summaryrefslogtreecommitdiff
path: root/imap/docs/rfc/rfc5162.txt
diff options
context:
space:
mode:
authorEduardo Chappa <chappa@washington.edu>2013-11-02 02:51:18 -0600
committerEduardo Chappa <chappa@washington.edu>2013-11-02 02:51:18 -0600
commit7fe712882b909931088a318c08041b0e7974a000 (patch)
tree2770f9b084e2efc7fc55e96e9bf4352cf2ff33a3 /imap/docs/rfc/rfc5162.txt
parentbdfc834badee92ceeb2befe02f1d065ced5b9ddf (diff)
downloadalpine-7fe712882b909931088a318c08041b0e7974a000.tar.xz
* Update to version 2.19.1
* Upgrade UW-IMAP to Panda IMAP from https://github.com/jonabbey/panda-imap. * Replace tabs by spaces in From and Subject fields to control for size in screen of these fields. Change only in index screen display.
Diffstat (limited to 'imap/docs/rfc/rfc5162.txt')
-rw-r--r--imap/docs/rfc/rfc5162.txt1291
1 files changed, 1291 insertions, 0 deletions
diff --git a/imap/docs/rfc/rfc5162.txt b/imap/docs/rfc/rfc5162.txt
new file mode 100644
index 00000000..305c54fb
--- /dev/null
+++ b/imap/docs/rfc/rfc5162.txt
@@ -0,0 +1,1291 @@
+
+
+
+
+
+
+Network Working Group A. Melnikov
+Request for Comments: 5162 D. Cridland
+Category: Standards Track Isode Ltd
+ C. Wilson
+ Nokia
+ March 2008
+
+
+ IMAP4 Extensions for Quick Mailbox Resynchronization
+
+Status of This Memo
+
+ This document specifies an Internet standards track protocol for the
+ Internet community, and requests discussion and suggestions for
+ improvements. Please refer to the current edition of the "Internet
+ Official Protocol Standards" (STD 1) for the standardization state
+ and status of this protocol. Distribution of this memo is unlimited.
+
+Abstract
+
+ This document defines an IMAP4 extension, which gives an IMAP client
+ the ability to quickly resynchronize any previously opened mailbox as
+ part of the SELECT command, without the need for server-side state or
+ additional client round-trips. This extension also introduces a new
+ response that allows for a more compact representation of a list of
+ expunged messages (and always includes the Unique Identifiers (UIDs)
+ expunged).
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Melnikov, et al. Standards Track [Page 1]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+Table of Contents
+
+ 1. Introduction and Overview . . . . . . . . . . . . . . . . . . 2
+ 2. Requirements Notation . . . . . . . . . . . . . . . . . . . . 4
+ 3. IMAP Protocol Changes . . . . . . . . . . . . . . . . . . . . 4
+ 3.1. QRESYNC Parameter to SELECT/EXAMINE . . . . . . . . . . . 4
+ 3.2. VANISHED UID FETCH Modifier . . . . . . . . . . . . . . . 8
+ 3.3. EXPUNGE Command . . . . . . . . . . . . . . . . . . . . . 10
+ 3.4. CLOSE Command . . . . . . . . . . . . . . . . . . . . . . 11
+ 3.5. UID EXPUNGE Command . . . . . . . . . . . . . . . . . . . 11
+ 3.6. VANISHED Response . . . . . . . . . . . . . . . . . . . . 12
+ 3.7. CLOSED Response Code . . . . . . . . . . . . . . . . . . . 15
+ 4. Server Implementation Considerations . . . . . . . . . . . . . 15
+ 4.1. Server Implementations That Don't Store Extra State . . . 15
+ 4.2. Server Implementations Storing Minimal State . . . . . . . 16
+ 4.3. Additional State Required on the Server . . . . . . . . . 16
+ 5. Updated Synchronization Sequence . . . . . . . . . . . . . . . 17
+ 6. Formal Syntax . . . . . . . . . . . . . . . . . . . . . . . . 19
+ 7. Security Considerations . . . . . . . . . . . . . . . . . . . 20
+ 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 21
+ 9. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 21
+ 10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 21
+ 10.1. Normative References . . . . . . . . . . . . . . . . . . . 21
+ 10.2. Informative References . . . . . . . . . . . . . . . . . . 22
+
+1. Introduction and Overview
+
+ The [CONDSTORE] extension gives a disconnected client the ability to
+ quickly resynchronize IMAP flag changes for previously seen messages.
+ This can be done using the CHANGEDSINCE FETCH modifier once a mailbox
+ is opened. In order for the client to discover which messages have
+ been expunged, the client still has to issue a UID FETCH or a UID
+ SEARCH command. This document defines an extension to [CONDSTORE]
+ that allows a reconnecting client to perform full resynchronization,
+ including discovery of expunged messages, in a single round-trip.
+ This extension also introduces a new response, VANISHED, that allows
+ for a more compact representation of a list of expunged messages.
+
+ This extension can be useful for mobile clients that can experience
+ frequent disconnects caused by environmental factors (battery life,
+ signal strength, etc.). Such clients need a way to quickly reconnect
+ to the IMAP server, while minimizing delay experienced by the user as
+ well as the amount of traffic (and hence the expense) generated by
+ resynchronization.
+
+
+
+
+
+
+
+Melnikov, et al. Standards Track [Page 2]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+ By extending the SELECT command to perform the additional
+ resynchronization, this also allows clients to reduce concurrent
+ connections to the IMAP server held purely for the sake of avoiding
+ the resynchronization.
+
+ The quick resync IMAP extension is present if an IMAP4 server returns
+ "QRESYNC" as one of the supported capabilities to the CAPABILITY
+ command.
+
+ Servers supporting this extension MUST implement and advertise
+ support for the [ENABLE] IMAP extension. Also, the presence of the
+ "QRESYNC" capability implies support for the [CONDSTORE] IMAP
+ extension even if the CONDSTORE capability isn't advertised. A
+ server compliant with this specification is REQUIREd to support
+ "ENABLE QRESYNC" and "ENABLE QRESYNC CONDSTORE" (which are "CONDSTORE
+ enabling commands", as defined in [CONDSTORE], and have identical
+ results), but there is no requirement for a compliant server to
+ support "ENABLE CONDSTORE" by itself. The "ENABLE QRESYNC"/"ENABLE
+ QRESYNC CONDSTORE" command also tells the server that it SHOULD start
+ sending VANISHED responses (see Section 3.6) instead of EXPUNGE
+ responses. This change remains in effect until the connection is
+ closed.
