* New version 2.21.99

   * The online repo does not mimic the root local directory
     from which it is created. This is an attempt to fix this.
     This caused the problem that kerberos was not working
     with the bytes on the repo, but it would work on the root
     which created it. Reported by Holger Trapp.

8 files changed, 3120 insertions, 53 deletions

diff --git a/web/src/Makefile b/web/src/Makefile
new file mode 100644
index 00000000..01573395
--- /dev/null
+++ b/web/src/Makefile
@@ -0,0 +1,506 @@
+# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# web/src/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+# ========================================================================
+# Copyright 2006-2008 University of Washington
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# ========================================================================
+
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/alpine
+pkgincludedir = $(includedir)/alpine
+pkglibdir = $(libdir)/alpine
+pkglibexecdir = $(libexecdir)/alpine
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-suse-linux-gnu
+host_triplet = x86_64-suse-linux-gnu
+subdir = web/src
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/mkinstalldirs
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
+	$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
+	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/m4/m4_ax_prog_cc_for_build.m4 \
+	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/include/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/missing aclocal-1.13
+ALPINE_DATESTAMP = Mon Dec  4 16:02:35 MST 2017
+ALPINE_HOSTSTAMP = jctgjb2
+AMTAR = $${TAR-tar}
+AM_CFLAGS =  -g -pthread
+AM_DEFAULT_VERBOSITY = 1
+AM_LDFLAGS = 
+AR = /usr/bin/ar
+AUTOCONF = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/missing autoconf
+AUTOHEADER = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/missing autoheader
+AUTOMAKE = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/missing automake-1.13
+AWK = gawk
+BUILD_EXEEXT = 
+BUILD_OBJEXT = 
+CC = gcc -std=gnu99
+CCDEPMODE = depmode=gcc3
+CC_FOR_BUILD = gcc
+CFLAGS = -g
+CFLAGS_FOR_BUILD = -g -O2
+CP = /usr/bin/cp
+CPP = gcc -E
+CPPFLAGS = -I/usr/include/openssl 
+CPPFLAGS_FOR_BUILD = 
+CPP_FOR_BUILD = gcc -E
+CYGPATH_W = echo
+C_CLIENT_AUTHS = gss 
+C_CLIENT_CFLAGS = EXTRACFLAGS=" -DTLSV1_2 -I/usr/include/openssl  -g"
+C_CLIENT_GCCOPTLEVEL = GCCOPTLEVEL="-O0"
+C_CLIENT_LDFLAGS = EXTRALDFLAGS=" -L/usr/lib   -ltcl8.6 -lgssapi_krb5 -lpam -lldap -lssl -lcrypto -ldl  -ltinfo -llber -lpam -lkrb5"
+C_CLIENT_SPECIALS = SSLINCLUDE=/usr/include/openssl SSLLIB=/usr/lib SSLDIR=/etc/ssl SSLCERTS=/etc/ssl/certs SSLKEYS=/etc/ssl/private 
+C_CLIENT_TARGET = lsu
+C_CLIENT_WITH_IPV6 = touch imap/ip6
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = false
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /usr/bin/grep -E
+EXEEXT = 
+FGREP = /usr/bin/grep -F
+GMSGFMT = /usr/bin/msgfmt
+GMSGFMT_015 = /usr/bin/msgfmt
+GREP = /usr/bin/grep
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INTLLIBS = 
+INTL_MACOSX_LIBS = 
+ISPELLPROG = hunspell
+LD = /usr/x86_64-suse-linux/bin/ld -m elf_x86_64
+LDFLAGS = -L/usr/lib 
+LDFLAGS_FOR_BUILD = 
+LIBICONV = -liconv
+LIBINTL = 
+LIBOBJS = 
+LIBS =  -ltcl8.6 -lgssapi_krb5 -lpam -lldap -lssl -lcrypto -ldl  -ltinfo -llber -lpam -lkrb5
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIBTOOL_DEPS = ./ltmain.sh
+LIPO = 
+LN = /usr/bin/ln
+LN_S = ln -s
+LS = /usr/bin/ls
+LTLIBICONV = -liconv
+LTLIBINTL = 
+LTLIBOBJS = 
+MAINT = #
+MAKE = /usr/bin/make
+MAKEINFO = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/missing makeinfo
+MANIFEST_TOOL = :
+MKDIR_P = /usr/bin/mkdir -p
+MSGFMT = /usr/bin/msgfmt
+MSGFMT_015 = /usr/bin/msgfmt
+MSGMERGE = /usr/bin/msgmerge
+NM = /usr/bin/nm -B
+NMEDIT = 
+NPA_PROG = 
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = alpine
+PACKAGE_BUGREPORT = chappa@washington.edu
+PACKAGE_NAME = alpine
+PACKAGE_STRING = alpine 2.21.9
+PACKAGE_TARNAME = alpine
+PACKAGE_URL = 
+PACKAGE_VERSION = 2.21.9
+PATH_SEPARATOR = :
+POSUB = po
+PTHREAD_CC = gcc -std=gnu99
+PTHREAD_CFLAGS = -pthread
+PTHREAD_LIBS = 
+PWPROG = /usr/bin/passwd
+RANLIB = ranlib
+REGEX_BUILD = 
+RM = /usr/bin/rm
+SED = /usr/bin/sed
+SENDMAIL = /usr/sbin/sendmail
+SET_MAKE = 
+SHELL = /bin/sh
+SPELLPROG = hunspell
+STRIP = strip
+USE_NLS = yes
+VERSION = 2.21.9
+WEB_BINDIR = 
+WEB_BUILD = 
+WEB_PUBCOOKIE_BUILD = 
+WEB_PUBCOOKIE_LIB = 
+WEB_PUBCOOKIE_LINK = 
+XGETTEXT = /usr/bin/xgettext
+XGETTEXT_015 = /usr/bin/xgettext
+abs_builddir = /run/media/chappa/Work/alpine/alpinegit/web/src
+abs_srcdir = /run/media/chappa/Work/alpine/alpinegit/web/src
+abs_top_builddir = /run/media/chappa/Work/alpine/alpinegit
+abs_top_srcdir = /run/media/chappa/Work/alpine/alpinegit
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CC_FOR_BUILD = gcc
+ac_ct_DUMPBIN = 
+acx_pthread_config = 
+alpine_interactive_spellcheck = /usr/bin/hunspell
+alpine_simple_spellcheck = /usr/bin/hunspell -l
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = $${TAR-tar} chof - "$$tardir"
+am__untar = $${TAR-tar} xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-suse-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = suse
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-suse-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = suse
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/install-sh
+libdir = ${exec_prefix}/lib64
+libexecdir = ${exec_prefix}/lib
+localedir = ${datadir}/locale
+localstatedir = ${prefix}/var
+mandir = ${datarootdir}/man
+mkdir_p = $(MKDIR_P)
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+prefix = /usr/local
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = ${prefix}/etc
+target_alias = 
+top_build_prefix = ../../
+top_builddir = ../..
+top_srcdir = ../..
