summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--.gitignore3
-rw-r--r--Bewegungsmelder.asm22
-rw-r--r--Makefile12
-rw-r--r--tn24def.inc673
4 files changed, 699 insertions, 11 deletions
diff --git a/.gitignore b/.gitignore
index 0f3a6b1..22acbed 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1,2 +1,5 @@
Debug
Release
+*.o
+*.elf
+*.hex
diff --git a/Bewegungsmelder.asm b/Bewegungsmelder.asm
index a87f8d0..4979236 100644
--- a/Bewegungsmelder.asm
+++ b/Bewegungsmelder.asm
@@ -9,14 +9,14 @@
; auf internen 128kHz-Oszillator stellen!
-.DEF statusBits = r25 ; 0: hell, 1: akku voll, 2: akku nicht leer
-.EQU hellBit = 0
-.EQU akkuVollBit = 1
-.EQU akkuNLeerBit = 2
-.EQU hellSpannung = 0x80 ; Schwellwert, ab dem es hell ist
-.EQU akkuVollSpannung = 0xb9 ; Schwellwert, ab dem der Akku voll ist (= 14,4V)
-.EQU akkuLeerSpannung = 0x99 ; Schwellwert, ab dem der Akku leer ist (= 12,0V)
-.EQU zaehlerschritte = 0xffff - 0x2d00 ; 90s?
+.EQU statusBits, 25 ; 0: hell, 1: akku voll, 2: akku nicht leer
+.EQU hellBit, 0
+.EQU akkuVollBit, 1
+.EQU akkuNLeerBit, 2
+.EQU hellSpannung, 0x80 ; Schwellwert, ab dem es hell ist
+.EQU akkuVollSpannung, 0xb9 ; Schwellwert, ab dem der Akku voll ist (= 14,4V)
+.EQU akkuLeerSpannung, 0x99 ; Schwellwert, ab dem der Akku leer ist (= 12,0V)
+.EQU zaehlerschritte, 0xffff - 0x2d00 ; 90s?
rjmp RESET
reti
@@ -37,7 +37,7 @@
reti
RESET:
- ldi r16,low(RAMEND) ; Stackpointer initialisieren
+ ldi r16,lo8(RAMEND) ; Stackpointer initialisieren
out SPL,r16
sbi DIDR0,ADC0D ; digitalen Eingang an ADC0 (Phototransistor) deaktivieren
@@ -99,8 +99,8 @@ BEWEGUNG_AUSWERTEN:
sbrc statusBits,hellBit ; ist es hell?
rjmp MAINLOOP ; ja!
- ldi r16,high(zaehlerschritte)
- ldi r17,low(zaehlerschritte)
+ ldi r16,hi8(zaehlerschritte)
+ ldi r17,lo8(zaehlerschritte)
out TCNT1H,r16
out TCNT1L,r17 ; Timer/Counter 1 resetten
sbi PORTB,1 ; Licht an!
diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..63c29ed
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,12 @@
+
+all: Bewegungsmelder.hex
+
+%.o: %.asm *.inc
+ avr-as $< -mmcu=attiny24 -o $@
+
+%.elf: %.o
+# cat $< > $@
+ avr-ld -o $@ $<
+
+%.hex: %.elf
+ avr-objcopy --output-target=ihex $< $@
diff --git a/tn24def.inc b/tn24def.inc
new file mode 100644
index 0000000..ba4d286
--- /dev/null
+++ b/tn24def.inc
@@ -0,0 +1,673 @@
+;***** THIS IS A MACHINE GENERATED FILE - DO NOT EDIT ********************
+;***** Created: 2011-02-09 12:04 ******* Source: ATtiny24.xml ************
+;*************************************************************************
+;* A P P L I C A T I O N N O T E F O R T H E A V R F A M I L Y
+;*
+;* Number : AVR000
+;* File Name : "tn24def.inc"
+;* Title : Register/Bit Definitions for the ATtiny24
+;* Date : 2011-02-09
+;* Version : 2.35
+;* Support E-mail : avr@atmel.com
+;* Target MCU : ATtiny24
+;*
+;* DESCRIPTION
+;* When including this file in the assembly program file, all I/O register
+;* names and I/O register bit names appearing in the data book can be used.
+;* In addition, the six registers forming the three data pointers X, Y and
+;* Z have been assigned names XL - ZH. Highest RAM address for Internal
+;* SRAM is also defined
+;*
+;* The Register names are represented by their hexadecimal address.
+;*
+;* The Register Bit names are represented by their bit number (0-7).