+
+ For compatibility with clients that only support the [CONDSTORE] IMAP
+ extension, servers SHOULD advertise CONDSTORE in the CAPABILITY
+ response as well.
+
+ A client making use of this extension MUST issue "ENABLE QRESYNC"
+ once it is authenticated. A server MUST respond with a tagged BAD
+ response if the QRESYNC parameter to the SELECT/EXAMINE command or
+ the VANISHED UID FETCH modifier is specified and the client hasn't
+ issued "ENABLE QRESYNC" in the current connection.
+
+ This document puts additional requirements on a server implementing
+ the [CONDSTORE] extension. Each mailbox that supports persistent
+ storage of mod-sequences, i.e., for which the server has sent a
+ HIGHESTMODSEQ untagged OK response code on a successful SELECT/
+ EXAMINE, MUST increment the per-mailbox mod-sequence when one or more
+ messages are expunged due to EXPUNGE, UID EXPUNGE or CLOSE; the
+ server MUST associate the incremented mod-sequence with the UIDs of
+ the expunged messages.
+
+ A client that supports CONDSTORE but not this extension might
+ resynchronize a mailbox and discover that its HIGHESTMODSEQ has
+ increased from the value cached by the client. If the increase is
+ only due to messages having been expunged since the client last
+ synchronized, the client is likely to send a FETCH ... CHANGEDSINCE
+ command that returns no data. Thus, a client that supports CONDSTORE
+
+
+
+Melnikov, et al. Standards Track [Page 3]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+ but not this extension might incur a penalty of an unneeded round-
+ trip when resynchronizing some mailboxes (those that have had
+ messages expunged but no flag changes since the last
+ synchronization).
+
+ This extra round-trip is only incurred by clients that support
+ CONDSTORE but not this extension, and only when a mailbox has had
+ messages expunged but no flag changes to non-expunged messages.
+ Since CONDSTORE is a relatively new extension, it is thought likely
+ that clients that support it will also support this extension.
+
+2. Requirements Notation
+
+ The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
+ "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
+ document are to be interpreted as described in [RFC2119].
+
+ In examples, "C:" and "S:" indicate lines sent by the client and
+ server respectively. If a single "C:" or "S:" label applies to
+ multiple lines, then the line breaks between those lines are for
+ editorial clarity only and are not part of the actual protocol
+ exchange. The five characters [...] means that something has been
+ elided.
+
+ Understanding of the IMAP message sequence numbers and UIDs and the
+ EXPUNGE response [RFC3501] is essential when reading this document.
+
+3. IMAP Protocol Changes
+
+3.1. QRESYNC Parameter to SELECT/EXAMINE
+
+ The Quick Resynchronization parameter to SELECT/EXAMINE commands has
+ four arguments:
+
+ o the last known UIDVALIDITY,
+
+ o the last known modification sequence,
+
+ o the optional set of known UIDs, and
+
+ o an optional parenthesized list of known sequence ranges and their
+ corresponding UIDs.
+
+ A server MUST respond with a tagged BAD response if the Quick
+ Resynchronization parameter to SELECT/EXAMINE command is specified
+ and the client hasn't issued "ENABLE QRESYNC" in the current
+ connection.
+
+
+
+
+Melnikov, et al. Standards Track [Page 4]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+ Before opening the specified mailbox, the server verifies all
+ arguments for syntactic validity. If any parameter is not
+ syntactically valid, the server returns the tagged BAD response, and
+ the mailbox remains unselected. Once the check is done, the server
+ opens the mailbox as if no SELECT/EXAMINE parameters are specified
+ (this is subject to processing of other parameters as defined in
+ other extensions). In particular this means that the server MUST
+ send all untagged responses as specified in Sections 6.3.1 and 6.3.2
+ of [RFC3501].
+
+ After that, the server checks the UIDVALIDITY value provided by the
+ client. If the provided UIDVALIDITY doesn't match the UIDVALIDITY
+ for the mailbox being opened, then the server MUST ignore the
+ remaining parameters and behave as if no dynamic message data
+ changed. The client can discover this situation by comparing the
+ UIDVALIDITY value returned by the server. This behavior allows the
+ client not to synchronize the mailbox or decide on the best
+ synchronization strategy.
+
+ Example: Attempting to resynchronize INBOX, but the provided
+ UIDVALIDITY parameter doesn't match the current UIDVALIDITY
+ value.
+
+ C: A02 SELECT INBOX (QRESYNC (67890007 20050715194045000
+ 41,43:211,214:541))
+ S: * 464 EXISTS
+ S: * 3 RECENT
+ S: * OK [UIDVALIDITY 3857529045] UIDVALIDITY
+ S: * OK [UIDNEXT 550] Predicted next UID
+ S: * OK [HIGHESTMODSEQ 90060128194045007]
+ S: * OK [UNSEEN 12] Message 12 is first unseen
+ S: * FLAGS (\Answered \Flagged \Draft \Deleted \Seen)
+ S: * OK [PERMANENTFLAGS (\Answered \Flagged \Draft
+ \Deleted \Seen \*)] Permanent flags
+ S: A02 OK [READ-WRITE] Sorry, UIDVALIDITY mismatch
+
+ Modification Sequence and UID Parameters:
+
+ A server that doesn't support the persistent storage of mod-sequences
+ for the mailbox MUST send the OK untagged response including the
+ NOMODSEQ response code with every successful SELECT or EXAMINE
+ command, as described in [CONDSTORE]. Such a server doesn't need to
+ remember mod-sequences for expunged messages in the mailbox. It MUST
+ ignore the remaining parameters and behave as if no dynamic message
+ data changed.
+
+ If the provided UIDVALIDITY matches that of the selected mailbox, the
+ server then checks the last known modification sequence.
+
+
+
+Melnikov, et al. Standards Track [Page 5]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+ The server sends the client any pending flag changes (using FETCH
+ responses that MUST contain UIDs) and expunges those that have
+ occurred in this mailbox since the provided modification sequence.
+
+ If the list of known UIDs was also provided, the server should only
+ report flag changes and expunges for the specified messages. If the
+ client did not provide the list of UIDs, the server acts as if the
+ client has specified "1:<maxuid>", where <maxuid> is the mailbox's
+ UIDNEXT value minus 1. If the mailbox is empty and never had any
+ messages in it, then lack of the list of UIDs is interpreted as an
+ empty set of UIDs.
