summaryrefslogtreecommitdiff
path: root/imap/docs/rfc/rfc3656.txt
diff options
context:
space:
mode:
authorEduardo Chappa <echappa@gmx.com>2013-02-03 00:59:38 -0700
committerEduardo Chappa <echappa@gmx.com>2013-02-03 00:59:38 -0700
commit094ca96844842928810f14844413109fc6cdd890 (patch)
treee60efbb980f38ba9308ccb4fb2b77b87bbc115f3 /imap/docs/rfc/rfc3656.txt
downloadalpine-094ca96844842928810f14844413109fc6cdd890.tar.xz
Initial Alpine Version
Diffstat (limited to 'imap/docs/rfc/rfc3656.txt')
-rw-r--r--imap/docs/rfc/rfc3656.txt1067
1 files changed, 1067 insertions, 0 deletions
diff --git a/imap/docs/rfc/rfc3656.txt b/imap/docs/rfc/rfc3656.txt
new file mode 100644
index 00000000..6c0ab5b1
--- /dev/null
+++ b/imap/docs/rfc/rfc3656.txt
@@ -0,0 +1,1067 @@
+
+
+
+
+
+
+Network Working Group R. Siemborski
+Request for Comments: 3656 Carnegie Mellon University
+Category: Experimental December 2003
+
+
+ The Mailbox Update (MUPDATE)
+ Distributed Mailbox Database Protocol
+
+Status of this Memo
+
+ This memo defines an Experimental Protocol for the Internet
+ community. It does not specify an Internet standard of any kind.
+ Discussion and suggestions for improvement are requested.
+ Distribution of this memo is unlimited.
+
+Copyright Notice
+
+ Copyright (C) The Internet Society (2003). All Rights Reserved.
+
+Abstract
+
+ As the demand for high-performance mail delivery agents increases, it
+ becomes apparent that single-machine solutions are inadequate to the
+ task, both because of capacity limits and that the failure of the
+ single machine means a loss of mail delivery for all users. It is
+ preferable to allow many machines to share the responsibility of mail
+ delivery.
+
+ The Mailbox Update (MUPDATE) protocol allows a group of Internet
+ Message Access Protocol (IMAP) or Post Office Protocol - Version 3
+ (POP3) servers to function with a unified mailbox namespace. This
+ document is intended to serve as a reference guide to that protocol.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Siemborski Experimental [Page 1]
+
+RFC 3656 MUPDATE Distributed Mailbox Database Protocol December 2003
+
+
+Table of Contents
+
+ 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
+ 2. Protocol Overview . . . . . . . . . . . . . . . . . . . . . . 3
+ 2.1. Atoms . . . . . . . . . . . . . . . . . . . . . . . . . 4
+ 2.2. Strings . . . . . . . . . . . . . . . . . . . . . . . . 4
+ 3. Server Responses . . . . . . . . . . . . . . . . . . . . . . 4
+ 3.1. Response: OK . . . . . . . . . . . . . . . . . . . . . 5
+ 3.2. Response: NO . . . . . . . . . . . . . . . . . . . . . 5
+ 3.3. Response: BAD . . . . . . . . . . . . . . . . . . . . . 5
+ 3.4. Response: BYE . . . . . . . . . . . . . . . . . . . . . 6
+ 3.5. Response: RESERVE . . . . . . . . . . . . . . . . . . . 6
+ 3.6. Response: MAILBOX . . . . . . . . . . . . . . . . . . . 6
+ 3.7. Response: DELETE . . . . . . . . . . . . . . . . . . . 7
+ 3.8. Server Capability Response. . . . . . . . . . . . . . . 7
+ 4. Client Commands . . . . . . . . . . . . . . . . . . . . . . . 8
+ 4.1. Command: ACTIVATE . . . . . . . . . . . . . . . . . . . 8
+ 4.2. Command: AUTHENTICATE . . . . . . . . . . . . . . . . . 8
+ 4.3. Command: DEACTIVATE . . . . . . . . . . . . . . . . . . 9
+ 4.4. Command: DELETE . . . . . . . . . . . . . . . . . . . . 9
+ 4.5. Command: FIND . . . . . . . . . . . . . . . . . . . . . 9
+ 4.6. Command: LIST . . . . . . . . . . . . . . . . . . . . . 10
+ 4.7. Command: LOGOUT . . . . . . . . . . . . . . . . . . . . 10
+ 4.8. Command: NOOP . . . . . . . . . . . . . . . . . . . . . 10
+ 4.9. Command: RESERVE. . . . . . . . . . . . . . . . . . . . 10
+ 4.10. Command: STARTTLS . . . . . . . . . . . . . . . . . . . 11
+ 4.11. Command: UPDATE . . . . . . . . . . . . . . . . . . . . 12
+ 5. MUPDATE Formal Syntax . . . . . . . . . . . . . . . . . . . . 12
+ 6. MUPDATE URL Scheme. . . . . . . . . . . . . . . . . . . . . . 14
+ 6.1. MUPDATE URL Scheme Registration Form. . . . . . . . . . 14
+ 7. Security Considerations . . . . . . . . . . . . . . . . . . . 15
+ 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 16
