diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 968 |
1 files changed, 968 insertions, 0 deletions
diff --git a/Makefile b/Makefile new file mode 100644 index 00000000..e1b32bcd --- /dev/null +++ b/Makefile @@ -0,0 +1,968 @@ +# Makefile.in generated by automake 1.13.4 from Makefile.am. +# Makefile. Generated from Makefile.in by configure. + +# Copyright (C) 1994-2013 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + + +# ======================================================================== +# Copyright 2006-2008 University of Washington +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# ======================================================================== + +am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/alpine +pkgincludedir = $(includedir)/alpine +pkglibdir = $(libdir)/alpine +pkglibexecdir = $(libexecdir)/alpine +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = x86_64-suse-linux-gnu +host_triplet = x86_64-suse-linux-gnu +subdir = . +DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ + $(top_srcdir)/configure $(am__configure_deps) \ + $(top_srcdir)/include/config.h.in mkinstalldirs ABOUT-NLS \ + README compile config.guess config.rpath config.sub depcomp \ + install-sh missing ltmain.sh +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \ + $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \ + $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ + $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/m4/m4_ax_prog_cc_for_build.m4 \ + $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/include/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_$(V)) +am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY)) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ + ctags-recursive dvi-recursive html-recursive info-recursive \ + install-data-recursive install-dvi-recursive \ + install-exec-recursive install-html-recursive \ + install-info-recursive install-pdf-recursive \ + install-ps-recursive install-recursive installcheck-recursive \ + installdirs-recursive pdf-recursive ps-recursive \ + tags-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +man1dir = $(mandir)/man1 +am__installdirs = "$(DESTDIR)$(man1dir)" +NROFF = nroff +MANS = $(man_MANS) +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +am__recursive_targets = \ + $(RECURSIVE_TARGETS) \ + $(RECURSIVE_CLEAN_TARGETS) \ + $(am__extra_recursive_targets) +AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ + cscope distdir dist dist-all distcheck +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +CSCOPE = cscope +DIST_SUBDIRS = $(SUBDIRS) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + if test -d "$(distdir)"; then \ + find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -rf "$(distdir)" \ + || { sleep 5 && rm -rf "$(distdir)"; }; \ + else :; fi +am__post_remove_distdir = $(am__remove_distdir) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +DIST_ARCHIVES = $(distdir).tar.gz +GZIP_ENV = --best +DIST_TARGETS = dist-gzip +distuninstallcheck_listfiles = find . -type f -print +am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ + | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' +distcleancheck_listfiles = find . -type f -print +ACLOCAL = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/missing aclocal-1.13 +ALPINE_DATESTAMP = Mon Dec 4 16:02:35 MST 2017 +ALPINE_HOSTSTAMP = jctgjb2 +AMTAR = $${TAR-tar} +AM_CFLAGS = -g -pthread +AM_DEFAULT_VERBOSITY = 1 +AM_LDFLAGS = +AR = /usr/bin/ar +AUTOCONF = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/missing autoconf +AUTOHEADER = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/missing autoheader +AUTOMAKE = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/missing automake-1.13 +AWK = gawk +BUILD_EXEEXT = +BUILD_OBJEXT = +CC = gcc -std=gnu99 +CCDEPMODE = depmode=gcc3 +CC_FOR_BUILD = gcc +CFLAGS = -g +CFLAGS_FOR_BUILD = -g -O2 +CP = /usr/bin/cp +CPP = gcc -E +CPPFLAGS = -I/usr/include/openssl +CPPFLAGS_FOR_BUILD = +CPP_FOR_BUILD = gcc -E +CYGPATH_W = echo +C_CLIENT_AUTHS = gss +C_CLIENT_CFLAGS = EXTRACFLAGS=" -DTLSV1_2 -I/usr/include/openssl -g" +C_CLIENT_GCCOPTLEVEL = GCCOPTLEVEL="-O0" +C_CLIENT_LDFLAGS = EXTRALDFLAGS=" -L/usr/lib -ltcl8.6 -lgssapi_krb5 -lpam -lldap -lssl -lcrypto -ldl -ltinfo -llber -lpam -lkrb5" +C_CLIENT_SPECIALS = SSLINCLUDE=/usr/include/openssl SSLLIB=/usr/lib SSLDIR=/etc/ssl SSLCERTS=/etc/ssl/certs SSLKEYS=/etc/ssl/private +C_CLIENT_TARGET = lsu +C_CLIENT_WITH_IPV6 = touch imap/ip6 +DEFS = -DHAVE_CONFIG_H +DEPDIR = .deps +DLLTOOL = false +DSYMUTIL = +DUMPBIN = +ECHO_C = +ECHO_N = -n +ECHO_T = +EGREP = /usr/bin/grep -E +EXEEXT = +FGREP = /usr/bin/grep -F +GMSGFMT = /usr/bin/msgfmt +GMSGFMT_015 = /usr/bin/msgfmt +GREP = /usr/bin/grep +INSTALL = /usr/bin/install -c +INSTALL_DATA = ${INSTALL} -m 644 +INSTALL_PROGRAM = ${INSTALL} +INSTALL_SCRIPT = ${INSTALL} +INSTALL_STRIP_PROGRAM = $(install_sh) -c -s +INTLLIBS = +INTL_MACOSX_LIBS = +ISPELLPROG = hunspell +LD = /usr/x86_64-suse-linux/bin/ld -m elf_x86_64 +LDFLAGS = -L/usr/lib +LDFLAGS_FOR_BUILD = +LIBICONV = -liconv +LIBINTL = +LIBOBJS = +LIBS = -ltcl8.6 -lgssapi_krb5 -lpam -lldap -lssl -lcrypto -ldl -ltinfo -llber -lpam -lkrb5 +LIBTOOL = $(SHELL) $(top_builddir)/libtool +LIBTOOL_DEPS = ./ltmain.sh +LIPO = +LN = /usr/bin/ln +LN_S = ln -s +LS = /usr/bin/ls +LTLIBICONV = -liconv +LTLIBINTL = +LTLIBOBJS = +MAINT = # +MAKE = /usr/bin/make +MAKEINFO = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/missing makeinfo +MANIFEST_TOOL = : +MKDIR_P = /usr/bin/mkdir -p +MSGFMT = /usr/bin/msgfmt +MSGFMT_015 = /usr/bin/msgfmt +MSGMERGE = /usr/bin/msgmerge +NM = /usr/bin/nm -B +NMEDIT = +NPA_PROG = +OBJDUMP = objdump +OBJEXT = o +OTOOL = +OTOOL64 = +PACKAGE = alpine +PACKAGE_BUGREPORT = chappa@washington.edu +PACKAGE_NAME = alpine +PACKAGE_STRING = alpine 2.21.9 +PACKAGE_TARNAME = alpine +PACKAGE_URL = +PACKAGE_VERSION = 2.21.9 +PATH_SEPARATOR = : +POSUB = po +PTHREAD_CC = gcc -std=gnu99 +PTHREAD_CFLAGS = -pthread +PTHREAD_LIBS = +PWPROG = /usr/bin/passwd +RANLIB = ranlib +REGEX_BUILD = +RM = /usr/bin/rm +SED = /usr/bin/sed +SENDMAIL = /usr/sbin/sendmail +SET_MAKE = +SHELL = /bin/sh +SPELLPROG = hunspell +STRIP = strip +USE_NLS = yes +VERSION = 2.21.9 +WEB_BINDIR = +WEB_BUILD = +WEB_PUBCOOKIE_BUILD = +WEB_PUBCOOKIE_LIB = +WEB_PUBCOOKIE_LINK = +XGETTEXT = /usr/bin/xgettext +XGETTEXT_015 = /usr/bin/xgettext +abs_builddir = /run/media/chappa/Work/alpine/alpinegit +abs_srcdir = /run/media/chappa/Work/alpine/alpinegit +abs_top_builddir = /run/media/chappa/Work/alpine/alpinegit +abs_top_srcdir = /run/media/chappa/Work/alpine/alpinegit +ac_ct_AR = ar +ac_ct_CC = gcc +ac_ct_CC_FOR_BUILD = gcc +ac_ct_DUMPBIN = +acx_pthread_config = +alpine_interactive_spellcheck = /usr/bin/hunspell +alpine_simple_spellcheck = /usr/bin/hunspell -l +am__include = include +am__leading_dot = . +am__quote = +am__tar = $${TAR-tar} chof - "$$tardir" +am__untar = $${TAR-tar} xf - +bindir = ${exec_prefix}/bin +build = x86_64-suse-linux-gnu +build_alias = +build_cpu = x86_64 +build_os = linux-gnu +build_vendor = suse +builddir = . +datadir = ${datarootdir} +datarootdir = ${prefix}/share +docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} +dvidir = ${docdir} +exec_prefix = ${prefix} +host = x86_64-suse-linux-gnu +host_alias = +host_cpu = x86_64 +host_os = linux-gnu +host_vendor = suse +htmldir = ${docdir} +includedir = ${prefix}/include +infodir = ${datarootdir}/info +install_sh = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/install-sh +libdir = ${exec_prefix}/lib64 +libexecdir = ${exec_prefix}/lib +localedir = ${datadir}/locale +localstatedir = ${prefix}/var +mandir = ${datarootdir}/man +mkdir_p = $(MKDIR_P) +oldincludedir = /usr/include +pdfdir = ${docdir} +prefix = /usr/local +program_transform_name = s,x,x, +psdir = ${docdir} +sbindir = ${exec_prefix}/sbin +sharedstatedir = ${prefix}/com +srcdir = . +sysconfdir = ${prefix}/etc +target_alias = +top_build_prefix = +top_builddir = . +top_srcdir = . +EXTRA_DIST = config.rpath VERSION README LICENSE +SUBDIRS = m4 po $(REGEX_BUILD) pith pico alpine $(WEB_PUBCOOKIE_BUILD) $(WEB_BUILD) +BUILT_SOURCES = c-client.d c-client $(WEB_PUBCOOKIE_LINK) +CLEANFILES = c-client +man_MANS = doc/man1/alpine.1 doc/man1/pico.1 doc/man1/pilot.1 doc/man1/rpdump.1 doc/man1/rpload.1 +ACLOCAL_AMFLAGS = --install -I m4 +all: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) all-recursive + +.SUFFIXES: +am--refresh: Makefile + @: +$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: # $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): # $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +include/config.h: include/stamp-h1 + @if test ! -f $@; then rm -f include/stamp-h1; else :; fi + @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) include/stamp-h1; else :; fi + +include/stamp-h1: $(top_srcdir)/include/config.h.in $(top_builddir)/config.status + @rm -f