+
+ Thus, the client can process just these pending events and need not
+ perform a full resynchronization. Without the message sequence
+ number matching information, the result of this step is semantically
+ equivalent to the client issuing:
+ tag1 UID FETCH "known-uids" (FLAGS) (CHANGEDSINCE
+ "mod-sequence-value" VANISHED)
+
+ Example:
+ C: A03 SELECT INBOX (QRESYNC (67890007
+ 90060115194045000 41,43:211,214:541))
+ S: * OK [CLOSED]
+ S: * 314 EXISTS
+ S: * 15 RECENT
+ S: * OK [UIDVALIDITY 67890007] UIDVALIDITY
+ S: * OK [UIDNEXT 567] Predicted next UID
+ S: * OK [HIGHESTMODSEQ 90060115205545359]
+ S: * OK [UNSEEN 7] There are some unseen messages in the mailbox
+ S: * FLAGS (\Answered \Flagged \Draft \Deleted \Seen)
+ S: * OK [PERMANENTFLAGS (\Answered \Flagged \Draft
+ \Deleted \Seen \*)] Permanent flags
+ S: * VANISHED (EARLIER) 41,43:116,118,120:211,214:540
+ S: * 49 FETCH (UID 117 FLAGS (\Seen \Answered) MODSEQ
+ (90060115194045001))
+ S: * 50 FETCH (UID 119 FLAGS (\Draft $MDNSent) MODSEQ
+ (90060115194045308))
+ S: ...
+ S: * 100 FETCH (UID 541 FLAGS (\Seen $Forwarded) MODSEQ
+ (90060115194045001))
+ S: A03 OK [READ-WRITE] mailbox selected
+
+ Message sequence match data:
+
+ A client MAY provide a parenthesized list of a message sequence set
+ and the corresponding UID sets. Both MUST be provided in ascending
+ order. The server uses this data to restrict the range for which it
+ provides expunged message information.
+
+
+
+Melnikov, et al. Standards Track [Page 6]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+ Conceptually, the client provides a small sample of sequence numbers
+ for which it knows the corresponding UIDs. The server then compares
+ each sequence number and UID pair the client provides with the
+ current state of the mailbox. If a pair matches, then the client
+ knows of any expunges up to, and including, the message, and thus
+ will not include that range in the VANISHED response, even if the
+ "mod-sequence-value" provided by the client is too old for the server
+ to have data of when those messages were expunged.
+
+ Thus, if the Nth message number in the first set in the list is 4,
+ and the Nth UID in the second set in the list is 8, and the mailbox's
+ fourth message has UID 8, then no UIDs equal to or less than 8 are
+ present in the VANISHED response. If the (N+1)th message number is
+ 12, and the (N+1)th UID is 24, and the (N+1)th message in the mailbox
+ has UID 25, then the lowest UID included in the VANISHED response
+ would be 9.
+
+ In the following two examples, the server is unable to remember
+ expunges at all, and only UIDs with messages divisible by three are
+ present in the mailbox. In the first example, the client does not
+ use the fourth parameter; in the second, it provides it. This
+ example is somewhat extreme, but shows that judicious usage of the
+ sequence match data can save a substantial amount of bandwidth.
+
+ Example:
+ C: A04 SELECT INBOX (QRESYNC (67890007
+ 90060115194045000 1:29997))
+ S: * 10003 EXISTS
+ S: * 5 RECENT
+ S: * OK [UIDVALIDITY 67890007] UIDVALIDITY
+ S: * OK [UIDNEXT 30013] Predicted next UID
+ S: * OK [HIGHESTMODSEQ 90060115205545359]
+ S: * OK [UNSEEN 7] There are some unseen messages in the mailbox
+ S: * FLAGS (\Answered \Flagged \Draft \Deleted \Seen)
+ S: * OK [PERMANENTFLAGS (\Answered \Flagged \Draft
+ \Deleted \Seen \*)] Permanent flags
+ S: * VANISHED (EARLIER) 1:2,4:5,7:8,10:11,13:14 [...]
+ 29998:29999,30001:30002,30004:30005,30007:30008
+ S: * 9889 FETCH (UID 29667 FLAGS (\Seen \Answered) MODSEQ
+ (90060115194045027))
+ S: * 9890 FETCH (UID 29670 FLAGS (\Draft $MDNSent) MODSEQ
+ (90060115194045028))
+ S: ...
+ S: * 9999 FETCH (UID 29997 FLAGS (\Seen $Forwarded) MODSEQ
+ (90060115194045031))
+ S: A04 OK [READ-WRITE] mailbox selected
+
+
+
+
+
+Melnikov, et al. Standards Track [Page 7]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+ Example:
+ C: B04 SELECT INBOX (QRESYNC (67890007
+ 90060115194045000 1:29997 (5000,7500,9000,9990:9999 15000,
+ 22500,27000,29970,29973,29976,29979,29982,29985,29988,29991,
+ 29994,29997)))
+ S: * 10003 EXISTS
+ S: * 5 RECENT
+ S: * OK [UIDVALIDITY 67890007] UIDVALIDITY
+ S: * OK [UIDNEXT 30013] Predicted next UID
+ S: * OK [HIGHESTMODSEQ 90060115205545359]
+ S: * OK [UNSEEN 7] There are some unseen messages in the mailbox
+ S: * FLAGS (\Answered \Flagged \Draft \Deleted \Seen)
+ S: * OK [PERMANENTFLAGS (\Answered \Flagged \Draft
+ \Deleted \Seen \*)] Permanent flags
+ S: * VANISHED (EARLIER) 29998:29999,30001:30002,30004:30005,30007:
+ 30008
+ S: * 9889 FETCH (UID 29667 FLAGS (\Seen \Answered) MODSEQ
+ (90060115194045027))
+ S: * 9890 FETCH (UID 29670 FLAGS (\Draft $MDNSent) MODSEQ
+ (90060115194045028))
+ S: ...
+ S: * 9999 FETCH (UID 29997 FLAGS (\Seen $Forwarded) MODSEQ
+ (90060115194045031))
+ S: B04 OK [READ-WRITE] mailbox selected
+
+3.2. VANISHED UID FETCH Modifier
+
+ [IMAPABNF] has extended the syntax of the FETCH and UID FETCH
+ commands to include an optional FETCH modifier. This document
+ defines a new UID FETCH modifier: VANISHED.