+ 9. Intellectual Property Rights. . . . . . . . . . . . . . . . . 16
+ 10. References. . . . . . . . . . . . . . . . . . . . . . . . . . 17
+ 10.1. Normative References. . . . . . . . . . . . . . . . . . 17
+ 10.2. Informative References. . . . . . . . . . . . . . . . . 17
+ 11. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 18
+ 12. Author's Address. . . . . . . . . . . . . . . . . . . . . . . 18
+ 13. Full Copyright Statement. . . . . . . . . . . . . . . . . . . 19
+
+
+
+
+
+
+
+
+
+
+
+
+Siemborski Experimental [Page 2]
+
+RFC 3656 MUPDATE Distributed Mailbox Database Protocol December 2003
+
+
+1. Introduction
+
+ In order to support an architecture where there are multiple [IMAP,
+ POP3] servers sharing a common mailbox database, it is necessary to
+ be able to provide atomic mailbox operations, as well as offer
+ sufficient guarantees about database consistency.
+
+ The primary goal of the MUPDATE protocol is to be simple to implement
+ yet allow for database consistency between participants.
+
+ The key words "MUST, "MUST NOT", "REQUIRED", "SHOULD", "SHOULD NOT",
+ "RECOMMENDED", and "MAY" in this document are to be interpreted as
+ defined in BCP 14, RFC 2119 [KEYWORDS].
+
+ In examples, "C:" and "S:" indicate lines sent by the client and
+ server respectively.
+
+2. Protocol Overview
+
+ The MUPDATE protocol assumes a reliable data stream such as a TCP
+ network connection. IANA has registered port 3905 with a short name
+ of "mupdate" for this purpose.
+
+ In the current implementation of the MUPDATE protocol there are three
+ types of participants: a single master server, slave (or replica)
+ servers, and clients. The master server maintains an authoritative
+ copy of the mailbox database. Slave servers connect to the MUPDATE
+ master server as clients, and function as replicas from the point of
+ view of end clients. End clients may connect to either the master or
+ any slave and perform searches against the database, however
+ operations that change the database can only be performed against the
+ master. For the purposes of protocol discussion we will consider a
+ slave's connection to the master identical to that of any other
+ client.
+
+ After connection, all commands from a client to server must have an
+ associated unique tag which is an alphanumeric string. Commands MAY
+ be pipelined from the client to the server (that is, the client need
+ not wait for the response before sending the next command). The
+ server MUST execute the commands in the order they were received,
+ however.
+
+ If the server supports an inactivity login timeout, it MUST be at
+ least 15 minutes.
+
+
+
+
+
+
+
+Siemborski Experimental [Page 3]
+
+RFC 3656 MUPDATE Distributed Mailbox Database Protocol December 2003
+
+
+ MUPDATE uses data formats similar to those used in [ACAP]. That is,
+ atoms and strings. All commands and tags in the protocol are
+ transmitted as atoms. All other data is considered to a string, and
+ must be quoted or transmitted as a literal.
+
+ Outside of a literal, both clients and servers MUST support line
+ lengths of at least 1024 octets (including the trailing CR and LF
+ characters). If a line of a longer length must be transmitted,
+ implementations MUST make use of literals to do so.
+
+2.1. Atoms
+
+ An atom consists of one or more alphanumeric characters. Atoms MUST
+ be less than 15 octets in length.
+
+2.2. Strings
+
+ As in [ACAP], a string may be either literal or a quoted string. A
+ literal is a sequence of zero or more octets (including CR and LF),
+ prefix-quoted with an octet count in the form of an open brace ("{"),
+ the number of octets, an optional plus sign to indicate that the data
+ follows immediately (a non-synchronized literal), a close brace
+ ("}"), and a CRLF sequence. If the plus sign is omitted (a
+ synchronized literal), then the receiving side MUST send a "+ go
+ ahead" response, and the sending side MUST wait for this response.
+ Servers MUST support literals of atleast 4096 octets.
+
+ Strings that are sent from server to client SHOULD NOT be in the
+ synchronized literal format.