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign web/src/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign web/src/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: # $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	cscopelist-am ctags-am distclean distclean-generic \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am
+
+
+all:
+	cd /run/media/chappa/Work/alpine/alpinegit/web/src/cgi.tcl-1.10 && ./configure --prefix=/run/media/chappa/Work/alpine/alpinegit/web/lib
+
+install:
+	cd /run/media/chappa/Work/alpine/alpinegit/web/src/alpined.d && make install
+	cd /run/media/chappa/Work/alpine/alpinegit/web/src/cgi.tcl-1.10 && make install SCRIPTDIR=/run/media/chappa/Work/alpine/alpinegit/web/lib
+	cd /run/media/chappa/Work/alpine/alpinegit/web/lib && tclsh ./pkgcreate
+	if test -x pubcookie/wp_uidmapper ; then $(LN) -f pubcookie/wp_uidmapper /run/media/chappa/Work/alpine/alpinegit/web/bin ; fi
+	if test -x pubcookie/wp_tclsh ; then $(LN) -f pubcookie/wp_tclsh /run/media/chappa/Work/alpine/alpinegit/web/bin ; fi
+	if test -x pubcookie/wp_gssapi_proxy ; then $(LN) -f pubcookie/wp_gssapi_proxy /run/media/chappa/Work/alpine/alpinegit/web/bin ; fi
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/web/src/Makefile.in b/web/src/Makefile.in
index 50c36933..9a929dbc 100644
--- a/web/src/Makefile.in
+++ b/web/src/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
+# Makefile.in generated by automake 1.13.4 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -25,17 +25,7 @@
 #
 # ========================================================================
 VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -99,6 +89,8 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = web/src
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/mkinstalldirs
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
 	$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \
@@ -106,17 +98,11 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
 	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
 	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/m4/m4_ax_prog_cc_for_build.m4 \
 	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
-	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/VERSION \
-	$(top_srcdir)/VERSION $(top_srcdir)/VERSION \
-	$(top_srcdir)/VERSION $(top_srcdir)/VERSION \
-	$(top_srcdir)/VERSION $(top_srcdir)/VERSION \
-	$(top_srcdir)/VERSION $(top_srcdir)/VERSION \
-	$(top_srcdir)/VERSION $(top_srcdir)/VERSION \
-	$(top_srcdir)/configure.ac
+	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
 CONFIG_HEADER = $(top_builddir)/include/config.h
 CONFIG_CLEAN_FILES =
@@ -141,9 +127,10 @@ am__can_run_installinfo = \
     *) (install-info --version) >/dev/null 2>&1;; \
   esac
 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/mkinstalldirs
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
+ALPINE_DATESTAMP = @ALPINE_DATESTAMP@
+ALPINE_HOSTSTAMP = @ALPINE_HOSTSTAMP@
 AMTAR = @AMTAR@
 AM_CFLAGS = @AM_CFLAGS@
 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
@@ -153,13 +140,20 @@ AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
 AWK = @AWK@
+BUILD_EXEEXT = @BUILD_EXEEXT@
+BUILD_OBJEXT = @BUILD_OBJEXT@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
+CC_FOR_BUILD = @CC_FOR_BUILD@
 CFLAGS = @CFLAGS@
+CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@
 CP = @CP@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
+CPPFLAGS_FOR_BUILD = @CPPFLAGS_FOR_BUILD@
+CPP_FOR_BUILD = @CPP_FOR_BUILD@
 CYGPATH_W = @CYGPATH_W@
+C_CLIENT_AUTHS = @C_CLIENT_AUTHS@
 C_CLIENT_CFLAGS = @C_CLIENT_CFLAGS@
 C_CLIENT_GCCOPTLEVEL = @C_CLIENT_GCCOPTLEVEL@
 C_CLIENT_LDFLAGS = @C_CLIENT_LDFLAGS@
@@ -190,6 +184,7 @@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
 ISPELLPROG = @ISPELLPROG@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
+LDFLAGS_FOR_BUILD = @LDFLAGS_FOR_BUILD@
 LIBICONV = @LIBICONV@
 LIBINTL = @LIBINTL@
 LIBOBJS = @LIBOBJS@
@@ -203,7 +198,6 @@ LS = @LS@
 LTLIBICONV = @LTLIBICONV@
 LTLIBINTL = @LTLIBINTL@
 LTLIBOBJS = @LTLIBOBJS@
-LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKE = @MAKE@
 MAKEINFO = @MAKEINFO@
@@ -256,6 +250,7 @@ abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
+ac_ct_CC_FOR_BUILD = @ac_ct_CC_FOR_BUILD@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 acx_pthread_config = @acx_pthread_config@
 alpine_interactive_spellcheck = @alpine_interactive_spellcheck@
@@ -320,6 +315,7 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign web/src/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --foreign web/src/Makefile
+.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -493,8 +489,6 @@ uninstall-am:
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 	tags-am uninstall uninstall-am
 
-.PRECIOUS: Makefile
-
 
 all:
 	cd @abs_top_srcdir@/web/src/cgi.tcl-1.10 && ./configure --prefix=@abs_top_srcdir@/web/lib
diff --git a/web/src/alpined.d/Makefile b/web/src/alpined.d/Makefile
new file mode 100644
index 00000000..b8658755
--- /dev/null
+++ b/web/src/alpined.d/Makefile
@@ -0,0 +1,825 @@
+# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# web/src/alpined.d/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+# ========================================================================
+# Copyright 2006 University of Washington
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# ========================================================================
+
+
+
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/alpine
+pkgincludedir = $(includedir)/alpine
+pkglibdir = $(libdir)/alpine
+pkglibexecdir = $(libexecdir)/alpine
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-suse-linux-gnu
+host_triplet = x86_64-suse-linux-gnu
+locbin_PROGRAMS = alpined$(EXEEXT) alpineldap$(EXEEXT)
+subdir = web/src/alpined.d
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/mkinstalldirs $(top_srcdir)/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
+	$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
+	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/m4/m4_ax_prog_cc_for_build.m4 \
+	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/include/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(loclibdir)" "$(DESTDIR)$(locbindir)"
+LTLIBRARIES = $(loclib_LTLIBRARIES)
+libwpcomm_la_LIBADD =
+am_libwpcomm_la_OBJECTS = wpcomm.lo
+libwpcomm_la_OBJECTS = $(am_libwpcomm_la_OBJECTS)
+AM_V_lt = $(am__v_lt_$(V))
+am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+libwpcomm_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libwpcomm_la_LDFLAGS) $(LDFLAGS) -o $@
+PROGRAMS = $(locbin_PROGRAMS)
+am_alpined_OBJECTS = alpined.$(OBJEXT) busy.$(OBJEXT) color.$(OBJEXT) \
+	imap.$(OBJEXT) ldap.$(OBJEXT) remote.$(OBJEXT) \
+	signal.$(OBJEXT) debug.$(OBJEXT) status.$(OBJEXT) \
+	stubs.$(OBJEXT)
+alpined_OBJECTS = $(am_alpined_OBJECTS)
+am__DEPENDENCIES_1 =
+am__DEPENDENCIES_2 = local.o ../../../pith/libpith.a \
+	../../../pith/osdep/libpithosd.a \
+	../../../pith/charconv/libpithcc.a \
+	../../../c-client/c-client.a $(am__DEPENDENCIES_1)
+alpined_DEPENDENCIES = $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_1)
+am_alpineldap_OBJECTS = alpineldap.$(OBJEXT) busy.$(OBJEXT) \
+	color.$(OBJEXT) imap.$(OBJEXT) ldap.$(OBJEXT) remote.$(OBJEXT) \
+	signal.$(OBJEXT) debug.$(OBJEXT) status.$(OBJEXT) \
+	stubs.$(OBJEXT)
+alpineldap_OBJECTS = $(am_alpineldap_OBJECTS)
+alpineldap_DEPENDENCIES = $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_1)
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = 
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_$(V))
+am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_$(V))
+am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(libwpcomm_la_SOURCES) $(alpined_SOURCES) \
+	$(alpineldap_SOURCES)
+DIST_SOURCES = $(libwpcomm_la_SOURCES) $(alpined_SOURCES) \
+	$(alpineldap_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/missing aclocal-1.13
+ALPINE_DATESTAMP = Mon Dec  4 16:02:35 MST 2017
+ALPINE_HOSTSTAMP = jctgjb2
+AMTAR = $${TAR-tar}
+AM_CFLAGS =  -g -pthread
+AM_DEFAULT_VERBOSITY = 1
+AM_LDFLAGS = `cat ../../../c-client/LDFLAGS`
+AR = /usr/bin/ar
+AUTOCONF = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/missing autoconf
+AUTOHEADER = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/missing autoheader
+AUTOMAKE = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/missing automake-1.13
+AWK = gawk
+BUILD_EXEEXT = 
+BUILD_OBJEXT = 
+CC = gcc -std=gnu99
+CCDEPMODE = depmode=gcc3
+CC_FOR_BUILD = gcc
+CFLAGS = -g
+CFLAGS_FOR_BUILD = -g -O2
+CP = /usr/bin/cp
+CPP = gcc -E
+CPPFLAGS = -I/usr/include/openssl 
+CPPFLAGS_FOR_BUILD = 
+CPP_FOR_BUILD = gcc -E
+CYGPATH_W = echo
+C_CLIENT_AUTHS = gss 
+C_CLIENT_CFLAGS = EXTRACFLAGS=" -DTLSV1_2 -I/usr/include/openssl  -g"
+C_CLIENT_GCCOPTLEVEL = GCCOPTLEVEL="-O0"
+C_CLIENT_LDFLAGS = EXTRALDFLAGS=" -L/usr/lib   -ltcl8.6 -lgssapi_krb5 -lpam -lldap -lssl -lcrypto -ldl  -ltinfo -llber -lpam -lkrb5"
+C_CLIENT_SPECIALS = SSLINCLUDE=/usr/include/openssl SSLLIB=/usr/lib SSLDIR=/etc/ssl SSLCERTS=/etc/ssl/certs SSLKEYS=/etc/ssl/private 
+C_CLIENT_TARGET = lsu
+C_CLIENT_WITH_IPV6 = touch imap/ip6
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = false
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /usr/bin/grep -E
+EXEEXT = 
+FGREP = /usr/bin/grep -F
+GMSGFMT = /usr/bin/msgfmt
+GMSGFMT_015 = /usr/bin/msgfmt
+GREP = /usr/bin/grep
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INTLLIBS = 
+INTL_MACOSX_LIBS = 
+ISPELLPROG = hunspell
+LD = /usr/x86_64-suse-linux/bin/ld -m elf_x86_64
+LDFLAGS = -L/usr/lib 
+LDFLAGS_FOR_BUILD = 
+LIBICONV = -liconv
+LIBINTL = 
+LIBOBJS = 
+LIBS =  -ltcl8.6 -lgssapi_krb5 -lpam -lldap -lssl -lcrypto -ldl  -ltinfo -llber -lpam -lkrb5
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIBTOOL_DEPS = ./ltmain.sh
+LIPO = 
+LN = /usr/bin/ln
+LN_S = ln -s
+LS = /usr/bin/ls