+
+ Note, that the VANISHED UID FETCH modifier is NOT allowed with a
+ FETCH command. The server MUST return a tagged BAD response if this
+ response is specified as a modifier to the FETCH command.
+
+ A server MUST respond with a tagged BAD response if the VANISHED UID
+ FETCH modifier is specified and the client hasn't issued "ENABLE
+ QRESYNC" in the current connection.
+
+ The VANISHED UID FETCH modifier MUST only be specified together with
+ the CHANGEDSINCE UID FETCH modifier.
+
+ The VANISHED UID FETCH modifier instructs the server to report those
+ messages from the UID set parameter that have been expunged and whose
+ associated mod-sequence is larger than the specified mod-sequence.
+ That is, the client requests to be informed of messages from the
+ specified set that were expunged since the specified mod-sequence.
+ Note that the mod-sequence(s) associated with these messages were
+
+
+
+Melnikov, et al. Standards Track [Page 8]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+ updated when the messages were expunged (as described above). The
+ expunged messages are reported using the VANISHED response as
+ described in Section 3.6, which MUST contain the EARLIER tag. Any
+ VANISHED (EARLIER) responses MUST be returned before any FETCH
+ responses, as otherwise the client might get confused about how
+ message numbers map to UIDs.
+
+ Note: A server that receives a mod-sequence smaller than <minmodseq>,
+ where <minmodseq> is the value of the smallest expunged mod-sequence
+ it remembers minus one, MUST behave as if it was requested to report
+ all expunged messages from the provided UID set parameter.
+
+ Example 1: Without the VANISHED UID FETCH modifier, a CONDSTORE-aware
+ client [CONDSTORE] needs to issue separate commands to learn of flag
+ changes and expunged messages since the last synchronization:
+
+ C: s100 UID FETCH 300:500 (FLAGS) (CHANGEDSINCE 12345)
+ S: * 1 FETCH (UID 404 MODSEQ (65402) FLAGS (\Seen))
+ S: * 2 FETCH (UID 406 MODSEQ (75403) FLAGS (\Deleted))
+ S: * 4 FETCH (UID 408 MODSEQ (29738) FLAGS ($NoJunk
+ $AutoJunk $MDNSent))
+ S: s100 OK FETCH completed
+ C: s101 UID SEARCH 300:500
+ S: * SEARCH 404 406 407 408 410 412
+ S: s101 OK search completed
+
+ Where 300 and 500 are the lowest and highest UIDs from client's
+ cache. The second SEARCH response tells the client that the messages
+ with UIDs 407, 410, and 412 are still present, but their flags
+ haven't changed since the specified modification sequence.
+
+ Using the VANISHED UID FETCH modifier, it is sufficient to issue only
+ a single command:
+
+ C: s100 UID FETCH 300:500 (FLAGS) (CHANGEDSINCE 12345
+ VANISHED)
+ S: * VANISHED (EARLIER) 300:310,405,411
+ S: * 1 FETCH (UID 404 MODSEQ (65402) FLAGS (\Seen))
+ S: * 2 FETCH (UID 406 MODSEQ (75403) FLAGS (\Deleted))
+ S: * 4 FETCH (UID 408 MODSEQ (29738) FLAGS ($NoJunk
+ $AutoJunk $MDNSent))
+ S: s100 OK FETCH completed
+
+
+
+
+
+
+
+
+
+Melnikov, et al. Standards Track [Page 9]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+3.3. EXPUNGE Command
+
+ Arguments: none
+
+ Responses: untagged responses: EXPUNGE or VANISHED
+
+ Result: OK - expunge completed
+ NO - expunge failure: can't expunge (e.g., permission denied)
+ BAD - command unknown or arguments invalid
+
+ This section updates the definition of the EXPUNGE command described
+ in Section 6.4.3 of [RFC3501].
+
+ The EXPUNGE command permanently removes all messages that have the
+ \Deleted flag set from the currently selected mailbox. Before
+ returning an OK to the client, those messages that are removed are
+ reported using a VANISHED response or EXPUNGE responses.
+
+ If the server is capable of storing modification sequences for the
+ selected mailbox, it MUST increment the per-mailbox mod-sequence if
+ at least one message was permanently removed due to the execution of
+ the EXPUNGE command. For each permanently removed message, the
+ server MUST remember the incremented mod-sequence and corresponding
+ UID. If at least one message got expunged, the server MUST send the
+ updated per-mailbox modification sequence using the HIGHESTMODSEQ
+ response code (defined in [CONDSTORE]) in the tagged OK response.
+
+ Example: C: A202 EXPUNGE
+ S: * 3 EXPUNGE
+ S: * 3 EXPUNGE
+ S: * 5 EXPUNGE
+ S: * 8 EXPUNGE
+ S: A202 OK [HIGHESTMODSEQ 20010715194045319] expunged
+
+ Note: In this example, messages 3, 4, 7, and 11 had the \Deleted flag
+ set. The first "* 3 EXPUNGE" reports message # 3 as expunged. The
+ second "* 3 EXPUNGE" reports message # 4 as expunged (the message
+ number got decremented due to the previous EXPUNGE response). See
+ the description of the EXPUNGE response in [RFC3501] for further
+ explanation.
+
+ Note that if the server chooses to always send VANISHED responses
+ instead of EXPUNGE responses, the previous example might look like
+ this:
+
+ Example: C: B202 EXPUNGE
+ S: * VANISHED 405,407,410,425
+ S: B202 OK [HIGHESTMODSEQ 20010715194045319] expunged
+
+
+
+Melnikov, et al. Standards Track [Page 10]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+ Here messages with message numbers 3, 4, 7, and 11 have respective
+ UIDs 405, 407, 410, and 425.
+
+3.4. CLOSE Command
+
+ Arguments: none
+
+ Responses: no specific responses for this command
+
+ Result: OK - close completed, now in authenticated state
+ BAD - command unknown or arguments invalid
+
+ This section updates the definition of the CLOSE command described in
+ Section 6.4.2 of [RFC3501].
+
+ The CLOSE command permanently removes all messages that have the
+ \Deleted flag set from the currently selected mailbox, and returns to
+ the authenticated state from the selected state. No untagged EXPUNGE
+ (or VANISHED) responses are sent.
