRING = alpine 2.21.999 -PACKAGE_TARNAME = alpine -PACKAGE_URL = -PACKAGE_VERSION = 2.21.999 -PATH_SEPARATOR = : -POSUB = po -PTHREAD_CC = gcc -std=gnu99 -PTHREAD_CFLAGS = -pthread -PTHREAD_LIBS = -PWPROG = /usr/bin/passwd -RANLIB = ranlib -REGEX_BUILD = -RM = /usr/bin/rm -SED = /usr/bin/sed -SENDMAIL = /usr/sbin/sendmail -SET_MAKE = -SHELL = /bin/sh -SPELLPROG = hunspell -STRIP = strip -USE_NLS = yes -VERSION = 2.21.999 -WEB_BINDIR = -WEB_BUILD = -WEB_PUBCOOKIE_BUILD = -WEB_PUBCOOKIE_LIB = -WEB_PUBCOOKIE_LINK = -XGETTEXT = /usr/bin/xgettext -XGETTEXT_015 = /usr/bin/xgettext -abs_builddir = /run/media/echappa/Alpine/alpine/alpinegit -abs_srcdir = /run/media/echappa/Alpine/alpine/alpinegit -abs_top_builddir = /run/media/echappa/Alpine/alpine/alpinegit -abs_top_srcdir = /run/media/echappa/Alpine/alpine/alpinegit -ac_ct_AR = ar -ac_ct_CC = gcc -ac_ct_CC_FOR_BUILD = gcc -ac_ct_DUMPBIN = -acx_pthread_config = -alpine_interactive_spellcheck = /usr/bin/hunspell -alpine_simple_spellcheck = /usr/bin/hunspell -l -am__include = include -am__leading_dot = . -am__quote = -am__tar = $${TAR-tar} chof - "$$tardir" -am__untar = $${TAR-tar} xf - -bindir = ${exec_prefix}/bin -build = x86_64-suse-linux-gnu -build_alias = -build_cpu = x86_64 -build_os = linux-gnu -build_vendor = suse -builddir = . -datadir = ${datarootdir} -datarootdir = ${prefix}/share -docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} -dvidir = ${docdir} -exec_prefix = ${prefix} -host = x86_64-suse-linux-gnu -host_alias = -host_cpu = x86_64 -host_os = linux-gnu -host_vendor = suse -htmldir = ${docdir} -includedir = ${prefix}/include -infodir = ${datarootdir}/info -install_sh = ${SHELL} /run/media/echappa/Alpine/alpine/alpinegit/install-sh -libdir = ${exec_prefix}/lib64 -libexecdir = ${exec_prefix}/lib -localedir = ${datadir}/locale -localstatedir = ${prefix}/var -mandir = ${datarootdir}/man -mkdir_p = $(MKDIR_P) -oldincludedir = /usr/include -pdfdir = ${docdir} -prefix = /usr/local -program_transform_name = s,x,x, -psdir = ${docdir} -sbindir = ${exec_prefix}/sbin -sharedstatedir = ${prefix}/com -srcdir = . -sysconfdir = ${prefix}/etc -target_alias = -top_build_prefix = -top_builddir = . -top_srcdir = . -EXTRA_DIST = config.rpath VERSION README LICENSE -SUBDIRS = m4 po $(REGEX_BUILD) pith pico alpine $(WEB_PUBCOOKIE_BUILD) $(WEB_BUILD) -BUILT_SOURCES = c-client.d c-client $(WEB_PUBCOOKIE_LINK) -CLEANFILES = c-client -man_MANS = doc/man1/alpine.1 doc/man1/pico.1 doc/man1/pilot.1 doc/man1/rpdump.1 doc/man1/rpload.1 -ACLOCAL_AMFLAGS = --install -I m4 -all: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) all-recursive - -.SUFFIXES: -am--refresh: Makefile - @: -$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ - $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: # $(am__configure_deps) - $(am__cd) $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): # $(am__aclocal_m4_deps) - $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -$(am__aclocal_m4_deps): - -include/config.h: include/stamp-h1 - @if test ! -f $@; then rm -f include/stamp-h1; else :; fi - @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) include/stamp-h1; else :; fi - -include/stamp-h1: $(top_srcdir)/include/config.h.in $(top_builddir)/config.status - @rm -f include/stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status include/config.h -$(top_srcdir)/include/config.h.in: # $(am__configure_deps) - ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) - rm -f include/stamp-h1 - touch $@ - -distclean-hdr: - -rm -f include/config.h include/stamp-h1 - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool config.lt -install-man1: $(man_MANS) - @$(NORMAL_INSTALL) - @list1=''; \ - list2='$(man_MANS)'; \ - test -n "$(man1dir)" \ - && test -n "`echo $$list1$$list2`" \ - || exit 0; \ - echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ - { for i in $$list1; do echo "$$i"; done; \ - if test -n "$$list2"; then \ - for i in $$list2; do echo "$$i"; done \ - | sed -n '/\.1[a-z]*$$/p'; \ - fi; \ - } | while read p; do \ - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; echo "$$p"; \ - done | \ - sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ - sed 'N;N;s,\n, ,g' | { \ - list=; while read file base inst; do \ - if test "$$base" = "$$inst"; then list="$$list $$file"; else \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ - fi; \ - done; \ - for i in $$list; do echo "$$i"; done | $(am__base_list) | \ - while read files; do \ - test -z "$$files" || { \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ - done; } - -uninstall-man1: - @$(NORMAL_UNINSTALL) - @list=''; test -n "$(man1dir)" || exit 0; \ - files=`{ for i in $$list; do echo "$$i"; done; \ - l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ - sed -n '/\.1[a-z]*$$/p'; \ - } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ - dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) - -# This directory's subdirectories are mostly independent; you can cd -# into them and run 'make' without going through this Makefile. -# To change the values of 'make' variables: instead of editing