+;*
+;* Please observe the difference in using the bit names with instructions
+;* such as "sbr"/"cbr" (set/clear bit in register) and "sbrs"/"sbrc"
+;* (skip if bit in register set/cleared). The following example illustrates
+;* this:
+;*
+;* in r16,PORTB ;read PORTB latch
+;* sbr r16,(1<<PB6)+(1<<PB5) ;set PB6 and PB5 (use masks, not bit#)
+;* out PORTB,r16 ;output to PORTB
+;*
+;* in r16,TIFR ;read the Timer Interrupt Flag Register
+;* sbrc r16,TOV0 ;test the overflow flag (use bit#)
+;* rjmp TOV0_is_set ;jump if set
+;* ... ;otherwise do something else
+;*************************************************************************
+
+#ifndef _TN24DEF_INC_
+#define _TN24DEF_INC_
+
+
+#pragma partinc 0
+
+; ***** SPECIFY DEVICE ***************************************************
+; .DEVICE ATtiny24
+#pragma AVRPART ADMIN PART_NAME ATtiny24
+.equ SIGNATURE_000, 0x1e
+.equ SIGNATURE_001, 0x91
+.equ SIGNATURE_002, 0x0b
+
+#pragma AVRPART CORE CORE_VERSION V2
+#pragma AVRPART CORE NEW_INSTRUCTIONS lpm rd,z+
+
+
+; ***** I/O REGISTER DEFINITIONS *****************************************
+; NOTE:
+; Definitions marked "MEMORY MAPPED"are extended I/O ports
+; and cannot be used with IN/OUT instructions
+.equ SREG, 0x3f
+.equ SPL, 0x3d
+.equ OCR0B, 0x3c
+.equ GIMSK, 0x3b
+.equ GIFR, 0x3a
+.equ TIMSK0, 0x39
+.equ TIFR0, 0x38
+.equ SPMCSR, 0x37
+.equ OCR0A, 0x36
+.equ MCUCR, 0x35
+.equ MCUSR, 0x34
+.equ TCCR0B, 0x33
+.equ TCNT0, 0x32
+.equ OSCCAL, 0x31
+.equ TCCR0A, 0x30
+.equ TCCR1A, 0x2f
+.equ TCCR1B, 0x2e
+.equ TCNT1L, 0x2c
+.equ TCNT1H, 0x2d
+.equ OCR1AL, 0x2a
+.equ OCR1AH, 0x2b
+.equ OCR1BL, 0x28
+.equ OCR1BH, 0x29
+.equ DWDR, 0x27
+.equ CLKPR, 0x26
+.equ ICR1L, 0x24
+.equ ICR1H, 0x25
+.equ GTCCR, 0x23
+.equ TCCR1C, 0x22
+.equ WDTCSR, 0x21
+.equ PCMSK1, 0x20
+.equ EEARH, 0x1f
+.equ EEARL, 0x1e
+.equ EEDR, 0x1d
+.equ EECR, 0x1c
+.equ PORTA, 0x1b
+.equ DDRA, 0x1a
+.equ PINA, 0x19
+.equ PORTB, 0x18
+.equ DDRB, 0x17
+.equ PINB, 0x16
+.equ GPIOR2, 0x15
+.equ GPIOR1, 0x14
+.equ GPIOR0, 0x13
+.equ PCMSK0, 0x12
+.equ USIBR, 0x10
+.equ USIDR, 0x0f
+.equ USISR, 0x0e
+.equ USICR, 0x0d
+.equ TIMSK1, 0x0c
+.equ TIFR1, 0x0b
+.equ ACSR, 0x08
+.equ ADMUX, 0x07
+.equ ADCSRA, 0x06
+.equ ADCH, 0x05
+.equ ADCL, 0x04
+.equ ADCSRB, 0x03
+.equ DIDR0, 0x01
+.equ PRR, 0x00
+
+
+; ***** BIT DEFINITIONS **************************************************
+
+; ***** PORTA ************************
+; PORTA - Port A Data Register
+.equ PORTA0, 0 ; Port A Data Register bit 0
+.equ PA0, 0 ; For compatibility
+.equ PORTA1, 1 ; Port A Data Register bit 1
+.equ PA1, 1 ; For compatibility
+.equ PORTA2, 2 ; Port A Data Register bit 2
+.equ PA2, 2 ; For compatibility
+.equ PORTA3, 3 ; Port A Data Register bit 3
+.equ PA3, 3 ; For compatibility
+.equ PORTA4, 4 ; Port A Data Register bit 4
+.equ PA4, 4 ; For compatibility
+.equ PORTA5, 5 ; Port A Data Register bit 5
+.equ PA5, 5 ; For compatibility
+.equ PORTA6, 6 ; Port A Data Register bit 6
+.equ PA6, 6 ; For compatibility
+.equ PORTA7, 7 ; Port A Data Register bit 7