+LTLIBICONV = -liconv
+LTLIBINTL = 
+LTLIBOBJS = 
+MAINT = #
+MAKE = /usr/bin/make
+MAKEINFO = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/missing makeinfo
+MANIFEST_TOOL = :
+MKDIR_P = /usr/bin/mkdir -p
+MSGFMT = /usr/bin/msgfmt
+MSGFMT_015 = /usr/bin/msgfmt
+MSGMERGE = /usr/bin/msgmerge
+NM = /usr/bin/nm -B
+NMEDIT = 
+NPA_PROG = 
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = alpine
+PACKAGE_BUGREPORT = chappa@washington.edu
+PACKAGE_NAME = alpine
+PACKAGE_STRING = alpine 2.21.9
+PACKAGE_TARNAME = alpine
+PACKAGE_URL = 
+PACKAGE_VERSION = 2.21.9
+PATH_SEPARATOR = :
+POSUB = po
+PTHREAD_CC = gcc -std=gnu99
+PTHREAD_CFLAGS = -pthread
+PTHREAD_LIBS = 
+PWPROG = /usr/bin/passwd
+RANLIB = ranlib
+REGEX_BUILD = 
+RM = /usr/bin/rm
+SED = /usr/bin/sed
+SENDMAIL = /usr/sbin/sendmail
+SET_MAKE = 
+SHELL = /bin/sh
+SPELLPROG = hunspell
+STRIP = strip
+USE_NLS = yes
+VERSION = 2.21.9
+WEB_BINDIR = 
+WEB_BUILD = 
+WEB_PUBCOOKIE_BUILD = 
+WEB_PUBCOOKIE_LIB = 
+WEB_PUBCOOKIE_LINK = 
+XGETTEXT = /usr/bin/xgettext
+XGETTEXT_015 = /usr/bin/xgettext
+abs_builddir = /run/media/chappa/Work/alpine/alpinegit/web/src/alpined.d
+abs_srcdir = /run/media/chappa/Work/alpine/alpinegit/web/src/alpined.d
+abs_top_builddir = /run/media/chappa/Work/alpine/alpinegit
+abs_top_srcdir = /run/media/chappa/Work/alpine/alpinegit
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CC_FOR_BUILD = gcc
+ac_ct_DUMPBIN = 
+acx_pthread_config = 
+alpine_interactive_spellcheck = /usr/bin/hunspell
+alpine_simple_spellcheck = /usr/bin/hunspell -l
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = $${TAR-tar} chof - "$$tardir"
+am__untar = $${TAR-tar} xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-suse-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = suse
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-suse-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = suse
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/install-sh
+libdir = ${exec_prefix}/lib64
+libexecdir = ${exec_prefix}/lib
+localedir = ${datadir}/locale
+localstatedir = ${prefix}/var
+mandir = ${datarootdir}/man
+mkdir_p = $(MKDIR_P)
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+prefix = /usr/local
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = ${prefix}/etc
+target_alias = 
+top_build_prefix = ../../../
+top_builddir = ../../..
+top_srcdir = ../../..
+
+# This is because alpined, libwpcomm and friends are
+# not intended for system-wide consumption
+locbindir = /run/media/chappa/Work/alpine/alpinegit/web/src/alpined.d/../../bin
+loclibdir = /run/media/chappa/Work/alpine/alpinegit/web/src/alpined.d/../../lib
+alpined_SOURCES = alpined.c busy.c color.c imap.c ldap.c remote.c \
+		  signal.c debug.c status.c stubs.c \
+		  alpined.h color.h ldap.h
+
+alpineldap_SOURCES = alpineldap.c busy.c color.c imap.c ldap.c remote.c \
+		   signal.c debug.c status.c stubs.c \
+		   alpined.h color.h ldap.h
+
+alpined_LDADD = $(LDADD) $(INTLLIBS)
+alpineldap_LDADD = $(LDADD) $(INTLLIBS)
+LDADD = local.o \
+	../../../pith/libpith.a \
+	../../../pith/osdep/libpithosd.a \
+	../../../pith/charconv/libpithcc.a \
+	../../../c-client/c-client.a \
+	$(WEB_PUBCOOKIE_LIB)
+
+loclib_LTLIBRARIES = libwpcomm.la
+libwpcomm_la_SOURCES = wpcomm.c
+libwpcomm_la_LDFLAGS = -rpath '$(loclibdir)' -version-info 1:0:0
+AM_CPPFLAGS = -I../../../include -I../../../include
+CLEANFILES = local.c
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign web/src/alpined.d/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign web/src/alpined.d/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: # $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+install-loclibLTLIBRARIES: $(loclib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	@list='$(loclib_LTLIBRARIES)'; test -n "$(loclibdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(loclibdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(loclibdir)" || exit 1; \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(loclibdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(loclibdir)"; \
+	}
+
+uninstall-loclibLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(loclib_LTLIBRARIES)'; test -n "$(loclibdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(loclibdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(loclibdir)/$$f"; \
+	done
+
+clean-loclibLTLIBRARIES:
+	-test -z "$(loclib_LTLIBRARIES)" || rm -f $(loclib_LTLIBRARIES)
+	@list='$(loclib_LTLIBRARIES)'; \
+	locs=`for p in $$list; do echo $$p; done | \
+	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+	      sort -u`; \
+	test -z "$$locs" || { \
+	  echo rm -f $${locs}; \
+	  rm -f $${locs}; \
+	}
+
+libwpcomm.la: $(libwpcomm_la_OBJECTS) $(libwpcomm_la_DEPENDENCIES) $(EXTRA_libwpcomm_la_DEPENDENCIES) 
+	$(AM_V_CCLD)$(libwpcomm_la_LINK) -rpath $(loclibdir) $(libwpcomm_la_OBJECTS) $(libwpcomm_la_LIBADD) $(LIBS)
+install-locbinPROGRAMS: $(locbin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(locbin_PROGRAMS)'; test -n "$(locbindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(locbindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(locbindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(locbindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(locbindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-locbinPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(locbin_PROGRAMS)'; test -n "$(locbindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(locbindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(locbindir)" && rm -f $$files
+
+clean-locbinPROGRAMS:
+	@list='$(locbin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+alpined$(EXEEXT): $(alpined_OBJECTS) $(alpined_DEPENDENCIES) $(EXTRA_alpined_DEPENDENCIES) 
+	@rm -f alpined$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(alpined_OBJECTS) $(alpined_LDADD) $(LIBS)
+
+alpineldap$(EXEEXT): $(alpineldap_OBJECTS) $(alpineldap_DEPENDENCIES) $(EXTRA_alpineldap_DEPENDENCIES) 
+	@rm -f alpineldap$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(alpineldap_OBJECTS) $(alpineldap_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+include ./$(DEPDIR)/alpined.Po
+include ./$(DEPDIR)/alpineldap.Po
+include ./$(DEPDIR)/busy.Po
+include ./$(DEPDIR)/color.Po
+include ./$(DEPDIR)/debug.Po
+include ./$(DEPDIR)/imap.Po
+include ./$(DEPDIR)/ldap.Po
+include ./$(DEPDIR)/remote.Po
+include ./$(DEPDIR)/signal.Po
+include ./$(DEPDIR)/status.Po
+include ./$(DEPDIR)/stubs.Po
+include ./$(DEPDIR)/wpcomm.Plo
+
+.c.o:
+	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CC)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(COMPILE) -c $<
+
+.c.obj:
+	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CC)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+#	$(AM_V_CC)source='$<' object='$@' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS)
+installdirs:
+	for dir in "$(DESTDIR)$(loclibdir)" "$(DESTDIR)$(locbindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-locbinPROGRAMS \
+	clean-loclibLTLIBRARIES mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-locbinPROGRAMS install-loclibLTLIBRARIES
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-locbinPROGRAMS uninstall-loclibLTLIBRARIES
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
+	clean-libtool clean-locbinPROGRAMS clean-loclibLTLIBRARIES \
+	cscopelist-am ctags ctags-am distclean distclean-compile \
+	distclean-generic distclean-libtool distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-locbinPROGRAMS \
+	install-loclibLTLIBRARIES install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-am uninstall uninstall-am uninstall-locbinPROGRAMS \
+	uninstall-loclibLTLIBRARIES
+
+
+local.c: alpineldap.c color.c imap.c ldap.c remote.c signal.c \
+	 debug.c status.c stubs.c alpined.h color.h ldap.h
+	echo "char datestamp[]="\"$(ALPINE_DATESTAMP)\"";" > local.c
+	echo "char hoststamp[]="\"$(ALPINE_HOSTSTAMP)\"";" >> local.c
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/web/src/alpined.d/Makefile.in b/web/src/alpined.d/Makefile.in
index 266a8569..95b64fec 100644
--- a/web/src/alpined.d/Makefile.in
+++ b/web/src/alpined.d/Makefile.in
@@ -101,6 +101,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
 	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
 	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/m4/m4_ax_prog_cc_for_build.m4 \
 	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
 	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
@@ -241,12 +242,18 @@ AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
 AWK = @AWK@
+BUILD_EXEEXT = @BUILD_EXEEXT@
+BUILD_OBJEXT = @BUILD_OBJEXT@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
+CC_FOR_BUILD = @CC_FOR_BUILD@
 CFLAGS = @CFLAGS@
+CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@
 CP = @CP@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
+CPPFLAGS_FOR_BUILD = @CPPFLAGS_FOR_BUILD@
+CPP_FOR_BUILD = @CPP_FOR_BUILD@
 CYGPATH_W = @CYGPATH_W@
 C_CLIENT_AUTHS = @C_CLIENT_AUTHS@
 C_CLIENT_CFLAGS = @C_CLIENT_CFLAGS@
@@ -279,6 +286,7 @@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
 ISPELLPROG = @ISPELLPROG@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
+LDFLAGS_FOR_BUILD = @LDFLAGS_FOR_BUILD@
 LIBICONV = @LIBICONV@
 LIBINTL = @LIBINTL@
 LIBOBJS = @LIBOBJS@
@@ -344,6 +352,7 @@ abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
+ac_ct_CC_FOR_BUILD = @ac_ct_CC_FOR_BUILD@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 acx_pthread_config = @acx_pthread_config@
 alpine_interactive_spellcheck = @alpine_interactive_spellcheck@
diff --git a/web/src/cgi.tcl-1.10/Makefile b/web/src/cgi.tcl-1.10/Makefile
new file mode 100644
index 00000000..fb48bf4c
--- /dev/null
+++ b/web/src/cgi.tcl-1.10/Makefile
@@ -0,0 +1,273 @@
+#
+# Makefile for Don Libes' cgi.tcl - routines for writing CGI scripts in Tcl
+#
+
+VERSION = \"1.10.0\"
+SHORT_VERSION = 1.10
+
+srcdir = .
