* New version 2.21.99

   * The online repo does not mimic the root local directory
     from which it is created. This is an attempt to fix this.
     This caused the problem that kerberos was not working
     with the bytes on the repo, but it would work on the root
     which created it. Reported by Holger Trapp.

1 files changed, 273 insertions, 0 deletions

diff --git a/web/src/cgi.tcl-1.10/Makefile b/web/src/cgi.tcl-1.10/Makefile
new file mode 100644
index 00000000..fb48bf4c
--- /dev/null
+++ b/web/src/cgi.tcl-1.10/Makefile
@@ -0,0 +1,273 @@
+#
+# Makefile for Don Libes' cgi.tcl - routines for writing CGI scripts in Tcl
+#
+
+VERSION = \"1.10.0\"
+SHORT_VERSION = 1.10
+
+srcdir = .
+
+SUBDIRS = @subdirs@
+
+######################################################################
+# The following lines are things you may want to change
+######################################################################
+
+# By default, "make install" will install the appropriate files in
+# /usr/local/bin, /usr/local/lib, /usr/local/man, etc.  By changing this
+# variable, you can specify an installation prefix other than /usr/local.
+# You may find it preferable to call configure with the --prefix option
+# to control this information.  This is especially handy if you are
+# installing this several times (perhaps on a number of machines or
+# in different places).  Then you don't have to hand-edit this file.
+# See the INSTALL file for more information.  (Analogous information
+# applies to the next variable as well.)
+prefix = /run/media/chappa/Work/alpine/alpinegit/web/lib
+
+# You can specify a separate installation prefix for architecture-specific
+# files such as binaries and libraries.
+exec_prefix = ${prefix}
+
+# Short directory path where binaries can be found to support #! hack.
+# This directory path can be the same as the directory in which the binary
+# actually sits except when the path is so long that the #! mechanism breaks
+# (usually at 32 characters).
+# The solution is to create a directory with a very short name, which consists
+# only of symbolic links back to the true binaries.  Subtracting two for "#!"
+# and a couple more for arguments (typically " -f" or " --") gives you 27
+# characters.  Pathnames over this length won't be able to use the #! magic.
+# For more info on this, see the execve(2) man page.
+SHORT_BINDIR = $(exec_prefix)/bin
+
+# Tcl interpreter for utility work.
+CGI_TCL_EXECUTABLE = /usr/bin/tclsh
+
+# Where to put the examples - a directory in which your web server has
+# permission to execute CGI scripts.
+exampledir = /tmp/cgi-bin/cgi-tcl-examples
+
+######################################################################
+# End of things you may want to change
+#
+# Do not change anything after this
+######################################################################
+
+bindir_arch_indep = $(prefix)/bin
+libdir 	= $(exec_prefix)/lib
+datadir = $(prefix)/lib
+
+mandir 	= $(prefix)/man
+man1dir = $(mandir)/man1
+man3dir = $(mandir)/man3
+docdir = $(datadir)/doc
+
+# utility script directories - arch-independent and arch-non-
+# independent.