+.equ PA7, 7 ; For compatibility
+
+; DDRA - Port A Data Direction Register
+.equ DDA0, 0 ; Data Direction Register, Port A, bit 0
+.equ DDA1, 1 ; Data Direction Register, Port A, bit 1
+.equ DDA2, 2 ; Data Direction Register, Port A, bit 2
+.equ DDA3, 3 ; Data Direction Register, Port A, bit 3
+.equ DDA4, 4 ; Data Direction Register, Port A, bit 4
+.equ DDA5, 5 ; Data Direction Register, Port A, bit 5
+.equ DDA6, 6 ; Data Direction Register, Port A, bit 6
+.equ DDA7, 7 ; Data Direction Register, Port A, bit 7
+
+; PINA - Port A Input Pins
+.equ PINA0, 0 ; Input Pins, Port A bit 0
+.equ PINA1, 1 ; Input Pins, Port A bit 1
+.equ PINA2, 2 ; Input Pins, Port A bit 2
+.equ PINA3, 3 ; Input Pins, Port A bit 3
+.equ PINA4, 4 ; Input Pins, Port A bit 4
+.equ PINA5, 5 ; Input Pins, Port A bit 5
+.equ PINA6, 6 ; Input Pins, Port A bit 6
+.equ PINA7, 7 ; Input Pins, Port A bit 7
+
+
+; ***** PORTB ************************
+; PORTB - Data Register, Port B
+.equ PORTB0, 0 ;
+.equ PB0, 0 ; For compatibility
+.equ PORTB1, 1 ;
+.equ PB1, 1 ; For compatibility
+.equ PORTB2, 2 ;
+.equ PB2, 2 ; For compatibility
+.equ PORTB3, 3 ;
+.equ PB3, 3 ; For compatibility
+
+; DDRB - Data Direction Register, Port B
+.equ DDB0, 0 ;
+.equ DDB1, 1 ;
+.equ DDB2, 2 ;
+.equ DDB3, 3 ;
+
+; PINB - Input Pins, Port B
+.equ PINB0, 0 ;
+.equ PINB1, 1 ;
+.equ PINB2, 2 ;
+.equ PINB3, 3 ;
+
+
+; ***** ANALOG_COMPARATOR ************
+; ADCSRB - ADC Control and Status Register B
+.equ ACME, 6 ; Analog Comparator Multiplexer Enable
+
+; ACSR - Analog Comparator Control And Status Register
+.equ ACIS0, 0 ; Analog Comparator Interrupt Mode Select bit 0
+.equ ACIS1, 1 ; Analog Comparator Interrupt Mode Select bit 1
+.equ ACIC, 2 ; Analog Comparator Input Capture Enable
+.equ ACIE, 3 ; Analog Comparator Interrupt Enable
+.equ ACI, 4 ; Analog Comparator Interrupt Flag
+.equ ACO, 5 ; Analog Compare Output
+.equ ACBG, 6 ; Analog Comparator Bandgap Select
+.equ AINBG, ACBG ; For compatibility
+.equ ACD, 7 ; Analog Comparator Disable
+
+; DIDR0 -
+.equ ADC0D, 0 ; ADC 0 Digital input buffer disable
+.equ ADC1D, 1 ; ADC 1 Digital input buffer disable
+
+
+; ***** AD_CONVERTER *****************
+; ADMUX - ADC Multiplexer Selection Register
+.equ MUX0, 0 ; Analog Channel and Gain Selection Bit 0
+.equ MUX1, 1 ; Analog Channel and Gain Selection Bit 1
+.equ MUX2, 2 ; Analog Channel and Gain Selection Bit 2
+.equ MUX3, 3 ; Analog Channel and Gain Selection Bit 3
+.equ MUX4, 4 ; Analog Channel and Gain Selection Bit 4
+.equ MUX5, 5 ; Analog Channel and Gain Selection Bit 5
+.equ REFS0, 6 ; Reference Selection Bit 0
+.equ REFS1, 7 ; Reference Selection Bit 1
+
+; ADCSRA - ADC Control and Status Register A
+.equ ADPS0, 0 ; ADC Prescaler Select Bit 0
+.equ ADPS1, 1 ; ADC Prescaler Select Bit 1
+.equ ADPS2, 2 ; ADC Prescaler Select Bit 2
+.equ ADIE, 3 ; ADC Interrupt Enable
+.equ ADIF, 4 ; ADC Interrupt Flag
+.equ ADATE, 5 ; ADC Auto Trigger Enable
+.equ ADSC, 6 ; ADC Start Conversion
+.equ ADEN, 7 ; ADC Enable
+
+; ADCH - ADC Data Register High Byte