+
+SUBDIRS = @subdirs@
+
+######################################################################
+# The following lines are things you may want to change
+######################################################################
+
+# By default, "make install" will install the appropriate files in
+# /usr/local/bin, /usr/local/lib, /usr/local/man, etc.  By changing this
+# variable, you can specify an installation prefix other than /usr/local.
+# You may find it preferable to call configure with the --prefix option
+# to control this information.  This is especially handy if you are
+# installing this several times (perhaps on a number of machines or
+# in different places).  Then you don't have to hand-edit this file.
+# See the INSTALL file for more information.  (Analogous information
+# applies to the next variable as well.)
+prefix = /run/media/chappa/Work/alpine/alpinegit/web/lib
+
+# You can specify a separate installation prefix for architecture-specific
+# files such as binaries and libraries.
+exec_prefix = ${prefix}
+
+# Short directory path where binaries can be found to support #! hack.
+# This directory path can be the same as the directory in which the binary
+# actually sits except when the path is so long that the #! mechanism breaks
+# (usually at 32 characters).
+# The solution is to create a directory with a very short name, which consists
+# only of symbolic links back to the true binaries.  Subtracting two for "#!"
+# and a couple more for arguments (typically " -f" or " --") gives you 27
+# characters.  Pathnames over this length won't be able to use the #! magic.
+# For more info on this, see the execve(2) man page.
+SHORT_BINDIR = $(exec_prefix)/bin
+
+# Tcl interpreter for utility work.
+CGI_TCL_EXECUTABLE = /usr/bin/tclsh
+
+# Where to put the examples - a directory in which your web server has
+# permission to execute CGI scripts.
+exampledir = /tmp/cgi-bin/cgi-tcl-examples
+
+######################################################################
+# End of things you may want to change
+#
+# Do not change anything after this
+######################################################################
+
+bindir_arch_indep = $(prefix)/bin
+libdir 	= $(exec_prefix)/lib
+datadir = $(prefix)/lib
+
+mandir 	= $(prefix)/man
+man1dir = $(mandir)/man1
+man3dir = $(mandir)/man3
+docdir = $(datadir)/doc
+
+# utility script directories - arch-independent and arch-non-
+# independent.
+SCRIPTDIR	= $(datadir)/cgi$(SHORT_VERSION)
+EXECSCRIPTDIR	= $(execdatadir)/cgi$(SHORT_VERSION)
+
+INSTALL = /usr/bin/install -c
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_DATA = ${INSTALL} -m 644
+
+# To install the following examples: make examples
+EXAMPLES=cookie.cgi creditcard.cgi \
+	display.cgi display-in-frame.cgi download.cgi \
+	echo.cgi error.cgi evaljs.cgi example.tcl examples.cgi \
+	form-tour.cgi form-tour-result.cgi format-tour.cgi frame.cgi \
+	image.cgi img.cgi kill.cgi nistguest.cgi oratcl.cgi \
+	parray.cgi passwd.tcl passwd-form.cgi passwd.cgi \
+	push.cgi rm.cgi stopwatch.cgi \
+	unimail.cgi upload.cgi uploadbin.cgi \
+	validate.cgi vclock.cgi vclock.pl vclock-src-frame.cgi visitor.cgi \
+	vote.cgi
+
+EXAMPLES_DATA=nistguest vote.cnt
+
+all: cgi.tcl pkgIndex.tcl
+
+info:
+dvi:
+
+# Delete all the installed files that the `install' target creates
+# (but not the noninstalled files such as `make all' creates)
+uninstall:
+	-rm -f $(SCRIPTDIR)/cgi.tcl
+	-rm -f $(man3dir)/cgi.tcl.3
+	-rm -f $(SCRIPTDIR)/pkgIndex.tcl
+
+.PHONY: install-info install info
+install-info:
+
+install: all
+	${srcdir}/mkinstalldirs $(man3dir) $(SCRIPTDIR) $(exampledir) $(exampledir)/data
+# install scripts
+	$(INSTALL_DATA) cgi.tcl $(SCRIPTDIR)
+# install library man page
+	$(INSTALL_DATA) cgi.tcl.man $(man3dir)/cgi.tcl.3
+	$(INSTALL_DATA) pkgIndex.tcl $(SCRIPTDIR)
+
+examples:
+	for i in $(EXAMPLES) ; do \
+	  $(CGI_TCL_EXECUTABLE) $(srcdir)/fixline1 $(SHORT_BINDIR) < $(srcdir)/example/$$i > $$i ; \
+	  $(INSTALL_PROGRAM) $$i $(exampledir) ; \
+	  rm -f $$i ; \
+	done
+	for i in $(EXAMPLES_DATA) ; do \
+	  $(INSTALL) -m 666 $(srcdir)/example/$$i $(exampledir)/data ; \
+	done
+
+cgi.tcl: $(srcdir)/cgi.tcl.in
+	@echo "Rebuilding cgi.tcl..."
+	$(SHELL) ./config.status
+
+###################################
+# Targets for Makefile and configure
+###################################
+
+Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) config.status
+	@echo "Rebuilding the Makefile..."
+	$(SHELL) ./config.status
+
+# Let "make -f Makefile.in" produce a configure file
+configure: $(srcdir)/configure.in $(srcdir)/Makefile.in
+	@echo "Rebuilding configure..."
+	if [ x"${srcdir}" = x"." ] ; then \
+	  srcdir=. ; export srcdir ; \
+	else true ; fi ; \
+	(cd $${srcdir}; autoconf)
+
+config.status: $(srcdir)/configure
+	@echo "Rebuilding config.status..."
+	$(SHELL) ./config.status --recheck
+
+check:
+	@if [ -f testsuite/Makefile ]; then \
+	   cd testsuite && $(MAKE) $(FLAGS_TO_PASS) check; \
+	else true; fi
+
+# updating of pkgIndex.tcl has not yet been totally automated
+# Instructions:
+# 1) Replace version # in cgi.tcl with updated version.
+#    (Gad, I'd have to turn the whole source into .in file to automate this
+#     and it'd be a major nuisance when developing!)