include/stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status include/config.h +$(top_srcdir)/include/config.h.in: # $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f include/stamp-h1 + touch $@ + +distclean-hdr: + -rm -f include/config.h include/stamp-h1 + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool config.lt +install-man1: $(man_MANS) + @$(NORMAL_INSTALL) + @list1=''; \ + list2='$(man_MANS)'; \ + test -n "$(man1dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.1[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ + done; } + +uninstall-man1: + @$(NORMAL_UNINSTALL) + @list=''; test -n "$(man1dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.1[a-z]*$$/p'; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) + +# This directory's subdirectories are mostly independent; you can cd +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(am__recursive_targets): + @fail=; \ + if $(am__make_keepgoing); then \ + failcom='fail=yes'; \ + else \ + failcom='exit 1'; \ + fi; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-recursive +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-recursive + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) +clean-cscope: + -rm -f cscope.files +cscope.files: clean-cscope cscopelist +cscopelist: cscopelist-recursive + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__post_remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 + $(am__post_remove_distdir) + +dist-lzip: distdir + tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz + $(am__post_remove_distdir) + +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz + $(am__post_remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__post_remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__post_remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__post_remove_distdir) + +dist dist-all: + $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' + $(am__post_remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lz*) \ + lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir) + chmod u+w $(distdir) + mkdir $(distdir)/_build $(distdir)/_inst + chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(AM_DISTCHECK_CONFIGURE_FLAGS) \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__post_remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @test -n '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: trying to run $@ with an empty' \ + '$$(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + $(am__cd) '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) check-recursive +all-am: Makefile $(MANS) +installdirs: installdirs-recursive +installdirs-am: + for dir in "$(DESTDIR)$(man1dir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) +clean: clean-recursive + +clean-am: clean-generic clean-libtool clean-local mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-hdr \ + distclean-libtool distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: install-man + +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: install-man1 + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: uninstall-man + +uninstall-man: uninstall-man1 + +.MAKE: $(am__recursive_targets) all check install install-am \ + install-strip + +.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ + am--refresh check check-am clean clean-cscope clean-generic \ + clean-libtool clean-local cscope cscopelist-am ctags ctags-am \ + dist dist-all dist-bzip2 dist-gzip dist-lzip dist-shar \ + dist-tarZ dist-xz dist-zip distcheck distclean \ + distclean-generic distclean-hdr distclean-libtool \ + distclean-tags distcleancheck distdir distuninstallcheck dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man install-man1 \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ + ps ps-am tags tags-am uninstall uninstall-am uninstall-man \ + uninstall-man1 + + +.PHONY: c-client.d c-client gssapi_proxy.l + +c-client.d: + if test ! -L c-client ; then $(LN_S) imap/c-client c-client ; fi + +c-client: + $(C_CLIENT_WITH_IPV6) + cd imap && $(MAKE) $(C_CLIENT_TARGET) $(C_CLIENT_CFLAGS) $(C_CLIENT_LDFLAGS) $(C_CLIENT_GCCOPTLEVEL) EXTRAAUTHENTICATORS="$(C_CLIENT_AUTHS)" EXTRASPECIALS="$(C_CLIENT_SPECIALS)" + +gssapi_proxy.l: + if test ! -L c-client/auth_gss_proxy.c ; then $(LN_S) /run/media/chappa/Work/alpine/alpinegit/web/src/pubcookie/auth_gss_proxy.c c-client/auth_gss_proxy.c ; fi + +clean-local: + cd imap && $(MAKE) clean + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: |