+.equ ADCH0, 0 ; ADC Data Register High Byte Bit 0
+.equ ADCH1, 1 ; ADC Data Register High Byte Bit 1
+.equ ADCH2, 2 ; ADC Data Register High Byte Bit 2
+.equ ADCH3, 3 ; ADC Data Register High Byte Bit 3
+.equ ADCH4, 4 ; ADC Data Register High Byte Bit 4
+.equ ADCH5, 5 ; ADC Data Register High Byte Bit 5
+.equ ADCH6, 6 ; ADC Data Register High Byte Bit 6
+.equ ADCH7, 7 ; ADC Data Register High Byte Bit 7
+
+; ADCL - ADC Data Register Low Byte
+.equ ADCL0, 0 ; ADC Data Register Low Byte Bit 0
+.equ ADCL1, 1 ; ADC Data Register Low Byte Bit 1
+.equ ADCL2, 2 ; ADC Data Register Low Byte Bit 2
+.equ ADCL3, 3 ; ADC Data Register Low Byte Bit 3
+.equ ADCL4, 4 ; ADC Data Register Low Byte Bit 4
+.equ ADCL5, 5 ; ADC Data Register Low Byte Bit 5
+.equ ADCL6, 6 ; ADC Data Register Low Byte Bit 6
+.equ ADCL7, 7 ; ADC Data Register Low Byte Bit 7
+
+; ADCSRB - ADC Control and Status Register B
+.equ ADTS0, 0 ; ADC Auto Trigger Source bit 0
+.equ ADTS1, 1 ; ADC Auto Trigger Source bit 1
+.equ ADTS2, 2 ; ADC Auto Trigger Source bit 2
+.equ ADLAR, 4 ; ADC Left Adjust Result
+.equ BIN, 7 ; Bipolar Input Mode
+
+; DIDR0 - Digital Input Disable Register 0
+;.equ ADC0D = 0 ; ADC0 Digital Input Disable
+;.equ ADC1D = 1 ; ADC1 Digital Input Disable
+.equ ADC2D, 2 ; ADC2 Digital Input Disable
+.equ ADC3D, 3 ; ADC3 Digital Input Disable
+.equ ADC4D, 4 ; ADC4 Digital Input Disable
+.equ ADC5D, 5 ; ADC5 Digital Input Disable
+.equ ADC6D, 6 ; ADC6 Digital Input Disable
+.equ ADC7D, 7 ; ADC7 Digital Input Disable
+
+
+; ***** USI **************************
+; USIBR - USI Buffer Register
+.equ USIBR0, 0 ; USI Buffer Register bit 0
+.equ USIBR1, 1 ; USI Buffer Register bit 1
+.equ USIBR2, 2 ; USI Buffer Register bit 2
+.equ USIBR3, 3 ; USI Buffer Register bit 3
+.equ USIBR4, 4 ; USI Buffer Register bit 4
+.equ USIBR5, 5 ; USI Buffer Register bit 5
+.equ USIBR6, 6 ; USI Buffer Register bit 6
+.equ USIBR7, 7 ; USI Buffer Register bit 7
+
+; USIDR - USI Data Register
+.equ USIDR0, 0 ; USI Data Register bit 0
+.equ USIDR1, 1 ; USI Data Register bit 1
+.equ USIDR2, 2 ; USI Data Register bit 2
+.equ USIDR3, 3 ; USI Data Register bit 3
+.equ USIDR4, 4 ; USI Data Register bit 4
+.equ USIDR5, 5 ; USI Data Register bit 5
+.equ USIDR6, 6 ; USI Data Register bit 6
+.equ USIDR7, 7 ; USI Data Register bit 7
+
+; USISR - USI Status Register
+.equ USICNT0, 0 ; USI Counter Value Bit 0
+.equ USICNT1, 1 ; USI Counter Value Bit 1
+.equ USICNT2, 2 ; USI Counter Value Bit 2
+.equ USICNT3, 3 ; USI Counter Value Bit 3
+.equ USIDC, 4 ; Data Output Collision
+.equ USIPF, 5 ; Stop Condition Flag
+.equ USIOIF, 6 ; Counter Overflow Interrupt Flag
+.equ USISIF, 7 ; Start Condition Interrupt Flag
+
+; USICR - USI Control Register
+.equ USITC, 0 ; Toggle Clock Port Pin
+.equ USICLK, 1 ; Clock Strobe
+.equ USICS0, 2 ; USI Clock Source Select Bit 0
+.equ USICS1, 3 ; USI Clock Source Select Bit 1
+.equ USIWM0, 4 ; USI Wire Mode Bit 0
+.equ USIWM1, 5 ; USI Wire Mode Bit 1
+.equ USIOIE, 6 ; Counter Overflow Interrupt Enable