+pkgIndex.tcl: cgi.tcl
+	$(CGI_TCL_EXECUTABLE) pkgcreate
+
+################################################
+# Various "clean" targets follow GNU conventions
+################################################
+
+# delete all files from current directory that are created by "make"
+clean:
+	-rm -f *~ *.o core
+
+# like "clean", but also delete files created by "configure"
+distclean: clean
+	-rm -f Makefile config.status config.cache config.log
+	-rm -f Dbg_cf.h
+
+# like "clean", but doesn't delete test utilities or massaged scripts
+# because most people don't have to worry about them
+mostlyclean:
+	-rm -f *~ *.o core
+
+# delete everything from current directory that can be reconstructed
+# except for configure
+realclean:	distclean
+
+######################################
+# Targets for pushing out releases
+######################################
+
+FTPDIR = /itl/www/div826/subject/expect/cgi.tcl
+
+# make a private tar file for myself
+tar:	cgi.tcl-$(SHORT_VERSION).tar
+	mv cgi.tcl-$(SHORT_VERSION).tar cgi.tcl.tar
+
+# Make a release and install it on ftp server
+# Note that we run configure on our end to make sure that cgi.tcl is usable
+# for people who don't have configure at the destination end (non-UNIX folks).
+ftp:	cgi.tcl cgi.tcl-$(SHORT_VERSION).tar.Z cgi.tcl-$(SHORT_VERSION).tar.gz install-html
+	cp cgi.tcl-$(SHORT_VERSION).tar.Z $(FTPDIR)/cgi.tcl.tar.Z
+	cp cgi.tcl-$(SHORT_VERSION).tar.gz $(FTPDIR)/cgi.tcl.tar.gz
+	cp HISTORY $(FTPDIR)
+	cp README $(FTPDIR)/README.distribution
+	cp doc/ref.txt $(FTPDIR)
+	cp doc/ref.html $(FTPDIR)
+	cp example/README $(FTPDIR)/example
+	cp `pubfile example` $(FTPDIR)/example
+	ls -l $(FTPDIR)/cgi.tcl.tar*
+#	delete temp files
+	rm cgi.tcl-$(SHORT_VERSION).tar*
+
+cgi.tcl-$(SHORT_VERSION).tar: configure
+	rm -f ../cgi.tcl-$(SHORT_VERSION)
+	ln -s `pwd` ../cgi.tcl-$(SHORT_VERSION)
+	cd ..;tar cvfh $@ `pubfile cgi.tcl-$(SHORT_VERSION)`
+	mv ../$@ .
+
+cgi.tcl-$(SHORT_VERSION).tar.Z:	cgi.tcl-$(SHORT_VERSION).tar
+	compress -fc cgi.tcl-$(SHORT_VERSION).tar > $@
+
+cgi.tcl-$(SHORT_VERSION).tar.gz:	cgi.tcl-$(SHORT_VERSION).tar
+	gzip -fc cgi.tcl-$(SHORT_VERSION).tar > $@
+
+###########################
+# Targets for producing FAQ and homepage
+###########################
+
+NISTCGI_PREFIX = /local
+NISTCGI_HOST = ats.nist.gov
+NISTCGI_INTERPDIR = $(NISTCGI_PREFIX)/bin
+NISTCGI_LIBDIR = $(NISTCGI_PREFIX)/lib/cgi$(SHORT_VERSION)
+NISTCGI_EXAMPLEDIR = $(NISTCGI_HOST):/private/home/http/cgi-bin/cgi.tcl
+NISTCGI_HTMLDIR = /itl/www/div826/subject/expect/cgi.tcl
+
+# create the FAQ in html form
+FAQ.html:	FAQ.src FAQ.tcl
+	FAQ.src > FAQ.html
+
+# create the FAQ in text form
+#FAQ:	FAQ.src FAQ.tcl
+#	FAQ.src text > FAQ
+
+# generate home page
+homepage.html:	homepage.src common.tcl configure
+	homepage.src > homepage.html
+
+realapps.html:	realapps.src common.tcl
+	realapps.src > realapps.html
+
+RSH = ssh
+RCP = scp
+
+# install various html docs on our web server
+install-html:	FAQ.html homepage.html realapps.html pkgIndex.tcl cgi.tcl
+	cp FAQ.html $(NISTCGI_HTMLDIR)/
+	cp homepage.html $(NISTCGI_HTMLDIR)/index.html
+	cp realapps.html $(NISTCGI_HTMLDIR)/
+	-$(RSH) $(NISTCGI_HOST) mkdir $(NISTCGI_LIBDIR)/
+	$(RCP) cgi.tcl pkgIndex.tcl $(NISTCGI_HOST):$(NISTCGI_LIBDIR)/
+	for i in $(EXAMPLES) ; do \
+	  $(CGI_TCL_EXECUTABLE) $(srcdir)/fixline1 $(NISTCGI_INTERPDIR) < $(srcdir)/example/$$i > $$i ; \
+	  $(RCP) $$i $(NISTCGI_EXAMPLEDIR)/ ; \
+	  rm -f $$i ; \
+	done
+
+# add recursive support to the build process.
+subdir_do: force
+	@for i in $(SUBDIRS); do \
+	   echo "Making $(DO) in $${i}..." ; \
+	   if [ -d ./$$i ] ; then \
+	     if (rootme=`pwd`/ ; export rootme ; \
+	       rootsrc=`cd $(srcdir); pwd`/ ; export rootsrc ; \
+	       cd ./$$i; \
+	       $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
+	     else exit 1 ; fi ; \
+	   else true ; fi ; \
+	done
+force:
+
+## dependencies will be put after this line... ##
diff --git a/web/src/cgi.tcl-1.10/config.status b/web/src/cgi.tcl-1.10/config.status
new file mode 100755
index 00000000..5c75c893
--- /dev/null
+++ b/web/src/cgi.tcl-1.10/config.status
@@ -0,0 +1,716 @@
+#! /bin/sh
+# Generated by configure.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=${CONFIG_SHELL-/bin/sh}
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+  LC_TELEPHONE LC_TIME
+do
+  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+    eval $as_var=C; export $as_var
+  else
+    $as_unset $as_var
+  fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)$' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\/\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
+  # Find who we are.  Look in the path if we contain no path at all
+  # relative or not.
+  case $0 in
+    *[\\/]* ) as_myself=$0 ;;
+    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+       ;;
+  esac
+  # We did not find ourselves, most probably we were run as `sh COMMAND'
+  # in which case we are not to be found in the path.
+  if test "x$as_myself" = x; then
+    as_myself=$0
+  fi
+  if test ! -f "$as_myself"; then
+    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
+   { (exit 1); exit 1; }; }
+  fi
+  case $CONFIG_SHELL in
+  '')
+    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for as_base in sh bash ksh sh5; do
+	 case $as_dir in
+	 /*)
+	   if ("$as_dir/$as_base" -c '
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
+	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+	     CONFIG_SHELL=$as_dir/$as_base
+	     export CONFIG_SHELL
+	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+	   fi;;
+	 esac
+       done
+done
+;;
+  esac
+
+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line before each line; the second 'sed' does the real
+  # work.  The second script uses 'N' to pair each line-number line
+  # with the numbered line, and appends trailing '-' during
+  # substitution so that $LINENO is not a special case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
+  sed '=' <$as_myself |
+    sed '
+      N
+      s,$,-,
+      : loop
+      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      t loop
+      s,-$,,
+      s,^['$as_cr_digits']*\n,,
+    ' >$as_me.lineno &&
+  chmod +x $as_me.lineno ||
+    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensible to this).
+  . ./$as_me.lineno
+  # Exit status is that of the last command.
+  exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+  *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T='	' ;;
+  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+  # We could just check for DJGPP; but this test a) works b) is more generic
+  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+  if test -f conf$$.exe; then
+    # Don't use ln at all; we don't have any links
+    as_ln_s='cp -p'
+  else
+    as_ln_s='ln -s'
+  fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s=ln
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" 	$as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+exec 6>&1
+
+# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.  Logging --version etc. is OK.
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+} >&5
+cat >&5 <<_CSEOF
+
+This file was extended by $as_me, which was
+generated by GNU Autoconf 2.59.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+_CSEOF
+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
+echo >&5
+config_files=" Makefile cgi.tcl version"
+
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number, then exit
+  -q, --quiet      do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+  --file=FILE[:TEMPLATE]
+		   instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Report bugs to <bug-autoconf@gnu.org>."
+ac_cs_version="\
+config.status
+configured by ./configure, generated by GNU Autoconf 2.59,
+  with options \"'--prefix=/run/media/chappa/Work/alpine/alpinegit/web/lib'\"
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+srcdir=.
+INSTALL="/usr/bin/install -c"
+# If no file are specified by the user, then we need to provide default
+# value.  By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=*)
+    ac_option=`expr "x$1" : 'x\([^=]*\)='`
+    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  -*)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  *) # This is not an option, so the user has probably given explicit
+     # arguments.