+
+ A quoted string is a sequence of zero or more 7-bit characters,
+ excluding CR, LF, and the double quote (<">), with double quote
+ characters at each end.
+
+ The empty string is represented as either "" (a quoted string with
+ zero characters between double quotes) or as {0} followed by CRLF (a
+ literal with an octet count of 0).
+
+3. Server Responses
+
+ Every client command in the MUPDATE protocol may receive one or more
+ tagged responses from the server. Each response is preceded by the
+ same tag as the command that elicited the response from the server.
+
+
+
+
+
+
+
+
+Siemborski Experimental [Page 4]
+
+RFC 3656 MUPDATE Distributed Mailbox Database Protocol December 2003
+
+
+3.1. Response: OK
+
+ A tagged OK response indicates that the operation completed
+ successfully. There is a mandatory implementation-defined string
+ after the OK response. This response also indicates the beginning of
+ the streaming update mode when given in response to an UPDATE
+ command.
+
+ Example:
+
+C: N01 NOOP
+S: N01 OK "NOOP Complete"
+
+3.2. Response: NO
+
+ A tagged NO response indicates that the operation was explicitly
+ denied by the server or otherwise failed. There is a mandatory
+ implementation-defined string after the NO response that SHOULD
+ explain the reason for denial.
+
+ Example:
+
+C: A01 AUTHENTICATE "PLAIN"
+S: A01 NO "PLAIN is not a supported SASL mechanism"
+
+3.3. Response: BAD
+
+ A tagged BAD response indicates that the command from the client
+ could not be parsed or understood. There is a mandatory
+ implementation-defined string after the BAD response to provide
+ additional information about the error. Note that untagged BAD
+ responses are allowed if it is unclear what the tag for a given
+ command is (for example, if a blank line is received by the mupdate
+ server, it can generate an untagged BAD response). In the case of an
+ untagged response, the tag should be replaced with a "*".
+
+ Example:
+
+C: C01 SELECT "INBOX"
+S: C01 BAD "This is not an IMAP server"
+C:
+S: * BAD "Need Command"
+
+
+
+
+
+
+
+
+
+Siemborski Experimental [Page 5]
+
+RFC 3656 MUPDATE Distributed Mailbox Database Protocol December 2003
+
+
+3.4. Response: BYE
+
+ A tagged BYE response indicates that the server has decided to close
+ the connection. There is a mandatory implementation-defined string
+ after the BYE response that SHOULD explain the reason for closing the
+ connection. The server MUST close the connection immediately after
+ transmitting the BYE response.
+
+ Example:
+
+C: L01 LOGOUT
+S: L01 BYE "User Logged Out"
+
+3.5. Response: RESERVE
+
+ A tagged RESERVE response may only be given in response to a FIND,
+ LIST, or UPDATE command. It includes two parameters: the name of the
+ mailbox that is being reserved (in mUTF-7 encoding, as specified in
+ [IMAP]) and a location string whose contents is defined by the
+ clients that are using the database, though it is RECOMMENDED that
+ the format of this string be the hostname of the server which is
+ storing the mailbox.
+
+ This response indicates that the given name is no longer available in
+ the namespace, though it does not indicate that the given mailbox is
+ available to clients at the current time.
+
+ Example:
+
+S: U01 RESERVE "internet.bugtraq" "mail2.example.org"
+
+3.6. Response: MAILBOX
+
+ A tagged MAILBOX response may only be given in response to a FIND,
+ LIST, or UPDATE command. It includes three parameters: the name of
+ the mailbox, a location string (as with RESERVE), and a client-
+ defined string that specifies the IMAP ACL [IMAP-ACL] of the mailbox.
+ This message indicates that the given mailbox is ready to be accessed
+ by clients.
+
+ Example:
+
+S: U01 MAILBOX "internet.bugtraq" "mail2.example.org" "anyone rls"
+
+
+
+
+
+
+
+
+Siemborski Experimental [Page 6]
+
+RFC 3656 MUPDATE Distributed Mailbox Database Protocol December 2003
+
+
+3.7. Response: DELETE
+
+ A tagged DELETE response may only be given in response to an UPDATE
+ command, and MUST NOT be given before the OK response to the UPDATE
+ command is given. It contains a single parameter, that of the
+ mailbox that should be deleted from the slave's database. This
+ response indicates that the given mailbox no longer exists in the
+ namespace of the database, and may be given for any mailbox name,
+ active, reserved, or nonexistent. (Though implementations SHOULD NOT
+ issue DELETE responses for nonexistent mailboxes).