+.equ USISIE, 7 ; Start Condition Interrupt Enable
+
+
+; ***** EXTERNAL_INTERRUPT ***********
+; MCUCR - MCU Control Register
+.equ ISC00, 0 ; Interrupt Sense Control 0 Bit 0
+.equ ISC01, 1 ; Interrupt Sense Control 0 Bit 1
+
+; GIMSK - General Interrupt Mask Register
+.equ GICR, GIMSK ; For compatibility
+.equ PCIE0, 4 ; Pin Change Interrupt Enable 0
+.equ PCIE1, 5 ; Pin Change Interrupt Enable 1
+.equ INT0, 6 ; External Interrupt Request 0 Enable
+
+; GIFR - General Interrupt Flag register
+.equ PCIF0, 4 ; Pin Change Interrupt Flag 0
+.equ PCIF1, 5 ; Pin Change Interrupt Flag 1
+.equ INTF0, 6 ; External Interrupt Flag 0
+
+; PCMSK1 - Pin Change Enable Mask 1
+.equ PCINT8, 0 ; Pin Change Enable Mask Bit 8
+.equ PCINT9, 1 ; Pin Change Enable Mask Bit 9
+.equ PCINT10, 2 ; Pin Change Enable Mask Bit 10
+.equ PCINT11, 3 ; Pin Change Enable Mask Bit 11
+
+; PCMSK0 - Pin Change Enable Mask 0
+.equ PCINT0, 0 ; Pin Change Enable Mask Bit 0
+.equ PCINT1, 1 ; Pin Change Enable Mask Bit 1
+.equ PCINT2, 2 ; Pin Change Enable Mask Bit 2
+.equ PCINT3, 3 ; Pin Change Enable Mask Bit 3
+.equ PCINT4, 4 ; Pin Change Enable Mask Bit 4
+.equ PCINT5, 5 ; Pin Change Enable Mask Bit 5
+.equ PCINT6, 6 ; Pin Change Enable Mask Bit 6
+.equ PCINT7, 7 ; Pin Change Enable Mask Bit 7
+
+
+; ***** EEPROM ***********************
+; EEARL - EEPROM Address Register Low Byte
+.equ EEAR0, 0 ; EEPROM Read/Write Access Bit 0
+.equ EEAR1, 1 ; EEPROM Read/Write Access Bit 1
+.equ EEAR2, 2 ; EEPROM Read/Write Access Bit 2
+.equ EEAR3, 3 ; EEPROM Read/Write Access Bit 3
+.equ EEAR4, 4 ; EEPROM Read/Write Access Bit 4
+.equ EEAR5, 5 ; EEPROM Read/Write Access Bit 5
+.equ EEAR6, 6 ; EEPROM Read/Write Access Bit 6
+.equ EEAR7, 7 ; EEPROM Read/Write Access Bit 7
+
+; EEARH - EEPROM Address Register High Byte
+.equ EEAR8, 0 ; EEPROM Read/Write Access Bit 0
+
+; EEDR - EEPROM Data Register
+.equ EEDR0, 0 ; EEPROM Data Register bit 0
+.equ EEDR1, 1 ; EEPROM Data Register bit 1
+.equ EEDR2, 2 ; EEPROM Data Register bit 2
+.equ EEDR3, 3 ; EEPROM Data Register bit 3
+.equ EEDR4, 4 ; EEPROM Data Register bit 4
+.equ EEDR5, 5 ; EEPROM Data Register bit 5
+.equ EEDR6, 6 ; EEPROM Data Register bit 6
+.equ EEDR7, 7 ; EEPROM Data Register bit 7
+
+; EECR - EEPROM Control Register
+.equ EERE, 0 ; EEPROM Read Enable
+.equ EEPE, 1 ; EEPROM Write Enable
+.equ EEMPE, 2 ; EEPROM Master Write Enable
+.equ EERIE, 3 ; EEPROM Ready Interrupt Enable
+.equ EEPM0, 4 ; EEPROM Programming Mode Bit 0
+.equ EEPM1, 5 ; EEPROM Programming Mode Bit 1
+
+
+; ***** WATCHDOG *********************
+; WDTCSR - Watchdog Timer Control Register
+.equ WDP0, 0 ; Watch Dog Timer Prescaler bit 0
+.equ WDP1, 1 ; Watch Dog Timer Prescaler bit 1
+.equ WDP2, 2 ; Watch Dog Timer Prescaler bit 2
+.equ WDE, 3 ; Watch Dog Enable
+.equ WDCE, 4 ; Watchdog Change Enable
+.equ WDP3, 5 ; Watchdog Timer Prescaler Bit 3
+.equ WDIE, 6 ; Watchdog Timeout Interrupt Enable
+.equ WDIF, 7 ; Watchdog Timeout Interrupt Flag
+
+
+; ***** TIMER_COUNTER_0 **************