+     ac_option=$1
+     ac_need_defaults=false;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --vers* | -V )
+    echo "$ac_cs_version"; exit 0 ;;
+  --he | --h)
+    # Conflict between --help and --header
+    { { echo "$as_me:$LINENO: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2;}
+   { (exit 1); exit 1; }; };;
+  --help | --hel | -h )
+    echo "$ac_cs_usage"; exit 0 ;;
+  --debug | --d* | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+    ac_need_defaults=false;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2;}
+   { (exit 1); exit 1; }; } ;;
+
+  *) ac_config_targets="$ac_config_targets $1" ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+if $ac_cs_recheck; then
+  echo "running /bin/sh ./configure " '--prefix=/run/media/chappa/Work/alpine/alpinegit/web/lib' $ac_configure_extra_args " --no-create --no-recursion" >&6
+  exec /bin/sh ./configure '--prefix=/run/media/chappa/Work/alpine/alpinegit/web/lib' $ac_configure_extra_args --no-create --no-recursion
+fi
+
+for ac_config_target in $ac_config_targets
+do
+  case "$ac_config_target" in
+  # Handling of arguments.
+  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+  "cgi.tcl" ) CONFIG_FILES="$CONFIG_FILES cgi.tcl" ;;
+  "version" ) CONFIG_FILES="$CONFIG_FILES version" ;;
+  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason to put it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+  trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+  test -n "$tmp" && test -d "$tmp"
+}  ||
+{
+  tmp=./confstat$$-$RANDOM
+  (umask 077 && mkdir $tmp)
+} ||
+{
+   echo "$me: cannot create a temporary directory in ." >&2
+   { (exit 1); exit 1; }
+}
+
+
+#
+# CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "$CONFIG_FILES"; then
+  # Protect against being on the right side of a sed subst in config.status.
+  sed 's/,@/@@/; s/@,/@@/; s/,;t t$/@;t t/; /@;t t$/s/[\\&,]/\\&/g;
+   s/@@/,@/; s/@@/@,/; s/@;t t$/,;t t/' >$tmp/subs.sed <<\CEOF
+s,@SHELL@,/bin/sh,;t t
+s,@PATH_SEPARATOR@,:,;t t
+s,@PACKAGE_NAME@,,;t t
+s,@PACKAGE_TARNAME@,,;t t
+s,@PACKAGE_VERSION@,,;t t
+s,@PACKAGE_STRING@,,;t t
+s,@PACKAGE_BUGREPORT@,,;t t
+s,@exec_prefix@,${prefix},;t t
+s,@prefix@,/run/media/chappa/Work/alpine/alpinegit/web/lib,;t t
+s,@program_transform_name@,s,x,x,,;t t
+s,@bindir@,${exec_prefix}/bin,;t t
+s,@sbindir@,${exec_prefix}/sbin,;t t
+s,@libexecdir@,${exec_prefix}/libexec,;t t
+s,@datadir@,${prefix}/share,;t t
+s,@sysconfdir@,${prefix}/etc,;t t
+s,@sharedstatedir@,${prefix}/com,;t t
+s,@localstatedir@,${prefix}/var,;t t
+s,@libdir@,${exec_prefix}/lib,;t t
+s,@includedir@,${prefix}/include,;t t
+s,@oldincludedir@,/usr/include,;t t
+s,@infodir@,${prefix}/info,;t t
+s,@mandir@,${prefix}/man,;t t
+s,@build_alias@,,;t t
+s,@host_alias@,,;t t
+s,@target_alias@,,;t t
+s,@DEFS@,-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" ,;t t
+s,@ECHO_C@,,;t t
+s,@ECHO_N@,-n,;t t
+s,@ECHO_T@,,;t t
+s,@LIBS@,,;t t
+s,@INSTALL_PROGRAM@,${INSTALL},;t t
+s,@INSTALL_SCRIPT@,${INSTALL},;t t
+s,@INSTALL_DATA@,${INSTALL} -m 644,;t t
+s,@CGI_MAJOR_VERSION@,1,;t t
+s,@CGI_MINOR_VERSION@,10,;t t
+s,@CGI_MICRO_VERSION@,0,;t t
+s,@CGI_VERSION_FULL@,1.10.0,;t t
+s,@CGI_VERSION@,1.10,;t t
+s,@CGI_LIB_FILE@,,;t t
+s,@CGI_LIB_FILES@,,;t t
+s,@CGI_TCL_EXECUTABLE@,/usr/bin/tclsh,;t t
+s,@LIBOBJS@,,;t t
+s,@LTLIBOBJS@,,;t t
+CEOF
+
+  # Split the substitutions into bite-sized pieces for seds with
+  # small command number limits, like on Digital OSF/1 and HP-UX.
+  ac_max_sed_lines=48
+  ac_sed_frag=1 # Number of current file.
+  ac_beg=1 # First line for current file.
+  ac_end=$ac_max_sed_lines # Line after last line for current file.
+  ac_more_lines=:
+  ac_sed_cmds=
+  while $ac_more_lines; do
+    if test $ac_beg -gt 1; then
+      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+    else
+      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+    fi
+    if test ! -s $tmp/subs.frag; then
+      ac_more_lines=false
+    else
+      # The purpose of the label and of the branching condition is to
+      # speed up the sed processing (if there are no `@' at all, there
+      # is no need to browse any of the substitutions).
+      # These are the two extra sed commands mentioned above.
+      (echo ':t
+  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
+      if test -z "$ac_sed_cmds"; then
+	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+      else
+	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+      fi
+      ac_sed_frag=`expr $ac_sed_frag + 1`
+      ac_beg=$ac_end
+      ac_end=`expr $ac_end + $ac_max_sed_lines`
+    fi
+  done
+  if test -z "$ac_sed_cmds"; then
+    ac_sed_cmds=cat
+  fi
+fi # test -n "$CONFIG_FILES"
+
+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case $ac_file in
+  - | *:- | *:-:* ) # input from stdin
+	cat >$tmp/stdin
+	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  * )   ac_file_in=$ac_file.in ;;
+  esac
+
+  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  { if $as_mkdir_p; then
+    mkdir -p "$ac_dir"
+  else
+    as_dir="$ac_dir"
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+   { (exit 1); exit 1; }; }; }
+
+  ac_builddir=.
+
+if test "$ac_dir" != .; then
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A "../" for each directory in $ac_dir_suffix.
+  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+  ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+  .)  # No --srcdir option.  We are building in place.
+    ac_srcdir=.
+    if test -z "$ac_top_builddir"; then
+       ac_top_srcdir=.
+    else
+       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+    fi ;;
+  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir ;;
+  *) # Relative path.
+    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+  case "$ac_dir" in
+  .) ac_abs_builddir=`pwd`;;
+  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+  *) ac_abs_builddir=`pwd`/"$ac_dir";;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+  case ${ac_top_builddir}. in
+  .) ac_abs_top_builddir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+  case $ac_srcdir in
+  .) ac_abs_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+  case $ac_top_srcdir in
+  .) ac_abs_top_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+  esac;;
+esac
+
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+  esac
+
+  if test x"$ac_file" != x-; then
+    { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+    rm -f "$ac_file"
+  fi
+  # Let's still pretend it is `configure' which instantiates (i.e., don't
+  # use $as_me), people would be surprised to read:
+  #    /* config.h.  Generated by config.status.  */
+  if test x"$ac_file" = x-; then
+    configure_input=
+  else
+    configure_input="$ac_file.  "
+  fi
+  configure_input=$configure_input"Generated from `echo $ac_file_in |
+				     sed 's,.*/,,'` by configure."
+
+  # First look for the input files in the build tree, otherwise in the
+  # src tree.