+
+ Example:
+
+S: U01 DELETE "user.rjs3.sent-mail-jan-2002"
+
+3.8. Server Capability Response
+
+ Upon connection of the client to the server, and directly following a
+ successful STARTTLS command, the server MUST issue a capabilities
+ banner, of the following format:
+
+ The banner MUST contain a line that begins with "* AUTH" and contain
+ a space-separated list of SASL mechanisms that the server will accept
+ for authentication. The mechanism names are transmitted as atoms.
+ Servers MAY advertise no available mechanisms (to indicate that
+ STARTTLS must be completed before authentication may occur). If
+ STARTTLS is not supported by the server, then the line MUST contain
+ at least one mechanism.
+
+ If the banner is being issued without a TLS layer, and the server
+ supports the STARTTLS command, the banner MUST contain the line "*
+ STARTTLS". If the banner is being issued under a TLS layer (or the
+ server does not support STARTTLS), the banner MUST NOT contain this
+ line.
+
+ The last line of the banner MUST start with "* OK MUPDATE" and be
+ followed by four strings: the server's hostname, an implementation-
+ defined string giving the name of the implementation, an
+ implementation-defined string giving the version of the
+ implementation, and a string that indicates if the server is a master
+ or a slave. The master/slave indication MUST be either "(master)" or
+ an MUPDATE URL that defines where the master can be contacted.
+
+ Any unrecognized responses before the "* OK MUPDATE" response MUST be
+ ignored by the client.
+
+
+
+
+
+
+Siemborski Experimental [Page 7]
+
+RFC 3656 MUPDATE Distributed Mailbox Database Protocol December 2003
+
+
+ Example:
+
+S: * AUTH KERBEROS_V4 GSSAPI
+S: * STARTTLS
+S: * OK MUPDATE "mupdate.example.org" "Cyrus" "v2.1.2" "(master)"
+
+4. Client Commands
+
+ The following are valid commands that a client may send to the
+ MUPDATE server: AUTHENTICATE, ACTIVATE, DEACTIVATE, DELETE, FIND,
+ LIST, LOGOUT, NOOP, RESERVE, STARTTLS, and UPDATE.
+
+ Before a successful AUTHENTICATE command has occurred, the server
+ MUST NOT accept any commands except for AUTHENTICATE, STARTTLS, and
+ LOGOUT (and SHOULD reply with a NO response for all other commands).
+
+4.1. Command: ACTIVATE
+
+ The ACTIVATE command has 3 parameters: the mailbox name, its
+ location, and its ACL. This command MUST NOT not be issued to a
+ slave server.
+
+ This command can also be used to update the ACL or location
+ information of a mailbox. Note that it is not a requirement for a
+ mailbox to be reserved (or even exist in the database) for an
+ ACTIVATE command to succeed, implementations MUST allow this behavior
+ as it facilitates synchronization of the database with the current
+ state of the mailboxes.
+
+4.2. Command: AUTHENTICATE
+
+ The AUTHENTICATE command initiates a [SASL] negotiation session
+ between the client and the server. It has two parameters. The first
+ parameter is mandatory, and is a string indicating the desired [SASL]
+ mechanism. The second is a string containing an optional BASE64
+ encoded (as defined in section 6.8 of [MIME]) client first send.
+
+ All of the remaining SASL blobs that are sent MUST be sent across the
+ wire must be in BASE64 encoded format, and followed by a CR and LF
+ combination. They MUST NOT be encoded as strings.
+
+ Clients may cancel authentication by sending a * followed by a CR and
+ LF.
+
+ The [SASL] service name for the MUPDATE protocol is "mupdate".
+ Implementations are REQUIRED to implement the GSSAPI [SASL]
+ mechanism, though they SHOULD implement as many mechanisms as
+ possible.
+
+
+
+Siemborski Experimental [Page 8]
+
+RFC 3656 MUPDATE Distributed Mailbox Database Protocol December 2003
+
+
+ If a security layer is negotiated, it should be used directly
+ following the CR and LF combination at the end of the server's OK
+ response (i.e., beginning with the client's next command) Only one
+ successful AUTHENTICATE command may be issued per session.
+
+4.3. Command: DEACTIVATE
+
+ The DEACTIVATE command takes two parameters, the mailbox name and
+ location data. The mailbox MUST already exist and be activated on
+ the MUPDATE server. If the server responds OK, then the mailbox name
+ has been moved to the RESERVE state. If the server responds NO, then
+ the mailbox name has not been moved (for example, the mailbox was not
+ already active). Any ACL information that is known about the mailbox
+ MAY be lost when a DEACTIVATE succeeds. This command MUST NOT be
+ issued to a slave.
+
+ Example:
+
+C: A01 DEACTIVATE "user.rjs3.new" "mail3.example.org!u4"
+S: A01 OK "Mailbox Reserved."