+; TIMSK0 - Timer/Counter Interrupt Mask Register
+.equ TOIE0, 0 ; Timer/Counter0 Overflow Interrupt Enable
+.equ OCIE0A, 1 ; Timer/Counter0 Output Compare Match A Interrupt Enable
+.equ OCIE0B, 2 ; Timer/Counter0 Output Compare Match B Interrupt Enable
+
+; TIFR0 - Timer/Counter0 Interrupt Flag Register
+.equ TOV0, 0 ; Timer/Counter0 Overflow Flag
+.equ OCF0A, 1 ; Timer/Counter0 Output Compare Flag A
+.equ OCF0B, 2 ; Timer/Counter0 Output Compare Flag B
+
+; TCCR0A - Timer/Counter Control Register A
+.equ WGM00, 0 ; Waveform Generation Mode bit 0
+.equ WGM01, 1 ; Waveform Generation Mode bit 1
+.equ COM0B0, 4 ; Compare Match Output B Mode bit 0
+.equ COM0B1, 5 ; Compare Match Output B Mode bit 1
+.equ COM0A0, 6 ; Compare Match Output A Mode bit 0
+.equ COM0A1, 7 ; Compare Match Output A Mode bit 1
+
+; TCCR0B - Timer/Counter Control Register B
+.equ CS00, 0 ; Clock Select bit 0
+.equ CS01, 1 ; Clock Select bit 1
+.equ CS02, 2 ; Clock Select bit 2
+.equ WGM02, 3 ; Waveform Generation Mode bit 2
+.equ FOC0B, 6 ; Force Output Compare B
+.equ FOC0A, 7 ; Force Output Compare A
+
+; TCNT0 - Timer/Counter0
+.equ TCNT0_0, 0 ;
+.equ TCNT0_1, 1 ;
+.equ TCNT0_2, 2 ;
+.equ TCNT0_3, 3 ;
+.equ TCNT0_4, 4 ;
+.equ TCNT0_5, 5 ;
+.equ TCNT0_6, 6 ;
+.equ TCNT0_7, 7 ;
+
+; OCR0A - Timer/Counter0 Output Compare Register A
+.equ OCR0A_0, 0 ;
+.equ OCR0A_1, 1 ;
+.equ OCR0A_2, 2 ;
+.equ OCR0A_3, 3 ;
+.equ OCR0A_4, 4 ;
+.equ OCR0A_5, 5 ;
+.equ OCR0A_6, 6 ;
+.equ OCR0A_7, 7 ;
+
+; OCR0B - Timer/Counter0 Output Compare Register B
+.equ OCR0_0, 0 ;
+.equ OCR0_1, 1 ;
+.equ OCR0_2, 2 ;
+.equ OCR0_3, 3 ;
+.equ OCR0_4, 4 ;
+.equ OCR0_5, 5 ;
+.equ OCR0_6, 6 ;
+.equ OCR0_7, 7 ;
+
+; GTCCR - General Timer/Counter Control Register
+.equ PSR10, 0 ; Prescaler Reset Timer/CounterN
+.equ TSM, 7 ; Timer/Counter Synchronization Mode
+
+
+; ***** TIMER_COUNTER_1 **************
+; TIMSK1 - Timer/Counter1 Interrupt Mask Register
+.equ TOIE1, 0 ; Timer/Counter1 Overflow Interrupt Enable
+.equ OCIE1A, 1 ; Timer/Counter1 Output Compare A Match Interrupt Enable
+.equ OCIE1B, 2 ; Timer/Counter1 Output Compare B Match Interrupt Enable
+.equ ICIE1, 5 ; Timer/Counter1 Input Capture Interrupt Enable
+
+; TIFR1 - Timer/Counter Interrupt Flag register
+.equ TOV1, 0 ; Timer/Counter1 Overflow Flag
+.equ OCF1A, 1 ; Timer/Counter1 Output Compare A Match Flag
+.equ OCF1B, 2 ; Timer/Counter1 Output Compare B Match Flag
+.equ ICF1, 5 ; Timer/Counter1 Input Capture Flag
+
+; TCCR1A - Timer/Counter1 Control Register A
+.equ WGM10, 0 ; Pulse Width Modulator Select Bit 0
+.equ PWM10, WGM10 ; For compatibility
+.equ WGM11, 1 ; Pulse Width Modulator Select Bit 1
+.equ PWM11, WGM11 ; For compatibility
+.equ COM1B0, 4 ; Comparet Ouput Mode 1B, bit 0
+.equ COM1B1, 5 ; Compare Output Mode 1B, bit 1
+.equ COM1A0, 6 ; Comparet Ouput Mode 1A, bit 0
+.equ COM1A1, 7 ; Compare Output Mode 1A, bit 1
+
+; TCCR1B - Timer/Counter1 Control Register B
+.equ CS10, 0 ; Clock Select bit 0
+.equ CS11, 1 ; Clock Select 1 bit 1
+.equ CS12, 2 ; Clock Select1 bit 2