+
+ If the server is capable of storing modification sequences for the
+ selected mailbox, it MUST increment the per-mailbox mod-sequence if
+ at least one message was permanently removed due to the execution of
+ the CLOSE command. For each permanently removed message, the server
+ MUST remember the incremented mod-sequence and corresponding UID. If
+ at least one message got expunged, the server MUST send the updated
+ per-mailbox modification sequence using the HIGHESTMODSEQ response
+ code (defined in [CONDSTORE]) in the tagged OK response.
+
+ Example: C: A202 CLOSE
+ S: A202 OK [HIGHESTMODSEQ 20010715194045319] done
+
+3.5. UID EXPUNGE Command
+
+ Arguments: message set
+
+ Responses: untagged responses: EXPUNGE or VANISHED
+
+ Result: OK - expunge completed
+ NO - expunge failure: can't expunge (e.g., permission denied)
+ BAD - command unknown or arguments invalid
+
+ This section updates the definition of the UID EXPUNGE command
+ described in Section 2.1 of [UIDPLUS]. Servers that implement both
+ [UIDPLUS] and QRESYNC extensions must implement UID EXPUNGE as
+ described in this section.
+
+
+
+
+
+Melnikov, et al. Standards Track [Page 11]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+ The UID EXPUNGE command permanently removes from the currently
+ selected mailbox all messages that both have the \Deleted flag set
+ and have a UID that is included in the specified message set. If a
+ message either does not have the \Deleted flag set or has a UID that
+ is not included in the specified message set, it is not affected.
+
+ This command is particularly useful for disconnected mode clients.
+ By using UID EXPUNGE instead of EXPUNGE when resynchronizing with the
+ server, the client can avoid inadvertently removing any messages that
+ have been marked as \Deleted by other clients between the time that
+ the client was last connected and the time the client resynchronizes.
+
+ Before returning an OK to the client, those messages that are removed
+ are reported using a VANISHED response or EXPUNGE responses.
+
+ If the server is capable of storing modification sequences for the
+ selected mailbox, it MUST increment the per-mailbox mod-sequence if
+ at least one message was permanently removed due to the execution of
+ the UID EXPUNGE command. For each permanently removed message, the
+ server MUST remember the incremented mod-sequence and corresponding
+ UID. If at least one message got expunged, the server MUST send the
+ updated per-mailbox modification sequence using the HIGHESTMODSEQ
+ response code (defined in [CONDSTORE]) in the tagged OK response.
+
+ Example: C: . UID EXPUNGE 3000:3002
+ S: * 3 EXPUNGE
+ S: * 3 EXPUNGE
+ S: * 3 EXPUNGE
+ S: . OK [HIGHESTMODSEQ 20010715194045319] Ok
+
+ Note: In this example, at least messages with message numbers 3, 4,
+ and 5 (UIDs 3000 to 3002) had the \Deleted flag set. The first "* 3
+ EXPUNGE" reports message # 3 as expunged. The second "* 3 EXPUNGE"
+ reports message # 4 as expunged (the message number got decremented
+ due to the previous EXPUNGE response). See the description of the
+ EXPUNGE response in [RFC3501] for further explanation.
+
+3.6. VANISHED Response
+
+ Contents: an optional EARLIER tag
+
+ list of UIDs
+
+ The VANISHED response reports that the specified UIDs have been
+ permanently removed from the mailbox. This response is similar to
+ the EXPUNGE response [RFC3501]; however, it can return information
+ about multiple messages, and it returns UIDs instead of message
+
+
+
+
+Melnikov, et al. Standards Track [Page 12]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+ numbers. The first benefit saves bandwidth, while the second is more
+ convenient for clients that only use UIDs to access the IMAP server.
+
+ The VANISHED response has the same restrictions on when it can be
+ sent as does the EXPUNGE response (see below).
+
+ The VANISHED response has two forms. The first form contains the
+ EARLIER tag, which signifies that the response was caused by a UID
+ FETCH (VANISHED) or a SELECT/EXAMINE (QRESYNC) command. This
+ response is sent if the UID set parameter to the UID FETCH (VANISHED)
+ command includes UIDs of messages that are no longer in the mailbox.
+ When the client sees a VANISHED EARLIER response, it MUST NOT
+ decrement message sequence numbers for each successive message in the
+ mailbox.
+
+ The second form doesn't contain the EARLIER tag and is described
+ below. Once a client has issued "ENABLE QRESYNC", the server SHOULD
+ use the VANISHED response without the EARLIER tag instead of the
+ EXPUNGE response. The server SHOULD continue using VANISHED in lieu
+ of EXPUNGE for the duration of the connection. In particular, this
+ affects the EXPUNGE [RFC3501] and UID EXPUNGE [UIDPLUS] commands, as
+ well as messages expunged in other connections. Such a VANISHED
+ response MUST NOT contain the EARLIER tag.
+
+ A VANISHED response sent because of an EXPUNGE or UID EXPUNGE command
+ or because messages were expunged in other connections (i.e., the
+ VANISHED response without the EARLIER tag) also decrements the number
+ of messages in the mailbox; it is not necessary for the server to
+ send an EXISTS response with the new value. It also decrements
+ message sequence numbers for each successive message in the mailbox
+ (see the example at the end of this section). Note that a VANISHED
+ response caused by EXPUNGE, UID EXPUNGE, or messages expunged in
+ other connections SHOULD only contain UIDs for messages expunged
+ since the last VANISHED/EXPUNGE response sent for the currently
+ opened mailbox or since the mailbox was opened. That is, servers
+ SHOULD NOT send UIDs for previously expunged messages, unless
+ explicitly requested to do so by the UID FETCH (VANISHED) command.
+
+ Note that client implementors must take care to properly decrement
+ the number of messages in the mailbox even if a server violates this
+ last SHOULD or repeats the same UID multiple times in the returned
+ UID set. In general, this means that a client using this extension
+ should either avoid using message numbers entirely, or have a
+ complete mapping of UIDs to message sequence numbers for the selected
+ mailbox.
+
+
+
+
+
+
+Melnikov, et al. Standards Track [Page 13]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+ Because clients handle the two different forms of the VANISHED
+ response differently, servers MUST NOT report UIDs resulting from a
+ UID FETCH (VANISHED) or a SELECT/EXAMINE (QRESYNC) in the same
+ VANISHED response as UIDs of messages expunged now (i.e., messages
+ expunged in other connections). Instead, the server MUST send
+ separate VANISHED responses: one with the EARLIER tag and one
+ without.