+
+4.4. Command: DELETE
+
+ The DELETE command takes only a single parameter, the mailbox name to
+ be removed from the database's namespace. The server SHOULD give a
+ NO response if the mailbox does not exist. This command MUST NOT be
+ issued to a slave server.
+
+4.5. Command: FIND
+
+ The FIND command takes a single parameter, a mailbox name. The
+ server then responds with the current record for the given mailbox,
+ if any, and an OK response.
+
+ Example (mailbox does not exist):
+
+C: F01 FIND "user.rjs3.xyzzy"
+S: F01 OK "Search Complete"
+
+ Example (mailbox is reserved):
+
+C: F01 FIND "user.rjs3"
+S: F01 RESERVE "user.rjs3" "mail4.example.org"
+S: F01 OK "Search Complete"
+
+
+
+
+
+
+
+Siemborski Experimental [Page 9]
+
+RFC 3656 MUPDATE Distributed Mailbox Database Protocol December 2003
+
+
+4.6. Command: LIST
+
+ The LIST command is similar to running FIND across the entire
+ database. The LIST command takes a single optional parameter, which
+ is a prefix to try to match against the location field of the
+ records. Without the parameter, LIST returns every record in the
+ database.
+
+ For each mailbox that matches, either a MAILBOX or a RESERVE response
+ (as applicable) is sent to the client. When all responses are
+ complete, an OK response is issued.
+
+ Example:
+
+C: L01 LIST
+S: L01 RESERVE "user.rjs3" "mail4.example.org!u2"
+S: L01 MAILBOX "user.leg" "mail2.example.org!u1" "leg lrswipcda"
+S: L01 OK "List Complete"
+C: L02 LIST "mail4.example.org!"
+S: L02 RESERVE "user.rjs3" "mail4.example.org!u2"
+S: L02 OK "List Complete"
+
+4.7. Command: LOGOUT
+
+ The LOGOUT command tells the server to close the connection. Its
+ only valid response is the BYE response. The LOGOUT command takes no
+ parameters.
+
+4.8. Command: NOOP
+
+ The NOOP command takes no parameters. Provided the client is
+ authenticated, its only acceptable response is an OK. Any idle
+ timeouts that the server may have on the connection SHOULD be reset
+ upon receipt of this command.
+
+ If this command is issued after an UPDATE command has been issued,
+ then the OK response also indicates that all pending database updates
+ have been sent to the client. That is, the slave can guarantee that
+ its local database is up to date as of a certain time by issuing a
+ NOOP and waiting for the OK. The OK MUST NOT return until all
+ updates that were pending at the time of the NOOP have been sent.
+
+4.9. Command: RESERVE
+
+ The RESERVE command takes two parameters (just like the RESERVE
+ response), the mailbox name to reserve and location data. If the
+ server responds OK, then the mailbox name has been reserved. If the
+ server responds NO, then the mailbox name has not been reserved (for
+
+
+
+Siemborski Experimental [Page 10]
+
+RFC 3656 MUPDATE Distributed Mailbox Database Protocol December 2003
+
+
+ example, another server has reserved it already). This command MUST
+ NOT be issued to a slave.
+
+ The typical sequence for mailbox creation is:
+
+C: R01 RESERVE "user.rjs3.new" "mail3.example.org!u4"
+S: R01 OK "Mailbox Reserved."
+<client does local mailbox create operations>
+C: A01 ACTIVATE "user.rjs3.new" "mail3.example.org!u4" "rjs3 lrswipcda"
+S: A01 OK "Mailbox Activated."
+
+4.10. Command: STARTTLS
+
+ The STARTTLS command requests the commencement of a [TLS]
+ negotiation. The negotiation begins immediately after the CRLF in
+ the OK response. After a client issues a STARTTLS command, it MUST
+ NOT issue further commands until a server response is seen and the
+ [TLS] negotiation is complete.
+
+ The STARTTLS command is only valid in non-authenticated state. The
+ server remains in non-authenticated state, even if client credentials
+ are supplied during the [TLS] negotiation. The [SASL] EXTERNAL
+ mechanism MAY be used to authenticate once [TLS] client credentials
+ are successfully exchanged. Note that servers are not required to
+ support the EXTERNAL mechanism.
+
+ After the [TLS] layer is established, the server MUST re-issue the
+ initial response banner (see Section 3.8). This is necessary to
+ protect against man-in-the-middle attacks which alter the
+ capabilities list prior to STARTTLS, as well as to advertise any new
+ SASL mechanisms (or other capabilities) that may be available under
+ the layer. The client MUST discard cached capability information and
+ replace it with the new information.