+.equ WGM12, 3 ; Waveform Generation Mode Bit 2
+.equ CTC1, WGM12 ; For compatibility
+.equ WGM13, 4 ; Waveform Generation Mode Bit 3
+.equ ICES1, 6 ; Input Capture 1 Edge Select
+.equ ICNC1, 7 ; Input Capture 1 Noise Canceler
+
+; TCCR1C - Timer/Counter1 Control Register C
+.equ FOC1B, 6 ; Force Output Compare for Channel B
+.equ FOC1A, 7 ; Force Output Compare for Channel A
+
+
+; ***** CPU **************************
+; SREG - Status Register
+.equ SREG_C, 0 ; Carry Flag
+.equ SREG_Z, 1 ; Zero Flag
+.equ SREG_N, 2 ; Negative Flag
+.equ SREG_V, 3 ; Two's Complement Overflow Flag
+.equ SREG_S, 4 ; Sign Bit
+.equ SREG_H, 5 ; Half Carry Flag
+.equ SREG_T, 6 ; Bit Copy Storage
+.equ SREG_I, 7 ; Global Interrupt Enable
+
+; SPL - Stack Pointer Low
+.equ SP0, 0 ; Stack pointer bit 0
+.equ SP1, 1 ; Stack pointer bit 1
+.equ SP2, 2 ; Stack pointer bit 2
+.equ SP3, 3 ; Stack pointer bit 3
+.equ SP4, 4 ; Stack pointer bit 4
+.equ SP5, 5 ; Stack pointer bit 5
+.equ SP6, 6 ; Stack pointer bit 6
+.equ SP7, 7 ; Stack pointer bit 7
+
+; MCUCR - MCU Control Register
+.equ SM0, 3 ; Sleep Mode Select Bit 0
+.equ SM1, 4 ; Sleep Mode Select Bit 1
+.equ SE, 5 ; Sleep Enable
+.equ PUD, 6 ;
+
+; MCUSR - MCU Status Register
+.equ PORF, 0 ; Power-on reset flag
+.equ EXTRF, 1 ; External Reset Flag
+.equ BORF, 2 ; Brown-out Reset Flag
+.equ WDRF, 3 ; Watchdog Reset Flag
+
+; OSCCAL - Oscillator Calibration Value
+.equ CAL0, 0 ; Oscillator Calibration Value Bit0
+.equ CAL1, 1 ; Oscillator Calibration Value Bit1
+.equ CAL2, 2 ; Oscillator Calibration Value Bit2
+.equ CAL3, 3 ; Oscillator Calibration Value Bit3
+.equ CAL4, 4 ; Oscillator Calibration Value Bit4
+.equ CAL5, 5 ; Oscillator Calibration Value Bit5
+.equ CAL6, 6 ; Oscillator Calibration Value Bit6
+.equ CAL7, 7 ; Oscillator Calibration Value Bit7
+
+; GPIOR2 - General Purpose I/O Register 2
+.equ GPIOR20, 0 ;
+.equ GPIOR21, 1 ;
+.equ GPIOR22, 2 ;
+.equ GPIOR23, 3 ;
+.equ GPIOR24, 4 ;
+.equ GPIOR25, 5 ;
+.equ GPIOR26, 6 ;
+.equ GPIOR27, 7 ;
+
+; GPIOR1 - General Purpose I/O Register 1
+.equ GPIOR10, 0 ;
+.equ GPIOR11, 1 ;
+.equ GPIOR12, 2 ;
+.equ GPIOR13, 3 ;
+.equ GPIOR14, 4 ;
+.equ GPIOR15, 5 ;
+.equ GPIOR16, 6 ;
+.equ GPIOR17, 7 ;
+
+; GPIOR0 - General Purpose I/O Register 0
+.equ GPIOR00, 0 ;
+.equ GPIOR01, 1 ;
+.equ GPIOR02, 2 ;
+.equ GPIOR03, 3 ;
+.equ GPIOR04, 4 ;
+.equ GPIOR05, 5 ;
+.equ GPIOR06, 6 ;
+.equ GPIOR07, 7 ;
+
+; PRR - Power Reduction Register
+.equ PRADC, 0 ; Power Reduction ADC
+.equ PRUSI, 1 ; Power Reduction USI
+.equ PRTIM0, 2 ; Power Reduction Timer/Counter0
+.equ PRTIM1, 3 ; Power Reduction Timer/Counter1
+
+; CLKPR - Clock Prescale Register
+.equ CLKPS0, 0 ; Clock Prescaler Select Bit 0
+.equ CLKPS1, 1 ; Clock Prescaler Select Bit 1
+.equ CLKPS2, 2 ; Clock Prescaler Select Bit 2
+.equ CLKPS3, 3 ; Clock Prescaler Select Bit 3
+.equ CLKPCE, 7 ; Clock Prescaler Change Enable
+
+
+; ***** BOOT_LOAD ********************
+; SPMCSR - Store Program Memory Control Register
+.equ SPMEN, 0 ; Store Program Memory Enable
+.equ PGERS, 1 ; Page Erase