+
+ A VANISHED response MUST NOT be sent when no command is in progress,
+ nor while responding to a FETCH, STORE, or SEARCH command. This rule
+ is necessary to prevent a loss of synchronization of message sequence
+ numbers between client and server. A command is not "in progress"
+ until the complete command has been received; in particular, a
+ command is not "in progress" during the negotiation of command
+ continuation.
+
+ Note: UID FETCH, UID STORE, and UID SEARCH are different commands
+ from FETCH, STORE, and SEARCH. A VANISHED response MAY be sent
+ during a UID command. However, the VANISHED response MUST NOT be
+ sent during a UID SEARCH command that contains message numbers in the
+ search criteria.
+
+ The update from the VANISHED response MUST be recorded by the client.
+
+ Example: Let's assume that there is the following mapping between
+ message numbers and UIDs in the currently selected mailbox (here "X"
+ marks messages with the \Deleted flag set, and "x" represents UIDs
+ which are not relevant for the example):
+
+ Message numbers: 1 2 3 4 5 6 7 8 9 10 11
+ UIDs: x 504 505 507 508 x 510 x x x 625
+ \Deleted messages: X X X X
+
+ In the presence of the extension defined in this document:
+
+ C: A202 EXPUNGE
+ S: * VANISHED 505,507,510,625
+ S: A202 OK EXPUNGE completed
+
+ Without the QRESYNC extension, the same example might look like:
+
+ C: A202 EXPUNGE
+ S: * 3 EXPUNGE
+ S: * 3 EXPUNGE
+ S: * 5 EXPUNGE
+ S: * 8 EXPUNGE
+ S: A202 OK EXPUNGE completed
+
+
+
+
+Melnikov, et al. Standards Track [Page 14]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+ (Continuing previous example) If subsequently messages with UIDs 504
+ and 508 got marked as \Deleted:
+
+ C: A210 EXPUNGE
+ S: * VANISHED 504,508
+ S: A210 OK EXPUNGE completed
+
+ i.e., the last VANISHED response only contains UIDs of messages
+ expunged since the previous VANISHED response.
+
+3.7. CLOSED Response Code
+
+ The CLOSED response code has no parameters. A server implementing
+ the extension defined in this document MUST return the CLOSED
+ response code when the currently selected mailbox is closed
+ implicitly using the SELECT/EXAMINE command on another mailbox. The
+ CLOSED response code serves as a boundary between responses for the
+ previously opened mailbox (which was closed) and the newly selected
+ mailbox: all responses before the CLOSED response code relate to the
+ mailbox that was closed, and all subsequent responses relate to the
+ newly opened mailbox.
+
+ There is no need to return the CLOSED response code on completion of
+ the CLOSE or the UNSELECT [UNSELECT] command (or similar) whose
+ purpose is to close the currently selected mailbox without opening a
+ new one.
+
+4. Server Implementation Considerations
+
+ This section describes a minimalist implementation, a moderate
+ implementation, and an example of a full implementation.
+
+4.1. Server Implementations That Don't Store Extra State
+
+ Strictly speaking, a server implementation that doesn't remember mod-
+ sequences associated with expunged messages can be considered
+ compliant with this specification. Such implementations return all
+ expunged messages specified in the UID set of the UID FETCH
+ (VANISHED) command every time, without paying attention to the
+ specified CHANGEDSINCE mod-sequence. Such implementations are
+ discouraged, as they can end up returning VANISHED responses that are
+ bigger than the result of a UID SEARCH command for the same UID set.
+
+ Clients that use the message sequence match data can reduce the scope
+ of this VANISHED response substantially in the typical case where
+ expunges have not happened, or happen only toward the end of the
+ mailbox.
+
+
+
+
+Melnikov, et al. Standards Track [Page 15]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+4.2. Server Implementations Storing Minimal State
+
+ A server that stores the HIGHESTMODSEQ value at the time of the last
+ EXPUNGE can omit the VANISHED response when a client provides a
+ MODSEQ value that is equal to, or higher than, the current value of
+ this datum, that is, when there have been no EXPUNGEs.
+
+ A client providing message sequence match data can reduce the scope
+ as above. In the case where there have been no expunges, the server
+ can ignore this data.
+
+4.3. Additional State Required on the Server
+
+ When compared to the [CONDSTORE] extension, this extension requires
+ servers to store additional state associated with expunged messages.
+ Note that implementations are not required to store this state in
+ persistent storage; however, use of persistent storage is advisable.
+
+ One possible way to correctly implement the extension described in
+ this document is to store a queue of <UID set, mod-sequence> pairs.
+ <UID set> can be represented as a sequence of <min UID, max UID>
+ pairs.
+
+ When messages are expunged, one or more entries are added to the
+ queue tail.
+
+ When the server receives a request to return messages expunged since
+ a given mod-sequence, it will search the queue from the tail (i.e.,
+ going from the highest expunged mod-sequence to the lowest) until it
+ sees the first record with a mod-sequence less than or equal to the
+ given mod-sequence or it reaches the head of the queue.
+
+ Note that indefinitely storing information about expunged messages
+ can cause storage and related problems for an implementation. In the
+ worst case, this could result in almost 64Gb of storage for each IMAP
+ mailbox. For example, consider an implementation that stores <min
+ UID, max UID, mod-sequence> triples for each range of messages
+ expunged at the same time. Each triple requires 16 octets: 4 octets
+ for each of the two UIDs, and 8 octets for the mod-sequence. Assume
+ that there is a mailbox containing a single message with a UID of
+ 2**32-1 (the maximum possible UID value), where messages had
+ previously existed with UIDs starting at 1, and have been expunged
+ one at a time. For this mailbox alone, storage is required for the
+ triples <1, 1, modseq1>, <2, 2, modseq2>, ..., <2**32-2, 2**32-2,
+ modseq4294967294>.
+
+
+
+
+
+
+Melnikov, et al. Standards Track [Page 16]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+ Hence, implementations are encouraged to adopt strategies to protect
+ against such storage problems, such as limiting the size of the queue
+ used to store mod-sequences for expunged messages and "expiring"
+ older records when this limit is reached. When the selected
+ implementation-specific queue limit is reached, the oldest record(s)
+ are deleted from the queue (note that such records are located at the
+ queue head). For all such "expired" records, the server needs to
+ store a single mod-sequence, which is the highest mod-sequence for
+ all "expired" expunged messages.