+
+ After the a successful STARTTLS command, the server SHOULD return a
+ NO response to additional STARTTLS commands.
+
+ Servers MAY choose to not implement STARTTLS. In this case, they
+ MUST NOT advertise STARTTLS in their capabilities banner, and SHOULD
+ return a BAD response to the STARTTLS command, if it is issued.
+
+ Example:
+
+C: S01 STARTTLS
+S: S01 OK "Begin TLS negotiation now"
+<TLS negotiation, further commands are under TLS layer>
+S: * AUTH KERBEROS_V4 GSSAPI PLAIN
+S: * OK MUPDATE "mupdate.example.org" "Cyrus" "v2.1.2" "(master)"
+
+
+
+Siemborski Experimental [Page 11]
+
+RFC 3656 MUPDATE Distributed Mailbox Database Protocol December 2003
+
+
+4.11. Command: UPDATE
+
+ The UPDATE command is how a slave initializes an update stream from
+ the master (though it is also valid to issue this command to a
+ slave). In response to the command, the server returns a list of all
+ mailboxes in its database (the same results as a parameterless LIST
+ command) followed by an OK response. From this point forward,
+ whenever an update occurs to the master database, it MUST stream the
+ update to the slave within 30 seconds. That is, it will send
+ RESERVE, MAILBOX, or DELETE responses as they are applicable.
+
+ After a client has issued an UPDATE command, it may only issue NOOP
+ and LOGOUT commands for the remainder of the session.
+
+ Example:
+
+C: U01 UPDATE
+S: U01 MAILBOX "user.leg" "mail2.example.org!u1" "leg lrswipcda"
+S: U01 MAILBOX "user.rjs3" "mail3.example.org!u4" "rjs3 lrswipcda"
+S: U01 RESERVE "internet.bugtraq" "mail1.example.org!u5" "anyone lrs"
+S: U01 OK "Streaming Begins"
+<some time goes by, and another client creates a new mailbox>
+S: U01 RESERVE "user.leg.new" "mail2.example.org!u1"
+<some more time passes, and the create succeeds>
+S: U01 MAILBOX "user.leg.new" "mail2.example.org!u1" "leg lrswipcda"
+<much more time passes, and the slave decides to send a NOOP to reset
+its inactivity timer>
+C: N01 NOOP
+S: U01 DELETE "user.leg.new"
+S: N01 OK "NOOP Complete"
+
+5. MUPDATE Formal Syntax
+
+ The following syntax specification uses the Augmented Backus-Naur
+ Form (ABNF) notation as specified in [ABNF]. This uses the ABNF core
+ rules as specified in Appendix A of [ABNF].
+
+ Except as noted otherwise, all alphabetic characters are case-
+ insensitive. The use of upper or lower case characters to define
+ token strings is for editorial clarity only. Implementations MUST
+ accept these strings in a case-insensitive fashion.
+
+ Note that this specification also uses some terminals from section 8
+ of [ACAP].
+
+ cmd-activate = "ACTIVATE" SP string SP string SP string
+
+ cmd-authenticate = "AUTHENTICATE" SP sasl-mech [ SP string ]
+
+
+
+Siemborski Experimental [Page 12]
+
+RFC 3656 MUPDATE Distributed Mailbox Database Protocol December 2003
+
+
+ cmd-delete = "DELETE" SP string
+
+ cmd-find = "FIND" SP string
+
+ cmd-list = "LIST" [ SP string ]
+
+ cmd-logout = "LOGOUT"
+
+ cmd-noop = "NOOP"
+
+ cmd-reserve = "RESERVE" SP string SP string
+
+ cmd-starttls = "STARTTLS"
+
+ cmd-update = "UPDATE"
+
+ command = tag SP command-type CRLF
+
+ command-type = cmd-activate / cmd-authenticate / cmd-delete /
+ cmd-find / cmd-list / cmd-logout / cmd-noop /
+ cmd-reserve / cmd-starttls / cmd-update
+
+ response = tag SP response-type CRLF
+
+ response-type = rsp-ok / rsp-no / rsp-bad / rsp-bye / rsp-mailbox /
+ rsp-reserve / rsp-delete
+
+ rsp-bad = "BAD" SP string
+
+ rsp-bye = "BYE" SP string
+
+ rsp-mailbox = "MAILBOX" SP string SP string SP string
+
+ rsp-no = "NO" SP string
+
+ rsp-ok = "OK" SP string
+
+ rsp-reserve = "RESERVE" SP string SP string
+
+ rsp-delete = "DELETE" SP string
+
+ sasl-mech = 1*ATOM-CHAR
+ ; ATOM-CHAR is defined in [ACAP]
+
+ string = quoted / literal
+ ; quoted and literal are defined in [ACAP]
+
+
+
+
+
+Siemborski Experimental [Page 13]
+
+RFC 3656 MUPDATE Distributed Mailbox Database Protocol December 2003
+
+
+ tag = 1*ATOM-CHAR
+ ; ATOM-CHAR is defined in [ACAP]
+
+6. MUPDATE URL Scheme
+
+ This document defines the a URL scheme for the purposes of
+ referencing MUPDATE resources, according to the requirements in
+ [RFC2717]. This includes both MUPDATE servers as a whole, along with
+ individual mailbox entries on a given MUPDATE server.