+  ac_file_inputs=`IFS=:
+    for f in $ac_file_in; do
+      case $f in
+      -) echo $tmp/stdin ;;
+      [\\/$]*)
+	 # Absolute (can't be DOS-style, as IFS=:)
+	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+	 echo "$f";;
+      *) # Relative
+	 if test -f "$f"; then
+	   # Build tree
+	   echo "$f"
+	 elif test -f "$srcdir/$f"; then
+	   # Source tree
+	   echo "$srcdir/$f"
+	 else
+	   # /dev/null tree
+	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+	 fi;;
+      esac
+    done` || { (exit 1); exit 1; }
+  sed "/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:*@srcdir@:*/:/;
+s/^\([^=]*=[	 ]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[	 ]*$//;
+}
+
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s,@configure_input@,$configure_input,;t t
+s,@srcdir@,$ac_srcdir,;t t
+s,@abs_srcdir@,$ac_abs_srcdir,;t t
+s,@top_srcdir@,$ac_top_srcdir,;t t
+s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
+s,@builddir@,$ac_builddir,;t t
+s,@abs_builddir@,$ac_abs_builddir,;t t
+s,@top_builddir@,$ac_top_builddir,;t t
+s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
+s,@INSTALL@,$ac_INSTALL,;t t
+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
+  rm -f $tmp/stdin
+  if test x"$ac_file" != x-; then
+    mv $tmp/out $ac_file
+  else
+    cat $tmp/out
+    rm -f $tmp/out
+  fi
+
+done
+
+{ (exit 0); exit 0; }
diff --git a/web/src/pubcookie/Makefile b/web/src/pubcookie/Makefile
new file mode 100644
index 00000000..362d86e1
--- /dev/null
+++ b/web/src/pubcookie/Makefile
@@ -0,0 +1,750 @@
+# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# web/src/pubcookie/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+# ========================================================================
+# Copyright 2006-2008 University of Washington
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# ========================================================================
+
+
+
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/alpine
+pkgincludedir = $(includedir)/alpine
+pkglibdir = $(libdir)/alpine
+pkglibexecdir = $(libexecdir)/alpine
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-suse-linux-gnu
+host_triplet = x86_64-suse-linux-gnu
+bin_PROGRAMS = wp_uidmapper$(EXEEXT) wp_tclsh$(EXEEXT) \
+	wp_gssapi_proxy$(EXEEXT) wp_umc$(EXEEXT)
+subdir = web/src/pubcookie
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/mkinstalldirs $(top_srcdir)/depcomp INSTALL \
+	README
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
+	$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
+	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/m4/m4_ax_prog_cc_for_build.m4 \
+	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/include/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+ARFLAGS = cru
+AM_V_AR = $(am__v_AR_$(V))
+am__v_AR_ = $(am__v_AR_$(AM_DEFAULT_VERBOSITY))
+am__v_AR_0 = @echo "  AR      " $@;
+am__v_AR_1 = 
+libauthgssproxy_a_AR = $(AR) $(ARFLAGS)
+libauthgssproxy_a_LIBADD =
+am_libauthgssproxy_a_OBJECTS = auth_gss_proxy.$(OBJEXT)
+libauthgssproxy_a_OBJECTS = $(am_libauthgssproxy_a_OBJECTS)
+am__installdirs = "$(DESTDIR)$(bindir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_wp_gssapi_proxy_OBJECTS = wp_gssapi_proxy.$(OBJEXT) \
+	wp_uidmapper_lib.$(OBJEXT)
+wp_gssapi_proxy_OBJECTS = $(am_wp_gssapi_proxy_OBJECTS)
+wp_gssapi_proxy_LDADD = $(LDADD)
+AM_V_lt = $(am__v_lt_$(V))
+am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+am_wp_tclsh_OBJECTS = wp_tclsh.$(OBJEXT) wp_uidmapper_lib.$(OBJEXT)
+wp_tclsh_OBJECTS = $(am_wp_tclsh_OBJECTS)
+wp_tclsh_LDADD = $(LDADD)
+am_wp_uidmapper_OBJECTS = wp_uidmapper.$(OBJEXT) id_table.$(OBJEXT)
+wp_uidmapper_OBJECTS = $(am_wp_uidmapper_OBJECTS)
+wp_uidmapper_LDADD = $(LDADD)
+am_wp_umc_OBJECTS = wp_umc.$(OBJEXT) wp_uidmapper_lib.$(OBJEXT)
+wp_umc_OBJECTS = $(am_wp_umc_OBJECTS)
+wp_umc_LDADD = $(LDADD)
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = 
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_$(V))
+am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_$(V))
+am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(libauthgssproxy_a_SOURCES) $(wp_gssapi_proxy_SOURCES) \
+	$(wp_tclsh_SOURCES) $(wp_uidmapper_SOURCES) $(wp_umc_SOURCES)
+DIST_SOURCES = $(libauthgssproxy_a_SOURCES) $(wp_gssapi_proxy_SOURCES) \
+	$(wp_tclsh_SOURCES) $(wp_uidmapper_SOURCES) $(wp_umc_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/missing aclocal-1.13
+ALPINE_DATESTAMP = Mon Dec  4 16:02:35 MST 2017
+ALPINE_HOSTSTAMP = jctgjb2
+AMTAR = $${TAR-tar}
+AM_CFLAGS =  -g -pthread
+AM_DEFAULT_VERBOSITY = 1
+AM_LDFLAGS = 
+AR = /usr/bin/ar
+AUTOCONF = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/missing autoconf
+AUTOHEADER = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/missing autoheader
+AUTOMAKE = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/missing automake-1.13
+AWK = gawk
+BUILD_EXEEXT = 
+BUILD_OBJEXT = 
+CC = gcc -std=gnu99
+CCDEPMODE = depmode=gcc3
+CC_FOR_BUILD = gcc
+CFLAGS = '-DWP_UIDMAPPER_SOCKET=$(WP_UIDMAPPER_SOCKET)' \
+         '-DWEBSERVER_UID=$(WEBSERVER_UID)' \
+         '-DAUTH_GSS_PROXY_PATH="$(WEB_BINDIR)/wp_gssapi_proxy"'
+
+CFLAGS_FOR_BUILD = -g -O2
+CP = /usr/bin/cp
+CPP = gcc -E
+CPPFLAGS = -I/usr/include/openssl 
+CPPFLAGS_FOR_BUILD = 
+CPP_FOR_BUILD = gcc -E
+CYGPATH_W = echo
+C_CLIENT_AUTHS = gss 
+C_CLIENT_CFLAGS = EXTRACFLAGS=" -DTLSV1_2 -I/usr/include/openssl  -g"
+C_CLIENT_GCCOPTLEVEL = GCCOPTLEVEL="-O0"
+C_CLIENT_LDFLAGS = EXTRALDFLAGS=" -L/usr/lib   -ltcl8.6 -lgssapi_krb5 -lpam -lldap -lssl -lcrypto -ldl  -ltinfo -llber -lpam -lkrb5"
+C_CLIENT_SPECIALS = SSLINCLUDE=/usr/include/openssl SSLLIB=/usr/lib SSLDIR=/etc/ssl SSLCERTS=/etc/ssl/certs SSLKEYS=/etc/ssl/private 
+C_CLIENT_TARGET = lsu
+C_CLIENT_WITH_IPV6 = touch imap/ip6
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = false
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /usr/bin/grep -E
+EXEEXT = 
+FGREP = /usr/bin/grep -F
+GMSGFMT = /usr/bin/msgfmt
+GMSGFMT_015 = /usr/bin/msgfmt
+GREP = /usr/bin/grep
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INTLLIBS = 
+INTL_MACOSX_LIBS = 
+ISPELLPROG = hunspell
+LD = /usr/x86_64-suse-linux/bin/ld -m elf_x86_64
+LDFLAGS = -L/usr/lib 
+LDFLAGS_FOR_BUILD = 
+LIBICONV = -liconv
+LIBINTL = 
+LIBOBJS = 
+LIBS =  -ltcl8.6 -lgssapi_krb5 -lpam -lldap -lssl -lcrypto -ldl  -ltinfo -llber -lpam -lkrb5
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIBTOOL_DEPS = ./ltmain.sh
+LIPO = 
+LN = /usr/bin/ln
+LN_S = ln -s
+LS = /usr/bin/ls
+LTLIBICONV = -liconv
+LTLIBINTL = 
+LTLIBOBJS = 
+MAINT = #
+MAKE = /usr/bin/make
+MAKEINFO = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/missing makeinfo
+MANIFEST_TOOL = :
+MKDIR_P = /usr/bin/mkdir -p
+MSGFMT = /usr/bin/msgfmt
+MSGFMT_015 = /usr/bin/msgfmt
+MSGMERGE = /usr/bin/msgmerge
+NM = /usr/bin/nm -B
+NMEDIT = 
+NPA_PROG = 
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = alpine
+PACKAGE_BUGREPORT = chappa@washington.edu
+PACKAGE_NAME = alpine
+PACKAGE_STRING = alpine 2.21.9
+PACKAGE_TARNAME = alpine
+PACKAGE_URL = 
+PACKAGE_VERSION = 2.21.9
+PATH_SEPARATOR = :
+POSUB = po
+PTHREAD_CC = gcc -std=gnu99
+PTHREAD_CFLAGS = -pthread
+PTHREAD_LIBS = 
+PWPROG = /usr/bin/passwd
+RANLIB = ranlib
+REGEX_BUILD = 
+RM = /usr/bin/rm
+SED = /usr/bin/sed
+SENDMAIL = /usr/sbin/sendmail
+SET_MAKE = 
+SHELL = /bin/sh
+SPELLPROG = hunspell
+STRIP = strip
+USE_NLS = yes
+VERSION = 2.21.9
+WEB_BINDIR = 
+WEB_BUILD = 
+WEB_PUBCOOKIE_BUILD = 
+WEB_PUBCOOKIE_LIB = 
+WEB_PUBCOOKIE_LINK = 
+XGETTEXT = /usr/bin/xgettext
+XGETTEXT_015 = /usr/bin/xgettext
+abs_builddir = /run/media/chappa/Work/alpine/alpinegit/web/src/pubcookie
+abs_srcdir = /run/media/chappa/Work/alpine/alpinegit/web/src/pubcookie
+abs_top_builddir = /run/media/chappa/Work/alpine/alpinegit
+abs_top_srcdir = /run/media/chappa/Work/alpine/alpinegit
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CC_FOR_BUILD = gcc
+ac_ct_DUMPBIN = 
+acx_pthread_config = 
+alpine_interactive_spellcheck = /usr/bin/hunspell
+alpine_simple_spellcheck = /usr/bin/hunspell -l
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = $${TAR-tar} chof - "$$tardir"
+am__untar = $${TAR-tar} xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-suse-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = suse
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-suse-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = suse
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /run/media/chappa/Work/alpine/alpinegit/install-sh
+libdir = ${exec_prefix}/lib64
+libexecdir = ${exec_prefix}/lib
+localedir = ${datadir}/locale
+localstatedir = ${prefix}/var
+mandir = ${datarootdir}/man
+mkdir_p = $(MKDIR_P)
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+prefix = /usr/local
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = ${prefix}/etc
+target_alias = 
+top_build_prefix = ../../../
+top_builddir = ../../..