+.equ PGWRT, 2 ; Page Write
+.equ RFLB, 3 ; Read fuse and lock bits
+.equ CTPB, 4 ; Clear temporary page buffer
+
+
+
+; ***** LOCKSBITS ********************************************************
+.equ LB1, 0 ; Lockbit
+.equ LB2, 1 ; Lockbit
+
+
+; ***** FUSES ************************************************************
+; LOW fuse bits
+.equ CKSEL0, 0 ; Select Clock source
+.equ CKSEL1, 1 ; Select Clock source
+.equ CKSEL2, 2 ; Select Clock source
+.equ CKSEL3, 3 ; Select Clock source
+.equ SUT0, 4 ; Select start-up time
+.equ SUT1, 5 ; Select start-up time
+.equ CKOUT, 6 ; Clock Output Enable
+.equ CKDIV8, 7 ; Divide clock by 8
+
+; HIGH fuse bits
+.equ BODLEVEL0, 0 ; Brown-out Detector trigger level
+.equ BODLEVEL1, 1 ; Brown-out Detector trigger level
+.equ BODLEVEL2, 2 ; Brown-out Detector trigger level
+.equ EESAVE, 3 ; EEPROM memory is preserved through the Chip Erase
+.equ WDTON, 4 ; Watchdog Timer always on
+.equ SPIEN, 5 ; Enable Serial Program and Data Downloading
+.equ DWEN, 6 ; DebugWIRE Enable
+.equ RSTDISBL, 7 ; External Reset disable
+
+; EXTENDED fuse bits
+.equ SELFPRGEN, 0 ; Self-Programming Enable
+
+
+
+; ***** CPU REGISTER DEFINITIONS *****************************************
+#define XH = r27
+#define XL = r26
+#define YH = r29
+#define YL = r28
+#define ZH = r31
+#define ZL = r30
+
+
+
+; ***** DATA MEMORY DECLARATIONS *****************************************
+.equ FLASHEND, 0x03ff ; Note: Word address
+.equ IOEND, 0x003f
+.equ SRAM_START, 0x0060
+.equ SRAM_SIZE, 128
+.equ RAMEND, 0x00df
+.equ XRAMEND, 0x0000
+.equ E2END, 0x007f
+.equ EEPROMEND, 0x007f
+.equ EEADRBITS, 7
+#pragma AVRPART MEMORY PROG_FLASH 2048
+#pragma AVRPART MEMORY EEPROM 128
+#pragma AVRPART MEMORY INT_SRAM SIZE 128
+#pragma AVRPART MEMORY INT_SRAM START_ADDR 0x60
+
+
+
+; ***** BOOTLOADER DECLARATIONS ******************************************
+.equ NRWW_START_ADDR, 0x0
+.equ NRWW_STOP_ADDR, 0x3ff
+.equ RWW_START_ADDR, 0x0
+.equ RWW_STOP_ADDR, 0x0
+.equ PAGESIZE, 16
+
+
+
+; ***** INTERRUPT VECTORS ************************************************
+.equ EXT_INT0addr, 0x0001 ; External Interrupt Request 0
+.equ PCI0addr, 0x0002 ; Pin Change Interrupt Request 0
+.equ PCI1addr, 0x0003 ; Pin Change Interrupt Request 1
+.equ WATCHDOGaddr, 0x0004 ; Watchdog Time-out
+.equ ICP1addr, 0x0005 ; Timer/Counter1 Capture Event
+.equ OC1Aaddr, 0x0006 ; Timer/Counter1 Compare Match A
+.equ OC1Baddr, 0x0007 ; Timer/Counter1 Compare Match B
+.equ OVF1addr, 0x0008 ; Timer/Counter1 Overflow
+.equ OC0Aaddr, 0x0009 ; Timer/Counter0 Compare Match A
+.equ OC0Baddr, 0x000a ; Timer/Counter0 Compare Match B
+.equ OVF0addr, 0x000b ; Timer/Counter0 Overflow
+.equ ACIaddr, 0x000c ; Analog Comparator
+.equ ADCCaddr, 0x000d ; ADC Conversion Complete
+.equ ERDYaddr, 0x000e ; EEPROM Ready
+.equ USI_STRaddr, 0x000f ; USI START
+.equ USI_OVFaddr, 0x0010 ; USI Overflow
+
+.equ INT_VECTORS_SIZE, 17 ; size in words
+
+#endif /* _TN24DEF_INC_ */
+
+; ***** END OF FILE ******************************************************