+
+ There is no MIME type associated with these resources. It is
+ intended that a URL consumer would either retrieve the MUPDATE record
+ in question, or simply connect to the MUPDATE server running on the
+ specified host. Note that the consumer will need to have
+ authentication credentials for the specified host.
+
+ The MUPDATE URL scheme is similar to the IMAP URL scheme [IMAP-URL].
+ However, it only takes one of two possible forms:
+
+ mupdate://<iserver>/
+ mupdate://<iserver>/<mailbox>
+
+ The first form refers to a MUPDATE server as a whole, the second form
+ indicates both the server and a mailbox to run a FIND against once
+ authenticated to the server. Note that part of <iserver> may include
+ username and authentication information along with a hostname and
+ port.
+
+6.1. MUPDATE URL Scheme Registration Form
+
+ URL scheme name: "mupdate"
+
+ URL scheme syntax:
+
+ This defines the MUPDATE URL Scheme in [ABNF]. Terminals from the
+ BNF of IMAP URLs [IMAP-URL] are also used.
+
+ mupdateurl = "mupdate://" iserver "/" [ enc_mailbox ]
+ ; iserver and enc_mailbox are as defined in [IMAP-URL]
+
+ Character encoding considerations:
+
+ Identical to those described in [IMAP-URL] for the appropriate
+ terminals.
+
+
+
+
+
+
+
+Siemborski Experimental [Page 14]
+
+RFC 3656 MUPDATE Distributed Mailbox Database Protocol December 2003
+
+
+ Intended Usage:
+
+ The form of the URL without an associated mailbox is intended to
+ designate a MUPDATE server only. If a mailbox name is included in
+ the URL, then the consumer is expected to execute a FIND command
+ for that mailbox on the specified server.
+
+ Applications and/or protocols which use this URL scheme name:
+
+ The protocol described in this document.
+
+ Interoperability Considerations:
+
+ None.
+
+ Security Considerations:
+
+ Users of the MUPDATE URL Scheme should review the security
+ considerations that are discussed in [IMAP-URL]. In particular,
+ the consequences of including authentication mechanism information
+ in a URL should be reviewed.
+
+ Relevant Publications:
+
+ This document and [IMAP-URL].
+
+ Author, Change Controller, and Contact for Further Information:
+
+ Author of this document.
+
+7. Security Considerations
+
+ While no unauthenticated users may make modifications or even perform
+ searches on the database, it is important to note that this
+ specification assumes no protections of any type for authenticated
+ users.
+
+ All authenticated users have complete access to the database. For
+ this reason it is important to ensure that accounts that are making
+ use of the database are well secured.
+
+ A more secure deployment might have all read only access go through a
+ slave, and only have accounts which need write access use the master.
+ This has the disadvantage of a marginally longer time for updates to
+ reach the clients.
+
+
+
+
+
+
+Siemborski Experimental [Page 15]
+
+RFC 3656 MUPDATE Distributed Mailbox Database Protocol December 2003
+
+
+ The protocol assumes that all authenticated users are cooperating to
+ maintain atomic operations. Therefore, all new mailboxes SHOULD be
+ RESERVEd before they are ACTIVATEd, despite the fact that the
+ protocol does not require this, and it is therefore possible for a
+ set of participants which do not obey the provided locking to create
+ an inconsistent database. RESERVEing the mailbox first is not
+ required to perform an activate because this behavior simplifies
+ synchronization with the actual location of the mailboxes.
+
+8. IANA Considerations
+
+ The IANA has assigned TCP port number 3905 to "mupdate".
+
+ The IANA has registered a URL scheme for the MUPDATE protocol, as
+ defined in section 6.1 of this document.