+SCRIPTDIR	= $(datadir)/cgi$(SHORT_VERSION)
+EXECSCRIPTDIR	= $(execdatadir)/cgi$(SHORT_VERSION)
+
+INSTALL = /usr/bin/install -c
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_DATA = ${INSTALL} -m 644
+
+# To install the following examples: make examples
+EXAMPLES=cookie.cgi creditcard.cgi \
+	display.cgi display-in-frame.cgi download.cgi \
+	echo.cgi error.cgi evaljs.cgi example.tcl examples.cgi \
+	form-tour.cgi form-tour-result.cgi format-tour.cgi frame.cgi \
+	image.cgi img.cgi kill.cgi nistguest.cgi oratcl.cgi \
+	parray.cgi passwd.tcl passwd-form.cgi passwd.cgi \
+	push.cgi rm.cgi stopwatch.cgi \
+	unimail.cgi upload.cgi uploadbin.cgi \
+	validate.cgi vclock.cgi vclock.pl vclock-src-frame.cgi visitor.cgi \
+	vote.cgi
+
+EXAMPLES_DATA=nistguest vote.cnt
+
+all: cgi.tcl pkgIndex.tcl
+
+info:
+dvi:
+
+# Delete all the installed files that the `install' target creates
+# (but not the noninstalled files such as `make all' creates)
+uninstall:
+	-rm -f $(SCRIPTDIR)/cgi.tcl
+	-rm -f $(man3dir)/cgi.tcl.3
+	-rm -f $(SCRIPTDIR)/pkgIndex.tcl
+
+.PHONY: install-info install info
+install-info:
+
+install: all
+	${srcdir}/mkinstalldirs $(man3dir) $(SCRIPTDIR) $(exampledir) $(exampledir)/data
+# install scripts
+	$(INSTALL_DATA) cgi.tcl $(SCRIPTDIR)
+# install library man page
+	$(INSTALL_DATA) cgi.tcl.man $(man3dir)/cgi.tcl.3
+	$(INSTALL_DATA) pkgIndex.tcl $(SCRIPTDIR)
+
+examples:
+	for i in $(EXAMPLES) ; do \
+	  $(CGI_TCL_EXECUTABLE) $(srcdir)/fixline1 $(SHORT_BINDIR) < $(srcdir)/example/$$i > $$i ; \
+	  $(INSTALL_PROGRAM) $$i $(exampledir) ; \
+	  rm -f $$i ; \
+	done
+	for i in $(EXAMPLES_DATA) ; do \
+	  $(INSTALL) -m 666 $(srcdir)/example/$$i $(exampledir)/data ; \
+	done
+
+cgi.tcl: $(srcdir)/cgi.tcl.in
+	@echo "Rebuilding cgi.tcl..."
+	$(SHELL) ./config.status
+
+###################################
+# Targets for Makefile and configure
+###################################
+
+Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) config.status
+	@echo "Rebuilding the Makefile..."
+	$(SHELL) ./config.status
+
+# Let "make -f Makefile.in" produce a configure file
+configure: $(srcdir)/configure.in $(srcdir)/Makefile.in
+	@echo "Rebuilding configure..."
+	if [ x"${srcdir}" = x"." ] ; then \
+	  srcdir=. ; export srcdir ; \
+	else true ; fi ; \
+	(cd $${srcdir}; autoconf)
+
+config.status: $(srcdir)/configure
+	@echo "Rebuilding config.status..."
+	$(SHELL) ./config.status --recheck
+
+check:
+	@if [ -f testsuite/Makefile ]; then \
+	   cd testsuite && $(MAKE) $(FLAGS_TO_PASS) check; \
+	else true; fi
+
+# updating of pkgIndex.tcl has not yet been totally automated
+# Instructions:
+# 1) Replace version # in cgi.tcl with updated version.
+#    (Gad, I'd have to turn the whole source into .in file to automate this
+#     and it'd be a major nuisance when developing!)
+pkgIndex.tcl: cgi.tcl
+	$(CGI_TCL_EXECUTABLE) pkgcreate
+
+################################################
+# Various "clean" targets follow GNU conventions
+################################################
+
+# delete all files from current directory that are created by "make"
+clean:
+	-rm -f *~ *.o core
+
+# like "clean", but also delete files created by "configure"
+distclean: clean
+	-rm -f Makefile config.status config.cache config.log
+	-rm -f Dbg_cf.h
+
+# like "clean", but doesn't delete test utilities or massaged scripts
+# because most people don't have to worry about them
+mostlyclean:
+	-rm -f *~ *.o core
+
+# delete everything from current directory that can be reconstructed
+# except for configure
+realclean:	distclean
+
+######################################
+# Targets for pushing out releases
+######################################
+
+FTPDIR = /itl/www/div826/subject/expect/cgi.tcl
+
+# make a private tar file for myself
+tar:	cgi.tcl-$(SHORT_VERSION).tar
+	mv cgi.tcl-$(SHORT_VERSION).tar cgi.tcl.tar
+
+# Make a release and install it on ftp server
+# Note that we run configure on our end to make sure that cgi.tcl is usable
+# for people who don't have configure at the destination end (non-UNIX folks).