+
+ Note that if the client provides the message sequence match data,
+ this can heavily reduce the data cost of sending a complete set of
+ missing UIDs; thus, reducing the problems for clients if a server is
+ unable to persist much of this queue. If the queue contains data
+ back to the requested mod-sequence, this data can be ignored.
+
+ Also, note that if the UIDVALIDITY of the mailbox changes or if the
+ mailbox is deleted, then any state associated with expunged messages
+ doesn't need to be preserved and SHOULD be deleted.
+
+5. Updated Synchronization Sequence
+
+ This section updates the description of optimized synchronization in
+ Section 6.1 of the [IMAP-DISC].
+
+ An advanced disconnected mail client should use the QRESYNC and
+ [CONDSTORE] extensions when they are supported by the server. The
+ client uses the value from the HIGHESTMODSEQ OK response code
+ received on mailbox opening to determine if it needs to
+ resynchronize. Once the synchronization is complete, it MUST cache
+ the received value (unless the mailbox UIDVALIDITY value has changed;
+ see below). The client MUST update its copy of the HIGHESTMODSEQ
+ value whenever the server sends a subsequent HIGHESTMODSEQ OK
+ response code.
+
+ After completing a full synchronization, the client MUST also take
+ note of any unsolicited MODSEQ FETCH data items received from the
+ server. Whenever the client receives a tagged response to a command,
+ it calculates the highest value among all MODSEQ FETCH data items
+ received since the last tagged response. If this value is bigger
+ than the client's copy of the HIGHESTMODSEQ value, then the client
+ MUST use this value as its new HIGHESTMODSEQ value.
+
+ Note: It is not safe to update the client's copy of the HIGHESTMODSEQ
+ value with a MODSEQ FETCH data item value as soon as it is received
+ because servers are not required to send MODSEQ FETCH data items in
+ increasing modseqence order. This can lead to the client missing
+ some changes in case of connectivity loss.
+
+
+
+Melnikov, et al. Standards Track [Page 17]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+ When opening the mailbox for synchronization, the client uses the
+ QRESYNC parameter to the SELECT/EXAMINE command. The QRESYNC
+ parameter is followed by the UIDVALIDITY and mailbox HIGHESTMODSEQ
+ values, as known to the client. It can be optionally followed by the
+ set of UIDs, for example, if the client is only interested in partial
+ synchronization of the mailbox. The client may also transmit a list
+ containing its knowledge of message numbers.
+
+ If the SELECT/EXAMINE command is successful, the client compares
+ UIDVALIDITY as described in step d)1) in Section 3 of the
+ [IMAP-DISC]. If the cached UIDVALIDITY value matches the one
+ returned by the server and the server also returns the HIGHESTMODSEQ
+ response code, then the server reports expunged messages and returns
+ flag changes for all messages specified by the client in the UID set
+ parameter (or for all messages in the mailbox, if the client omitted
+ the UID set parameter). At this point, the client is synchronized,
+ except for maybe the new messages.
+
+ If upon a successful SELECT/EXAMINE (QRESYNC) command the client
+ receives a NOMODSEQ OK untagged response (instead of the
+ HIGHESTMODSEQ response code), it MUST remove the last known
+ HIGHESTMODSEQ value from its cache and follow the more general
+ instructions in Section 3 of the [IMAP-DISC].
+
+ At this point, the client is in sync with the server regarding old
+ messages. This client can now fetch information about new messages
+ (if requested by the user).
+
+ Step d) ("Server-to-client synchronization") in Section 4 of the
+ [IMAP-DISC] in the presence of the QRESYNC & CONDSTORE extensions is
+ amended as follows:
+
+ d) "Server-to-client synchronization" -- for each mailbox that
+ requires synchronization, do the following:
+
+ 1a) Check the mailbox UIDVALIDITY (see Section 4.1 of the [IMAP-DISC]
+ for more details) after issuing SELECT/EXAMINE (QRESYNC) command.
+
+ If the UIDVALIDITY value returned by the server differs, the
+ client MUST
+
+ * empty the local cache of that mailbox;
+
+ * "forget" the cached HIGHESTMODSEQ value for the mailbox;
+
+
+
+
+
+
+
+Melnikov, et al. Standards Track [Page 18]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+ * remove any pending "actions" which refer to UIDs in that
+ mailbox. Note, this doesn't affect actions performed on
+ client generated fake UIDs (see Section 5 of the
+ [IMAP-DISC]);
+
+ 2) Fetch the current "descriptors";
+
+ I) Discover new messages.
+
+ 3) Fetch the bodies of any "interesting" messages that the client
+ doesn't already have.
+
+ Example: The UIDVALIDITY value is the same, but the HIGHESTMODSEQ
+ value has changed on the server while the client was
+ offline:
+
+ C: A142 SELECT INBOX (QRESYNC (3857529045 20010715194032001 1:198))
+ S: * 172 EXISTS
+ S: * 1 RECENT
+ S: * OK [UNSEEN 12] Message 12 is first unseen
+ S: * OK [UIDVALIDITY 3857529045] UIDs valid
+ S: * OK [UIDNEXT 201] Predicted next UID
+ S: * FLAGS (\Answered \Flagged \Deleted \Seen \Draft)
+ S: * OK [PERMANENTFLAGS (\Deleted \Seen \*)] Limited
+ S: * OK [HIGHESTMODSEQ 20010715194045007]
+ S: * VANISHED (EARLIER) 1:5,7:8,10:15
+ S: * 2 FETCH (UID 6 MODSEQ (20010715205008000)
+ FLAGS (\Deleted))
+ S: * 5 FETCH (UID 9 MODSEQ (20010715195517000)
+ FLAGS ($NoJunk $AutoJunk $MDNSent))
+ ...
+ S: A142 OK [READ-WRITE] SELECT completed
+
+6. Formal Syntax
+
+ The following syntax specification uses the Augmented Backus-Naur
+ Form (ABNF) notation as specified in [ABNF].
+
+ Non-terminals referenced but not defined below are as defined by
+ [RFC3501], [CONDSTORE], or [IMAPABNF].
+
+ Except as noted otherwise, all alphabetic characters are case-
+ insensitive. The use of upper or lower case characters to define
+ token strings is for editorial clarity only. Implementations MUST
+ accept these strings in a case-insensitive fashion.