+
+ IANA has registered a GSSAPI service name of "mupdate" for the
+ MUPDATE protocol in the registry maintained at:
+
+ http://www.iana.org/assignments/gssapi-service-names
+
+9. Intellectual Property Rights
+
+ The IETF takes no position regarding the validity or scope of any
+ intellectual property or other rights that might be claimed to
+ pertain to the implementation or use of the technology described in
+ this document or the extent to which any license under such rights
+ might or might not be available; neither does it represent that it
+ has made any effort to identify any such rights. Information on the
+ IETF's procedures with respect to rights in standards-track and
+ standards-related documentation can be found in BCP-11. Copies of
+ claims of rights made available for publication and any assurances of
+ licenses to be made available, or the result of an attempt made to
+ obtain a general license or permission for the use of such
+ proprietary rights by implementors or users of this specification can
+ be obtained from the IETF Secretariat.
+
+ The IETF invites any interested party to bring to its attention any
+ copyrights, patents or patent applications, or other proprietary
+ rights which may cover technology that may be required to practice
+ this standard. Please address the information to the IETF Executive
+ Director.
+
+
+
+
+
+
+
+
+
+Siemborski Experimental [Page 16]
+
+RFC 3656 MUPDATE Distributed Mailbox Database Protocol December 2003
+
+
+10. References
+
+10.1. Normative References
+
+ [KEYWORDS] Bradner, S., "Key words for use in RFCs to Indicate
+ Requirement Levels", BCP 14, RFC 2119, March 1997.
+
+ [IMAP] Crispin, M., "Internet Message Access Protocol - Version
+ 4", RFC 3501, March 2003.
+
+ [ABNF] Crocker, D., Ed. and P. Overell, "Augmented BNF for
+ Syntax Specifications: ABNF", RFC 2234, November 1997.
+
+ [MIME] Freed, N. and N. Bornstein, "Multipurpose Internet Mail
+ Extensions (MIME) Part One: Format of Internet Message
+ Bodies", RFC 2045, November 1996.
+
+ [IMAP-ACL] Myers, J., "IMAP4 ACL extension", RFC 2086, January 1997.
+
+ [SASL] Myers, J., "Simple Authentication and Security Layer
+ (SASL)", RFC 2222, October 1997.
+
+ [IMAP-URL] Newman, C., "IMAP URL Scheme", RFC 2192, September 1997.
+
+ [ACAP] Newman, C. and J. Myers, "ACAP -- Application
+ Configuration Access Protocol", RFC 2244, November 1997.
+
+ [TLS] Dierks, T. and C. Allen, "The TLS Protocol Version 1.0",
+ RFC 2246, January 1999.
+
+10.2. Informative References
+
+ [POP3] Myers, J. and M. Rose, "Post Office Protocol - Version
+ 3", STD 53, RFC 1939, May 1996.
+
+ [RFC2717] Petke, R. and I. King, "Registration Procedures for URL
+ Scheme Names", BCP 35, RFC 2717, November 1999.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Siemborski Experimental [Page 17]
+
+RFC 3656 MUPDATE Distributed Mailbox Database Protocol December 2003
+
+
+11. Acknowledgments
+
+ Lawrence Greenfield and Ken Murchison, for a great deal of input on
+ both the protocol and the text of the documents.
+
+12. Author's Address
+
+ Robert Siemborski
+ Carnegie Mellon, Andrew Systems Group
+ Cyert Hall 207
+ 5000 Forbes Avenue
+ Pittsburgh, PA 15213
+
+ Phone: (412) 268-7456
+ EMail: rjs3+@andrew.cmu.edu
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Siemborski Experimental [Page 18]
+
+RFC 3656 MUPDATE Distributed Mailbox Database Protocol December 2003
+
+
+13. Full Copyright Statement
+
+ Copyright (C) The Internet Society (2003). All Rights Reserved.
+
+ This document and translations of it may be copied and furnished to
+ others, and derivative works that comment on or otherwise explain it
+ or assist in its implementation may be prepared, copied, published
+ and distributed, in whole or in part, without restriction of any
+ kind, provided that the above copyright notice and this paragraph are
+ included on all such copies and derivative works. However, this
+ document itself may not be modified in any way, such as by removing
+ the copyright notice or references to the Internet Society or other
+ Internet organizations, except as needed for the purpose of
+ developing Internet standards in which case the procedures for
+ copyrights defined in the Internet Standards process must be
+ followed, or as required to translate it into languages other than
+ English.
+
+ The limited permissions granted above are perpetual and will not be
+ revoked by the Internet Society or its successors or assignees.
+
+ This document and the information contained herein is provided on an
+ "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
+ TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
+ BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
+ HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
+ MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+
+Acknowledgement
+
+ Funding for the RFC Editor function is currently provided by the
+ Internet Society.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Siemborski Experimental [Page 19]
+