+ftp:	cgi.tcl cgi.tcl-$(SHORT_VERSION).tar.Z cgi.tcl-$(SHORT_VERSION).tar.gz install-html
+	cp cgi.tcl-$(SHORT_VERSION).tar.Z $(FTPDIR)/cgi.tcl.tar.Z
+	cp cgi.tcl-$(SHORT_VERSION).tar.gz $(FTPDIR)/cgi.tcl.tar.gz
+	cp HISTORY $(FTPDIR)
+	cp README $(FTPDIR)/README.distribution
+	cp doc/ref.txt $(FTPDIR)
+	cp doc/ref.html $(FTPDIR)
+	cp example/README $(FTPDIR)/example
+	cp `pubfile example` $(FTPDIR)/example
+	ls -l $(FTPDIR)/cgi.tcl.tar*
+#	delete temp files
+	rm cgi.tcl-$(SHORT_VERSION).tar*
+
+cgi.tcl-$(SHORT_VERSION).tar: configure
+	rm -f ../cgi.tcl-$(SHORT_VERSION)
+	ln -s `pwd` ../cgi.tcl-$(SHORT_VERSION)
+	cd ..;tar cvfh $@ `pubfile cgi.tcl-$(SHORT_VERSION)`
+	mv ../$@ .
+
+cgi.tcl-$(SHORT_VERSION).tar.Z:	cgi.tcl-$(SHORT_VERSION).tar
+	compress -fc cgi.tcl-$(SHORT_VERSION).tar > $@
+
+cgi.tcl-$(SHORT_VERSION).tar.gz:	cgi.tcl-$(SHORT_VERSION).tar
+	gzip -fc cgi.tcl-$(SHORT_VERSION).tar > $@
+
+###########################
+# Targets for producing FAQ and homepage
+###########################
+
+NISTCGI_PREFIX = /local
+NISTCGI_HOST = ats.nist.gov
+NISTCGI_INTERPDIR = $(NISTCGI_PREFIX)/bin
+NISTCGI_LIBDIR = $(NISTCGI_PREFIX)/lib/cgi$(SHORT_VERSION)
+NISTCGI_EXAMPLEDIR = $(NISTCGI_HOST):/private/home/http/cgi-bin/cgi.tcl
+NISTCGI_HTMLDIR = /itl/www/div826/subject/expect/cgi.tcl
+
+# create the FAQ in html form
+FAQ.html:	FAQ.src FAQ.tcl
+	FAQ.src > FAQ.html
+
+# create the FAQ in text form
+#FAQ:	FAQ.src FAQ.tcl
+#	FAQ.src text > FAQ
+
+# generate home page
+homepage.html:	homepage.src common.tcl configure
+	homepage.src > homepage.html
+
+realapps.html:	realapps.src common.tcl
+	realapps.src > realapps.html
+
+RSH = ssh
+RCP = scp
+
+# install various html docs on our web server
+install-html:	FAQ.html homepage.html realapps.html pkgIndex.tcl cgi.tcl
+	cp FAQ.html $(NISTCGI_HTMLDIR)/
+	cp homepage.html $(NISTCGI_HTMLDIR)/index.html
+	cp realapps.html $(NISTCGI_HTMLDIR)/
+	-$(RSH) $(NISTCGI_HOST) mkdir $(NISTCGI_LIBDIR)/
+	$(RCP) cgi.tcl pkgIndex.tcl $(NISTCGI_HOST):$(NISTCGI_LIBDIR)/
+	for i in $(EXAMPLES) ; do \
+	  $(CGI_TCL_EXECUTABLE) $(srcdir)/fixline1 $(NISTCGI_INTERPDIR) < $(srcdir)/example/$$i > $$i ; \
+	  $(RCP) $$i $(NISTCGI_EXAMPLEDIR)/ ; \
+	  rm -f $$i ; \
+	done
+
+# add recursive support to the build process.
+subdir_do: force
+	@for i in $(SUBDIRS); do \
+	   echo "Making $(DO) in $${i}..." ; \
+	   if [ -d ./$$i ] ; then \
+	     if (rootme=`pwd`/ ; export rootme ; \
+	       rootsrc=`cd $(srcdir); pwd`/ ; export rootsrc ; \
+	       cd ./$$i; \
+	       $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
+	     else exit 1 ; fi ; \
+	   else true ; fi ; \
+	done
+force:
+
+## dependencies will be put after this line... ##