+
+
+
+
+
+
+Melnikov, et al. Standards Track [Page 19]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+ capability =/ "QRESYNC"
+
+ select-param = "QRESYNC" SP "(" uidvalidity SP
+ mod-sequence-value [SP known-uids]
+ [SP seq-match-data] ")"
+ ;; conforms to the generic select-param
+ ;; syntax defined in [IMAPABNF]
+
+ seq-match-data = "(" known-sequence-set SP known-uid-set ")"
+
+ uidvalidity = nz-number
+
+ known-uids = sequence-set
+ ;; sequence of UIDs, "*" is not allowed
+
+ known-sequence-set = sequence-set
+ ;; set of message numbers corresponding to
+ ;; the UIDs in known-uid-set, in ascending order.
+ ;; * is not allowed.
+
+ known-uid-set = sequence-set
+ ;; set of UIDs corresponding to the messages in
+ ;; known-sequence-set, in ascending order.
+ ;; * is not allowed.
+
+ message-data =/ expunged-resp
+
+ expunged-resp = "VANISHED" [SP "(EARLIER)"] SP known-uids
+
+ rexpunges-fetch-mod = "VANISHED"
+ ;; VANISHED UID FETCH modifier conforms
+ ;; to the fetch-modifier syntax
+ ;; defined in [IMAPABNF]. It is only
+ ;; allowed in the UID FETCH command.
+
+ resp-text-code =/ "CLOSED"
+
+7. Security Considerations
+
+ As always, it is important to thoroughly test clients and servers
+ implementing this extension, as it changes how the server reports
+ expunged messages to the client.
+
+ Security considerations relevant to [CONDSTORE] are relevant to this
+ extension.
+
+ This document doesn't raise any new security concerns not already
+ raised by [CONDSTORE] or [RFC3501].
+
+
+
+Melnikov, et al. Standards Track [Page 20]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+8. IANA Considerations
+
+ IMAP4 capabilities are registered by publishing a standards track or
+ IESG approved experimental RFC. The registry is currently located
+ at:
+
+ http://www.iana.org/assignments/imap4-capabilities
+
+ This document defines the QRESYNC IMAP capability. IANA has added
+ this capability to the registry.
+
+9. Acknowledgments
+
+ Thanks to Steve Hole, Cyrus Daboo, and Michael Wener for encouraging
+ creation of this document.
+
+ Valuable comments, both in agreement and in dissent, were received
+ from Timo Sirainen, Michael Wener, Randall Gellens, Arnt Gulbrandsen,
+ Chris Newman, Peter Coates, Mark Crispin, Elwyn Davies, Dan Karp,
+ Eric Rescorla, and Mike Zraly.
+
+ This document takes substantial text from [RFC3501] by Mark Crispin.
+
+10. References
+
+10.1. Normative References
+
+ [ABNF] Crocker, D. and P. Overell, "Augmented BNF for Syntax
+ Specifications: ABNF", STD 68, RFC 5234, January 2008.
+
+ [CONDSTORE] Melnikov, A. and S. Hole, "IMAP Extension for
+ Conditional STORE Operation or Quick Flag Changes
+ Resynchronization", RFC 4551, June 2006.
+
+ [ENABLE] Gulbrandsen, A., Ed. and A. Melnikov, Ed., "The IMAP
+ ENABLE Extension", RFC 5161, March 2008.
+
+ [IMAPABNF] Melnikov, A. and C. Daboo, "Collected Extensions to
+ IMAP4 ABNF", RFC 4466, April 2006.
+
+ [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
+ Requirement Levels", BCP 14, RFC 2119, March 1997.
+
+ [RFC3501] Crispin, M., "INTERNET MESSAGE ACCESS PROTOCOL - VERSION
+ 4rev1", RFC 3501, March 2003.
+
+ [UIDPLUS] Crispin, M., "Internet Message Access Protocol (IMAP) -
+ UIDPLUS extension", RFC 4315, December 2005.
+
+
+
+Melnikov, et al. Standards Track [Page 21]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+10.2. Informative References
+
+ [IMAP-DISC] Melnikov, A., Ed., "Synchronization Operations For
+ Disconnected Imap4 Clients", RFC 4549, June 2006.
+
+ [UNSELECT] Melnikov, A., "Internet Message Access Protocol (IMAP)
+ UNSELECT command", RFC 3691, February 2004.
+
+Authors' Addresses
+
+ Alexey Melnikov
+ Isode Ltd
+ 5 Castle Business Village
+ 36 Station Road
+ Hampton, Middlesex TW12 2BX
+ UK
+
+ EMail: Alexey.Melnikov@isode.com
+
+
+ Dave Cridland
+ Isode Ltd
+ 5 Castle Business Village
+ 36 Station Road
+ Hampton, Middlesex TW12 2BX
+ UK
+
+ EMail: dave.cridland@isode.com
+
+
+ Corby Wilson
+ Nokia
+ 5 Wayside Rd.
+ Burlington, MA 01803
+ USA
+
+ EMail: corby@computer.org
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Melnikov, et al. Standards Track [Page 22]
+
+RFC 5162 IMAP Quick Mailbox Resync March 2008
+
+
+Full Copyright Statement
+
+ Copyright (C) The IETF Trust (2008).
+
+ This document is subject to the rights, licenses and restrictions
+ contained in BCP 78, and except as set forth therein, the authors
+ retain all their rights.
+
+ This document and the information contained herein are provided on an
+ "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
+ OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
+ THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
+ OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
+ THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
+ WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+
+Intellectual Property
+
+ The IETF takes no position regarding the validity or scope of any
+ Intellectual Property Rights or other rights that might be claimed to
+ pertain to the implementation or use of the technology described in
+ this document or the extent to which any license under such rights
+ might or might not be available; nor does it represent that it has
+ made any independent effort to identify any such rights. Information
+ on the procedures with respect to rights in RFC documents can be
+ found in BCP 78 and BCP 79.
+
+ Copies of IPR disclosures made to the IETF Secretariat and any
+ assurances of licenses to be made available, or the result of an
+ attempt made to obtain a general license or permission for the use of
+ such proprietary rights by implementers or users of this
+ specification can be obtained from the IETF on-line IPR repository at
+ http://www.ietf.org/ipr.
+
+ The IETF invites any interested party to bring to its attention any
+ copyrights, patents or patent applications, or other proprietary
+ rights that may cover technology that may be required to implement
+ this standard. Please address the information to the IETF at
+ ietf-ipr@ietf.org.
+
+
+
+
+
+
+
+
+
+
+
+
+Melnikov, et al. Standards Track [Page 23]
+