Makefiles, -# (1) if the variable is set in 'config.status', edit 'config.status' -# (which will cause the Makefiles to be regenerated when you run 'make'); -# (2) otherwise, pass the desired values on the 'make' command line. -$(am__recursive_targets): - @fail=; \ - if $(am__make_keepgoing); then \ - failcom='fail=yes'; \ - else \ - failcom='exit 1'; \ - fi; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-recursive -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-recursive - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscope: cscope.files - test ! -s cscope.files \ - || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) -clean-cscope: - -rm -f cscope.files -cscope.files: clean-cscope cscopelist -cscopelist: cscopelist-recursive - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -rm -f cscope.out cscope.in.out cscope.po.out cscope.files - -distdir: $(DISTFILES) - $(am__remove_distdir) - test -d "$(distdir)" || mkdir "$(distdir)" - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - $(am__make_dryrun) \ - || test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done - -test -n "$(am__skip_mode_fix)" \ - || find "$(distdir)" -type d ! -perm -755 \ - -exec chmod u+rwx,go+rx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r "$(distdir)" -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__post_remove_distdir) - -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 - $(am__post_remove_distdir) - -dist-lzip: distdir - tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz - $(am__post_remove_distdir) - -dist-xz: distdir - tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz - $(am__post_remove_distdir) - -dist-tarZ: distdir - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__post_remove_distdir) - -dist-shar: distdir - shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz - $(am__post_remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__post_remove_distdir) - -dist dist-all: - $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' - $(am__post_remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lz*) \ - lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ - *.tar.xz*) \ - xz -dc $(distdir).tar.xz | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac - chmod -R a-w $(distdir) - chmod u+w $(distdir) - mkdir $(distdir)/_build $(distdir)/_inst - chmod a-w $(distdir) - test -d $(distdir)/_build || exit 0; \ - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && am__cwd=`pwd` \ - && $(am__cd) $(distdir)/_build \ - && ../configure --srcdir=.. --prefix="$$dc_install_base" \ - $(AM_DISTCHECK_CONFIGURE_FLAGS) \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ - && cd "$$am__cwd" \ - || exit 1 - $(am__post_remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' -distuninstallcheck: - @test -n '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: trying to run $@ with an empty' \ - '$$(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - $(am__cd) '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am -check: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) check-recursive -all-am: Makefile $(MANS) -installdirs: installdirs-recursive -installdirs-am: - for dir in "$(DESTDIR)$(man1dir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -clean: clean-recursive - -clean-am: clean-generic clean-libtool clean-local mostlyclean-am - -distclean: distclean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-hdr \ - distclean-libtool distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: install-man - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: install-man1 - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: uninstall-man - -uninstall-man: uninstall-man1 - -.MAKE: $(am__recursive_targets) all check install install-am \ - install-strip - -.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ - am--refresh check check-am clean clean-cscope clean-generic \ - clean-libtool clean-local cscope cscopelist-am ctags ctags-am \ - dist dist-all dist-bzip2 dist-gzip dist-lzip dist-shar \ - dist-tarZ dist-xz dist-zip distcheck distclean \ - distclean-generic distclean-hdr distclean-libtool \ - distclean-tags distcleancheck distdir distuninstallcheck dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-man1 \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - installdirs-am maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ - ps ps-am tags tags-am uninstall uninstall-am uninstall-man \ - uninstall-man1 - - -.PHONY: c-client.d c-client gssapi_proxy.l - -c-client.d: - if test ! -L c-client ; then $(LN_S) imap/c-client c-client ; fi - -c-client: - $(C_CLIENT_WITH_IPV6) - cd imap && $(MAKE) $(C_CLIENT_TARGET) $(C_CLIENT_CFLAGS) $(C_CLIENT_LDFLAGS) $(C_CLIENT_GCCOPTLEVEL) EXTRAAUTHENTICATORS="$(C_CLIENT_AUTHS)" EXTRASPECIALS="$(C_CLIENT_SPECIALS)" - -gssapi_proxy.l: - if test ! -L c-client/auth_gss_proxy.c ; then $(LN_S) /run/media/echappa/Alpine/alpine/alpinegit/web/src/pubcookie/auth_gss_proxy.c c-client/auth_gss_proxy.c ; fi - -clean-local: - cd imap && $(MAKE) clean - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: |