+top_srcdir = ../../..
+WP_UIDMAPPER_SOCKET = "/tmp/wp_uidmapper"
+WEBSERVER_UID = 65534
+noinst_LIBRARIES = libauthgssproxy.a
+libauthgssproxy_a_SOURCES = auth_gss_proxy.c
+wp_uidmapper_SOURCES = wp_uidmapper.c id_table.c id_table.h 
+wp_tclsh_SOURCES = wp_tclsh.c wp_uidmapper_lib.c
+wp_gssapi_proxy_SOURCES = wp_gssapi_proxy.c wp_uidmapper_lib.c
+wp_umc_SOURCES = wp_umc.c wp_uidmapper_lib.c
+AM_CPPFLAGS = -I../../../include -I../../../include
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign web/src/pubcookie/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign web/src/pubcookie/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: # $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+clean-noinstLIBRARIES:
+	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+
+libauthgssproxy.a: $(libauthgssproxy_a_OBJECTS) $(libauthgssproxy_a_DEPENDENCIES) $(EXTRA_libauthgssproxy_a_DEPENDENCIES) 
+	$(AM_V_at)-rm -f libauthgssproxy.a
+	$(AM_V_AR)$(libauthgssproxy_a_AR) libauthgssproxy.a $(libauthgssproxy_a_OBJECTS) $(libauthgssproxy_a_LIBADD)
+	$(AM_V_at)$(RANLIB) libauthgssproxy.a
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+wp_gssapi_proxy$(EXEEXT): $(wp_gssapi_proxy_OBJECTS) $(wp_gssapi_proxy_DEPENDENCIES) $(EXTRA_wp_gssapi_proxy_DEPENDENCIES) 
+	@rm -f wp_gssapi_proxy$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(wp_gssapi_proxy_OBJECTS) $(wp_gssapi_proxy_LDADD) $(LIBS)
+
+wp_tclsh$(EXEEXT): $(wp_tclsh_OBJECTS) $(wp_tclsh_DEPENDENCIES) $(EXTRA_wp_tclsh_DEPENDENCIES) 
+	@rm -f wp_tclsh$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(wp_tclsh_OBJECTS) $(wp_tclsh_LDADD) $(LIBS)
+
+wp_uidmapper$(EXEEXT): $(wp_uidmapper_OBJECTS) $(wp_uidmapper_DEPENDENCIES) $(EXTRA_wp_uidmapper_DEPENDENCIES) 
+	@rm -f wp_uidmapper$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(wp_uidmapper_OBJECTS) $(wp_uidmapper_LDADD) $(LIBS)
+
+wp_umc$(EXEEXT): $(wp_umc_OBJECTS) $(wp_umc_DEPENDENCIES) $(EXTRA_wp_umc_DEPENDENCIES) 
+	@rm -f wp_umc$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(wp_umc_OBJECTS) $(wp_umc_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+include ./$(DEPDIR)/auth_gss_proxy.Po
+include ./$(DEPDIR)/id_table.Po
+include ./$(DEPDIR)/wp_gssapi_proxy.Po
+include ./$(DEPDIR)/wp_tclsh.Po
+include ./$(DEPDIR)/wp_uidmapper.Po
+include ./$(DEPDIR)/wp_uidmapper_lib.Po
+include ./$(DEPDIR)/wp_umc.Po
+
+.c.o:
+	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CC)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(COMPILE) -c $<
+
+.c.obj:
+	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CC)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+#	$(AM_V_CC)source='$<' object='$@' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LIBRARIES) $(PROGRAMS)
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libtool \
+	clean-noinstLIBRARIES mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean \
+	clean-binPROGRAMS clean-generic clean-libtool \
+	clean-noinstLIBRARIES cscopelist-am ctags ctags-am distclean \
+	distclean-compile distclean-generic distclean-libtool \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
+	install install-am install-binPROGRAMS install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-am uninstall uninstall-am uninstall-binPROGRAMS
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/web/src/pubcookie/Makefile.in b/web/src/pubcookie/Makefile.in
index 03c775b8..322b84bf 100644
--- a/web/src/pubcookie/Makefile.in
+++ b/web/src/pubcookie/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
+# Makefile.in generated by automake 1.13.4 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -27,17 +27,7 @@
 
 
 VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -103,6 +93,9 @@ host_triplet = @host@
 bin_PROGRAMS = wp_uidmapper$(EXEEXT) wp_tclsh$(EXEEXT) \
 	wp_gssapi_proxy$(EXEEXT) wp_umc$(EXEEXT)
 subdir = web/src/pubcookie
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/mkinstalldirs $(top_srcdir)/depcomp INSTALL \
+	README
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
 	$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \
@@ -110,17 +103,11 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
 	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
 	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/m4/m4_ax_prog_cc_for_build.m4 \
 	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
-	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/VERSION \
-	$(top_srcdir)/VERSION $(top_srcdir)/VERSION \
-	$(top_srcdir)/VERSION $(top_srcdir)/VERSION \
-	$(top_srcdir)/VERSION $(top_srcdir)/VERSION \
-	$(top_srcdir)/VERSION $(top_srcdir)/VERSION \
-	$(top_srcdir)/VERSION $(top_srcdir)/VERSION \
-	$(top_srcdir)/configure.ac
+	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
 CONFIG_HEADER = $(top_builddir)/include/config.h
 CONFIG_CLEAN_FILES =
@@ -216,10 +203,10 @@ am__define_uniq_tagged_files = \
   done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
-am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp \
-	$(top_srcdir)/mkinstalldirs INSTALL README
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
+ALPINE_DATESTAMP = @ALPINE_DATESTAMP@
+ALPINE_HOSTSTAMP = @ALPINE_HOSTSTAMP@
 AMTAR = @AMTAR@
 AM_CFLAGS = @AM_CFLAGS@
 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
@@ -229,16 +216,23 @@ AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
 AWK = @AWK@
+BUILD_EXEEXT = @BUILD_EXEEXT@
+BUILD_OBJEXT = @BUILD_OBJEXT@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
+CC_FOR_BUILD = @CC_FOR_BUILD@
 CFLAGS = '-DWP_UIDMAPPER_SOCKET=$(WP_UIDMAPPER_SOCKET)' \
          '-DWEBSERVER_UID=$(WEBSERVER_UID)' \
          '-DAUTH_GSS_PROXY_PATH="$(WEB_BINDIR)/wp_gssapi_proxy"'
 
+CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@
 CP = @CP@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
+CPPFLAGS_FOR_BUILD = @CPPFLAGS_FOR_BUILD@
+CPP_FOR_BUILD = @CPP_FOR_BUILD@
 CYGPATH_W = @CYGPATH_W@
+C_CLIENT_AUTHS = @C_CLIENT_AUTHS@
 C_CLIENT_CFLAGS = @C_CLIENT_CFLAGS@
 C_CLIENT_GCCOPTLEVEL = @C_CLIENT_GCCOPTLEVEL@
 C_CLIENT_LDFLAGS = @C_CLIENT_LDFLAGS@
@@ -269,6 +263,7 @@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
 ISPELLPROG = @ISPELLPROG@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
+LDFLAGS_FOR_BUILD = @LDFLAGS_FOR_BUILD@
 LIBICONV = @LIBICONV@
 LIBINTL = @LIBINTL@
 LIBOBJS = @LIBOBJS@
@@ -282,7 +277,6 @@ LS = @LS@
 LTLIBICONV = @LTLIBICONV@
 LTLIBINTL = @LTLIBINTL@
 LTLIBOBJS = @LTLIBOBJS@
-LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKE = @MAKE@
 MAKEINFO = @MAKEINFO@
@@ -335,6 +329,7 @@ abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
+ac_ct_CC_FOR_BUILD = @ac_ct_CC_FOR_BUILD@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 acx_pthread_config = @acx_pthread_config@
 alpine_interactive_spellcheck = @alpine_interactive_spellcheck@
@@ -409,6 +404,7 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign web/src/pubcookie/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --foreign web/src/pubcookie/Makefile
+.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -519,14 +515,14 @@ distclean-compile:
 @am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
 @am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@@ -748,8 +744,6 @@ uninstall-am: uninstall-binPROGRAMS
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 	tags tags-am uninstall uninstall-am uninstall-binPROGRAMS
 
-.PRECIOUS: Makefile
-
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.